utendar Posted July 29, 2015 Share Posted July 29, 2015 Hi all, After following Jake's guide I was able to successfully install Yosemite on a Latitude E6320. However I am having a few minor issues: Trackpad right click does not work (automatically act as control-click). I connected a USB mouse and still no right click. I followed the same build process on a 6420 and right click worked there so the issue appear to be my installation/settings USB mouse middle wheel scrolling is reversed as in Windows, is this normal? Web cam not working but microphone/audio is fine. I've updated OS X to 10.10.4 and reinstalled the .kext files in Jake's guide but the issues persist. Thank you. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted July 29, 2015 Moderators Share Posted July 29, 2015 See Hervé's guide here for this very model. it's for Mavericks, but try the keyboard/mouse kext from his bootpack. It also mentioned that webcam is an issue for that model depending on chipset it has that might or not be supported. Link to comment Share on other sites More sharing options...
Administrators Hervé Posted July 29, 2015 Administrators Share Posted July 29, 2015 Re: webcam, I never got to the bottom of this as I'm relying on E6320 owners feedback on hardware device ids. If you could provide your webcam ids (visible in the Sys Profiler), that'd be appreciated. Link to comment Share on other sites More sharing options...
utendar Posted July 30, 2015 Author Share Posted July 30, 2015 Jake/Herve, Thank you for your responses. About the trackpad/mouse, I just figured out that right click actually does work after system reboot but only for a few minutes then it stops working. I tried Herve's kext and it is showing the same behavior; ditto with middle button scroll. Here's the camera info from System Profiler: Laptop_Integrated_Webcam_HD: Model ID: UVC Camera VendorID_3141 ProductID_25651 Unique ID: 0x1a1500000c456433 Link to comment Share on other sites More sharing options...
Administrators Hervé Posted July 30, 2015 Administrators Share Posted July 30, 2015 Ok, so that's Vendor 0x0c45 / Device 0x6433, i.e. the Sonix HD Webcam as in my E6320 guide. If you could extract your raw DSDT + raw IOReg and post them, we might be able to get that webcam to work. Which DSDT are you using right now? Link to comment Share on other sites More sharing options...
utendar Posted August 5, 2015 Author Share Posted August 5, 2015 Here is a copy of IOReg, I hope I am doing this right. DSDT is from Jake's guide, original file name DSDT-E6320.aml Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted August 5, 2015 Moderators Share Posted August 5, 2015 No file attached... Link to comment Share on other sites More sharing options...
Administrators Hervé Posted August 5, 2015 Administrators Share Posted August 5, 2015 We need a raw IOReg + extracted raw DSDT. An existing patched DSDT file is of no use here. Link to comment Share on other sites More sharing options...
utendar Posted August 7, 2015 Author Share Posted August 7, 2015 Apologies, was getting an error when uploading the file earlier. Please see attached. IOReg.zip Link to comment Share on other sites More sharing options...
Recommended Posts