hasscom9311 Posted August 30, 2014 Share Posted August 30, 2014 Hello i need some help here ...i Cannot seem to install Os x on my inpsiron 1520 it has a x3100 gpu which i have seen similar specs machines running osses like mountain lion or lion smoothly i once managed to get snow leopard working with wifi,also full qe/ci hardware acceleration. but can someone please provide me a boot pack for both mountain lion and lion please ...The admin Herve i know he can help me and i hope someone else can too as i know Very well this laptop can run it and i dont mind running it in 32 bit also if i have to get it working ...now i read in other thread before making this one that the dell d630 or dell d830 bootpack should work .well it dont and i tried messing around with the kexts like swapping them around etc still no joy my main place where it gets stuck is ioapic vector it hangs there or a kernel panic ... please if someone can me a boot pack for the laptop would appeciate it very much Link to comment Share on other sites More sharing options...
hasscom9311 Posted September 2, 2014 Author Share Posted September 2, 2014 Dear herve The admin Of the site ..I Have done Extensive Checking and research and You mention that the Dell d630 intel Bootpack or even D620 would work on the Inpiron 1520 ..I have tried all Diffrent Combinations of Bootpacks and i cannot get it to work ..Can you give me Some sort of Suggestion on how I Can Run Lion ,Mountain or Mavericks on my Inspiron 1520 x3100 crestline ? So far i managed to Install Snow leopard 10.6.3 But using a Distro Made by iFail And i Would Really prefer to use My hack Method to install as its more Stable from my Experience on other Laptops. Please can you Help sir? Link to comment Share on other sites More sharing options...
Administrators Hervé Posted September 2, 2014 Administrators Share Posted September 2, 2014 Well, if I said those bootpacks should work, I meant the kexts and Chameleon/SMBIOS plists but not necessarily the DSDT table (that's very model specific). So, if you've use the packs "as is", yes, I would not be surprised you encountered problems. 1st try with the Generic bootpack. If you manage to boot the installer and install OS X (SL or Lion), then post the output of Terminal command lspci -nn. This will show us the precise hardware pieces of your Inspiron 1520 (well the large majority of it) and we'll take it from there. NB: with Intel GMA X3100 graphics, you can only run 32bit kernel mode or you won't have any graphic acceleration (i.e.full QE/CI). But there's nothing wrong with running in 32bit kernel mode. Link to comment Share on other sites More sharing options...
hasscom9311 Posted September 2, 2014 Author Share Posted September 2, 2014 Last login: Tue Sep 2 17:49:39 on ttys000 ds-macbook:~ d$ lspci -nn pcilib: 0000:00:02.0 64-bit device address ignored. 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 0c) 00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 0c) 00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) 00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) 00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02) 00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 02) 00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) 00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) 00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) 00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f2) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 02) 00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 02) 00:1f.2 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02) 0c:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01) ds-macbook:~ d$ This is the Output Sir Link to comment Share on other sites More sharing options...
Administrators Hervé Posted September 2, 2014 Administrators Share Posted September 2, 2014 Ok, so where are you at now? Link to comment Share on other sites More sharing options...
hasscom9311 Posted September 2, 2014 Author Share Posted September 2, 2014 i managed to install lion but i would prefer to run mountain lion if possible i understand it will have to remain 32bit but its fine as long as i have full hardware accelaration ...i used this link https://osxlatitude.com/index.php?/topic/2464-dell-latitude-d630-intel-gma-x3100-ml-with-full-qeci/ the hi res pack as the low res one failed froze when installing but with the hi res pack from the link above all seems working apart from graphics no qe/ci or screen resoloution capabilities Link to comment Share on other sites More sharing options...
Administrators Hervé Posted September 3, 2014 Administrators Share Posted September 3, 2014 Use whatever pack (=/Extra) you're currently using for your Lion installation. As I said, the packs posted for other models contain model-specific DSDTs. Don't expect that to work on your own Inspiron 1520. You can follow the same process as explained in the guides, but use your current /Extra as a pack instead. Link to comment Share on other sites More sharing options...
hasscom9311 Posted September 3, 2014 Author Share Posted September 3, 2014 last night i managed to install mountain lion and update it fully to 10.8.5 and everything works fine apart from graphics ,i cannot get full graphics Hardware Qe/Ci Yet And the only pack which manages to work is the one i mentioned above ... the high res pack from the link above ,But again apart from that the machine is Running very nice all components working just cannot get the gpu to run full power and i cant even find a pre made dsdt file specific for my machine Link to comment Share on other sites More sharing options...
hasscom9311 Posted September 3, 2014 Author Share Posted September 3, 2014 dear herve i really appreciate the time you take to reply back ,but What can i do to get this Gpu working ? Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted September 3, 2014 Administrators Share Posted September 3, 2014 x3100 is not natively supported in ML.... lion is the last official os to support it in 32bit arch. Link to comment Share on other sites More sharing options...
Recommended Posts