mandy32 Posted November 22, 2013 Share Posted November 22, 2013 Booting problem with Mountain Lion bootpack and EDP on D630 Any help as to why the good old pre-configured EDP for D60 NVidia makes the booting hangs at [ PCI configuration begin ] at reboot after running the EDP tool post installation. Also audio and video not working this time after a clean installation Any pointers in the right direction from what I am doing wrong this time to fix this would be much appreciated. Thanks Latitude D630, BIOS A18, T7500 2.2GHz, 4Gig DDR2-800, NVidia Quadro NVS 135M Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted November 23, 2013 Administrators Share Posted November 23, 2013 do you have intel wifi? if so turn it off in bios. and check if data is set to ahci 1 Link to comment Share on other sites More sharing options...
mandy32 Posted November 23, 2013 Author Share Posted November 23, 2013 @Bronxteck Thanks mate I nearly send you a PM earlier but on second thought I wanted to share the solution with anyone who might have a similar problem. so I posted it on the forum. No not Intel, I have a Broadcom dw1490 Wi-Fi which has always work with my dual boot of Mountain Lion and Windows 8 on this same system until this hard drive change not even SSD same normal HHD I normally have the bios set to AHCI with default but to confirm I am doing as a you advice now. Thanks Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted November 23, 2013 Administrators Share Posted November 23, 2013 just pulled that from mine. D630N_Extra.zip 1 Link to comment Share on other sites More sharing options...
mandy32 Posted November 23, 2013 Author Share Posted November 23, 2013 Still here I have just finished a Maverick installation on the same machine and everything is working perfect on the Maverick I am now going to swap the hard drive and put the ML back in the D630 to try. Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted November 23, 2013 Administrators Share Posted November 23, 2013 yeah I'm also running maverick on it Link to comment Share on other sites More sharing options...
mandy32 Posted November 23, 2013 Author Share Posted November 23, 2013 @ Bronxteck Thanks for the Extra zip I 'll try it and get back to you You know the system reboot fine with the Extra from the bootpack until I run the EDP and if I encounter this PCI configuration begin error I then use the installer to inject the Extra folder back only to get the machine to reboot normal again but without the EDP configuration Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted November 23, 2013 Administrators Share Posted November 23, 2013 hmm weird. are doing a custom config or something? Link to comment Share on other sites More sharing options...
mandy32 Posted November 23, 2013 Author Share Posted November 23, 2013 @ Bronxteck No luck after running the EDP and after confirming the AHCI set in the bios I am trying your Extra now wish me luck. Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted November 23, 2013 Administrators Share Posted November 23, 2013 im typing from it now so i know it works. did you mess with s/l/e ? Link to comment Share on other sites More sharing options...
Recommended Posts