Jump to content
simon11

Lenovo T430i Mavericks boot fail

Recommended Posts

Lenovo T430i

Machine Model: 2344BDG

CPU: Intel Core i3-3110M

IvyBridge

Memory (1x): 4096mb

 

Hi,

 

I'm really struggling at the moment and need some help.

I have completed the installation using MyHack / Mavericks / Bootpack for T430.

 

Completed the installation following http://www.osxlatitude.com/edp/documentation/

Right through the end.

 

Boots into Mavericks and completed installation of EDP using Lenovo T430.

 

I have a T430i which is practically the T430 but with an i3 processor. I have a HD4000.

 

I made a boot key with my hack and then ran installation again to add the Extra folder downloaded in bootpack for T430.

 

I would really appreciate some help to get me further.

 

With great thanks to anyone that can help as need Mavericks for work.

 

Please see the boot screen:

 

post-70780-0-95339000-1419347051_thumb.jpg

Share this post


Link to post
Share on other sites

Boot with the USB Installer, select myHack from the menu bar. From myHack, select Install Extra, point the Destination to your . Select Use My Own and point to the Extra Folder of the USB Installer. When finished, reboot.

Share this post


Link to post
Share on other sites

Thank you so much for your quick reply.

 

I have followed your steps and I am getting the following boot screen. 

It looks like it has taken me further into the boot process but still no luck :(

 
 

 

post-70780-0-27948800-1419349424_thumb.jpg

Share this post


Link to post
Share on other sites

Thanks Jake.

I installed NullCPUPowerManagement.kext through safe mode and Mavericks is booting correctly.

Everything looks good except for bluetooth, but I will have to do some more digging to resolve this.

 

Thanks again for all your help.

Share this post


Link to post
Share on other sites

I'm having this exact same issue with my T430i, however the fix of placing NullCPUPowerManagement.kext back does not seem to fix the issue, unless I'm doing it wrong. So basically after booting into Safe mode like the OP, I was only then able to get past the Bluetooth issue and install the post EDP utility. Once I rebooted I received the same Kernel Panic as the OP, so I booted back into Safe mode, and copied the Null kext from the Extra folder on the iHack USB key, to the Extra folder on the OS X drive. I then ran the iHack fix to repair permissions... but when I reboot, I get the same Kernel Panic. 

 

I've tried reinstalling with the same issue and now I'm lost what to try. Thanks in advance for any suggestions and help, much appreciated. 

Share this post


Link to post
Share on other sites

I assume you have copied it to /Extra/Extensions but you won't be able to run myHack/myfix from Safe mode.

Boot back into SafeMode, launch terminal and run this

 

myfix -q -t /

Share this post


Link to post
Share on other sites

×
×
  • Create New...