CruelVampiro Posted June 19, 2011 Author Share Posted June 19, 2011 Yes, im sure, may be not the first time but the next 3 times i selected option 4. :S it seems to be a weird error. Now im trying to do my 5th installation. Coud it be a bios configuration error? make sure you ran the correct d620 model build intel gma graphics is option4 in edp 1.8. Intel GMA 950: Chipset Model: GMA 950 Type: GPU Bus: Built-In Slot: Built in VRAM (Total): 64 MB of Shared System Memory Vendor: Intel (0x8086) Device ID: 0x27a2 Revision ID: 0x0003 Displays: Display: Resolution: 1280 x 800 Pixel Depth: 32-Bit Color (ARGB8888) Main Display: Yes Mirror: Off Online: Yes Built-In: Yes Display Connector: Status: No Display Connected Link to comment Share on other sites More sharing options...
hfs3 Posted June 20, 2011 Share Posted June 20, 2011 make sure you ran the correct d620 model build intel gma graphics is option4 in edp 1.8. Intel GMA 950: Chipset Model: GMA 950 Type: GPU Bus: Built-In Slot: Built in VRAM (Total): 64 MB of Shared System Memory Vendor: Intel (0x8086) Device ID: 0x27a2 Revision ID: 0x0003 Displays: Display: Resolution: 1280 x 800 Pixel Depth: 32-Bit Color (ARGB8888) Main Display: Yes Mirror: Off Online: Yes Built-In: Yes Display Connector: Status: No Display Connected I did that, but here's what I get: nVidia Graphics Card: Chipset Model: nVidia Graphics Card Type: GPU Bus: Built-In VRAM (Total): 128 MB Vendor: Intel (0x8086) Device ID: 0x27a2 Revision ID: 0x0003 ROM Revision: Silent Natit x86_64 v1.0.2 Displays: Display: Resolution: 1280 x 800 Pixel Depth: 32-Bit Color (ARGB8888) Main Display: Yes Mirror: Off Online: Yes Built-In: Yes Display Connector: Status: No Display Connected What do you think, run EDP 1.8 again? Henry Link to comment Share on other sites More sharing options...
CruelVampiro Posted June 20, 2011 Author Share Posted June 20, 2011 I tried reinstalling EDP 1.8, but still nothing Link to comment Share on other sites More sharing options...
hfs3 Posted June 20, 2011 Share Posted June 20, 2011 I tried reinstalling EDP 1.8, but still nothing Ditto... Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted June 20, 2011 Administrators Share Posted June 20, 2011 what methods did you use to get snow working? edp 1.8 does not have Silent Natit x86_64 v1.0.2, delete extra folder and reinstall edp1.8.pkg build again with option 4. if not you have something in s/l/e or an injector or modified kernel if you used another distro to install osx. this works strait vanilla. you can literally make a hdd image from a real mac, install edp and build with your latitude model, install chameleon to it and boot osx. Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted June 20, 2011 Administrators Share Posted June 20, 2011 how can i check if chameleon is on my hdd? i only have mac os in my disk, its a new 500gb WD Scorpio Blue. when i boot ive boot0:error and when i do fdisk -e /dev/rdisk0 to set my partition active i ve got fdisk: could not open MBR file /usr/standalone/i386/boot0: No such file or directory what version chameleon pkg are you using, also why is it looking for mbr. did you format it with guid with osx extended journaled? Link to comment Share on other sites More sharing options...
CruelVampiro Posted June 20, 2011 Author Share Posted June 20, 2011 As the chameleon on the EDP 1.8 does not wokr ive tried 1021 and now 1028, tried RC3 and RC4... non of them work. Ive tried converting to MBR, hybrid gpt/mbr by gptsync, and now i was trying to activate my mac os partition. with fdisk -e to see if it could work but nothing. I installed mac os with SLD430USB.img.bz2 later installed chameleon rc5 635 from the wiki edp 1.8 everything works fine but boot. i booted into mac os with the usb updated to 10.6.7 with combo and when it finished update no QE and no boot, only with usb stick. Link to comment Share on other sites More sharing options...
CruelVampiro Posted June 20, 2011 Author Share Posted June 20, 2011 I installed osx 10.6.0 with SLD430USB.img.bz2 againt and installed only EDP1.8 kext option 4 (dell d620 Ingel GMA950 + chameleon rc5 747 included in EDP1.8 and when reboot i see boot0 gpt boot0 test boot0 test boot0 error. Need to boot with usb stick again Link to comment Share on other sites More sharing options...
hspadoni Posted June 20, 2011 Share Posted June 20, 2011 what methods did you use to get snow working? edp 1.8 does not have Silent Natit x86_64 v1.0.2, delete extra folder and reinstall edp1.8.pkg build again with option 4. if not you have something in s/l/e or an injector or modified kernel if you used another distro to install osx. this works strait vanilla. you can literally make a hdd image from a real mac, install edp and build with your latitude model, install chameleon to it and boot osx. I used a 10.6 retail disk (purchased) and Leppy's method to get to 10.6, then installed Chameleon 2 RC5 along with EDP 1.8, then updated to 10.6.7. I was unable to get the USB pen method outlined on Wiki to work, but will try it again with the D620 as the maker (since it's mostly operational Link to comment Share on other sites More sharing options...
CruelVampiro Posted June 20, 2011 Author Share Posted June 20, 2011 I used a 10.6 retail disk (purchased) and Leppy's method to get to 10.6, then installed Chameleon 2 RC5 along with EDP 1.8, then updated to 10.6.7. I was unable to get the USB pen method outlined on Wiki to work, but will try it again with the D620 as the maker (since it's mostly operational Where can i find the leppy's method?? I ll try it later. So tomorrow i ll be posting news xD Link to comment Share on other sites More sharing options...
Recommended Posts