Alan ocs Posted April 20, 2013 Share Posted April 20, 2013 Guys, I would like some help to build my hackintosh. I have a ASUS A43E laptop with: Intel Sandy Bridge i7 2640M 2.80Ghz chipset HM65 Graphics Intel HD 3000 (GT2+) Maximum resolution 1366 x 768 Memory 8GB HD SSD OCZ 120GB Intel ® Express Chipset Mobile SATA AHCI Controller Realtek ALC269 High Definition Audio Ethernet Atheros AR8151 v2 Wireless Atheros AR9285 I also extract the dsdt with dsdt editor, and I applied the sand bridge patchs, but, I think this wont works, if possible, could you correct for me please? A43E.rar = DSDT without patchs. Well, At the system side, I have a vmware with 10.8.3 and a external drive partitioned to make a bootable installation. I'm using MyHack to build that. How can I do to create the installation partition most compatible possible? Whats kexts I need to use? (RTC, cmos prevent, powermnagmente, fakesmc, ...) Because I tried a several times with various kexts and I won't works fine. the boot.plist I use the most simple possible, like a verbose, graphicsenabler, smbios and dsdt indication. that is correct for my laptop? The bootloader, I don't know what is better for me, chimera (chameleon, stolen and rebranded) or chameleon. In advance, I appreciate your attention and help. Link to comment Share on other sites More sharing options...
EMlyDinEsH Posted April 25, 2013 Share Posted April 25, 2013 Hello, We're happy to help you with your hackintosh. First, let us know about your status completely so far what you did? Are you able to boot with myhack created USB installer? What flags you did use so far to boot from it? Did you finish installation? Do you wish to dual boot? Tell us exactly your issue plz since your details aren't enough about the installation above. Get me a dump from windows according to this thread so i can patch your dsdt/ssdt files:https://osxlatitude.com/index.php?/topic/1945-dsdtssdt-patching/ 1 Link to comment Share on other sites More sharing options...
Alan ocs Posted April 25, 2013 Author Share Posted April 25, 2013 Hello Emly Dinesh, thanks for your reply and help. I had a lot of problems with the installation that I had. Then, I decided to delete everything I had and start from the beginning with 10.8.3. Answering your questions: My USB installation was modified by me. Including my dsdt, smbios MacBookPro8,1, and some kexts that I think necessary and did not work. I'll create another without modifications and will do I inform error and flags. At this time, I only have a VMware with Mountain Lion and a External USB with four partitions (MyHack Installation, Clean Mountain Lion, Space for installation, Data and Apps) *GUID Table No, I don't wish a dual boot. Out tonight I'll send to you the dump. [updated: here the files as requested dsdt-ssdt-dump-report.rar] Again, Thanks! Regards, Alan Link to comment Share on other sites More sharing options...
EMlyDinEsH Posted April 26, 2013 Share Posted April 26, 2013 I'll take a look at your dump files and let you know. Link to comment Share on other sites More sharing options...
Alan ocs Posted April 26, 2013 Author Share Posted April 26, 2013 Hello Again, Now I have these partitions: Clean MyHack Installation. M Lion with MyHack extra/fix (Installed by vmware using external drive as physical). M Lion clean for backup. the boot test: First I tried to boot with the M Lion installation, and I got a Kernel Panic with ACPI. I'll try to patch or rollback the ACPI kext. And, with MyHack installation, I tried to boot using some flags and I got installation freezing at this line: [iOBluetoothHCIController][start] -- completed Flags used: -x -v -f -v -x -v npci=0x2000 USBBusFix=yes -x -v npci=0x3000 In this case, I'll search for a solution. Again, Thanks. Regards, Alan Link to comment Share on other sites More sharing options...
EMlyDinEsH Posted April 26, 2013 Share Posted April 26, 2013 Here are the patched dsdt/ssdt files. Did you install Mountain Lion (or) still trying to install using myhack installer? I'm confused with your answers. If you are still trying to install, then use the patched dsdt i sent to the USB Extra folder and remove the GraphicsEnabler flag from boot.plist if you have. And try to use these flags "-x -v" and let me know the error if you get. Don't use the SSDT files yet. First, tell me whether you have installed Mountain Lion or not using myhack Installer? DSDT_SSDT_Patched.zip 1 Link to comment Share on other sites More sharing options...
Alan ocs Posted April 26, 2013 Author Share Posted April 26, 2013 First of all, thanks for the patched dsdt/ssdt. At this momento, yes, I'm still trying to install using myhack installer. For better explanation, My current scenario is: Internal HDD (MBR Partition Table) with Windows 8 using vmware to run a Mountain Lion system. External HDD (Guid Partition Table) into VMware as physical. Using VMWare I made four HFS+ partitions: Partition 1 - 10.8.3 installation created by MyHack withou modification and with Charmeleon. Partition 2 - 10.8.3 System clean, installed by virtual Mac machine. Without vmware tools Partition 3 - 10.8.3 clonne of the Partition 2 and I run; Generate Extra and Myfix by MyHack. Partition 4 - Free space for installation. this way, when I boot from external HD. I have two chances to boot. Sorry for my english and thanks for your attention and help. I'll test as soon as I can. Regards, Alan Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted April 27, 2013 Administrators Share Posted April 27, 2013 im not sure if my Hack plays nice with VM's Link to comment Share on other sites More sharing options...
Alan ocs Posted April 27, 2013 Author Share Posted April 27, 2013 im not sure if my Hack plays nice with VM's Bronxteck, I only uses VMWare to create a install boot disk. How is best way for me to do it? Link to comment Share on other sites More sharing options...
Alan ocs Posted April 27, 2013 Author Share Posted April 27, 2013 Here are the patched dsdt/ssdt files. Did you install Mountain Lion (or) still trying to install using myhack installer? I'm confused with your answers. If you are still trying to install, then use the patched dsdt i sent to the USB Extra folder and remove the GraphicsEnabler flag from boot.plist if you have. And try to use these flags "-x -v" and let me know the error if you get. Don't use the SSDT files yet. First, tell me whether you have installed Mountain Lion or not using myhack Installer? EMlyDinEsH, I created USB boot with myhack and your dsdt. (Using vmware osx) I Booted my A43E with this external drive and MyHack runs fine. I formatted a install area using diskutility and I run the install osx. At the end of install, OSX shows a error, informing that install failed. I thought in I create a install USB disk manually. What the basic kexts I need to replace? Again, Thanks. Regards, Alan Link to comment Share on other sites More sharing options...
Recommended Posts