Jump to content

cannot get sound to work on d430 lion


robi62

Recommended Posts

Hi I just installed lion on my d430 and funnily enough it works like a treat.

my broad com wifi works oob cookbook works too;it seems quicker than snow but no luck with sound.

I tried deleting apple hda from s/l/e no luck

I put voodoo had plus hda disabler in e/e and not working either

Any ideas?????

All are stock kexts the only ones I have installed are fake smc voodoo keyboard and mouse ,voodootsync ,null cpumanagment
AppleBCM5751Ethernet for lan and voodoo battery

This are my kext loaded at start up:

 

  Reveal hidden contents

 

 

 

And this is log in kernel log:

ul 24 23:59:54 localhost kernel[0]: Kext org.voodoo.driver.VoodooHDA - library kext com.apple.iokit.IOAudioFamily not found.
Jul 24 23:59:54 localhost kernel[0]: Can't load kext org.voodoo.driver.VoodooHDA - failed to resolve library dependencies.
Jul 24 23:59:54 localhost kernel[0]: Kext org.voodoo.driver.VoodooHDA failed to load (0xdc00800e).
Jul 24 23:59:54 localhost kernel[0]: Failed to load kext org.voodoo.driver.VoodooHDA (error 0xdc00800e).
Jul 24 23:59:54 localhost kernel[0]: Couldn't alloc class "VoodooHDADevice"

Link to comment
Share on other sites

This is how I installed it

 

I used the guide from here

http://hacklions.blogspot.com/

 

Then instead of using chimera (chameleon, stolen and rebranded) I installed chameleon v2 rc5 1096 pkg

 

I omitted the part with multi beast

 

I copied folder extra from my snow hdd with edp 1.8 but removed all extensions all I have in extra is fake smc nullcpupowermanagment and voodoo next for keyboard and mouse.

 

I rebooted from lion installdvd and installed lion on my usb 320gb disk which has 4 partitions

 

1 lion dvd

2 a back up of my snow

3 lion this is where I installed

4snow leopard dvd

 

It finished installation and when i rebooted i was surprised to see It had actually booted up

filled all my details etc etc

and here we are on working lion

 

I installled coolbook to have speedstep and that is it

 

then I installed the next to get ethernet working

First thoughts

 

It seems quite stable and quick considering I only have 1.5gb of ram

it only boots with -v

I think dstd needs to be adjusted to get more brightness for lcd is not as bright as in snow

Fan seems to be working at most of times even if I switch it off with fn+z trick

This is the photo of about my mac

PS geekbench mark is higher in lion than in snow 1693 in lion 1638 in snow

lion.tiffFetching info...

Edited by robi62
Link to comment
Share on other sites

I have all things working on my d430, but I just used Chameleon 2 RC5 r1213 and EDP 1.9

I had this same issue with verbose boot but, after one or two tries, it boots normal now.

Also, there is this AppleIntelIntegratedFramebuffer.kext out of SnowLeo which should solve the screen brightness issue. At least it does in my Lion. Sound was working fine from start on.

 

Give Chameleon 1213 and EDP 1.9 a try. If you wish, I can post my /Extra folder for you to try.

Link to comment
Share on other sites

  On 8/1/2011 at 9:15 PM, Zeppo said:

I attached Chameleon 1213 as well.

Thanks man. Works like a champ. One last thing. When you first went through the install was it extremely sluggish trying to move mouse and type until you installed EDP 1.9? Can you post your installation Extra folder also.

Link to comment
Share on other sites

  On 8/3/2011 at 2:56 PM, JeffJ said:

Thanks man. Works like a champ. One last thing. When you first went through the install was it extremely sluggish trying to move mouse and type until you installed EDP 1.9? Can you post your installation Extra folder also.

 

Bronx already gave you an answer for sluggishness.

I used the same folder I've sent you to install Lion. No issues whatsoever.

Link to comment
Share on other sites

×
×
  • Create New...