Jump to content
hash

Dell Inspiron 3520 help (El Capitan)

Recommended Posts

Hey Osxlatitude,

I was able to get sound(no mic), trackpad, full display and approx everything other then network(wifi and ethernet)

bluetooth works fine but i cant turn it off(button gray out)

 

So i used olarila osx el captain setup with clover dart "GraphicsEnabler=No" for booting and first boot of hackintosh

After i used hackintosh vietnam tool and use use best config describe with option of hd3000 graphics on 7 series, and kext (sound vodoohda works, touchpad alps, fakesmc)

 

I can't get ethernet and wifi work(don't know why) wifi shows no network found and ethernet does not detect lan 

 

My wifi is "AR5B195" and ethernet card is RealtekRTL8111.kext

 

Please help me to fix it :3

Share this post


Link to post
Share on other sites

i am using clover :)

system same as it https://osxlatitude.com/index.php?/topic/6392-dell-inspiron-3520-i3-2370m-hd3000-i5-3210m-hd4000-mountain-lionmavericks/ 

00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09)
00:16.0 Communication controller [0780]: Intel Corporation Panther Point MEI Controller #1 [8086:1e3a] (rev 04)
00:1a.0 USB controller [0c03]: Intel Corporation Panther Point USB Enhanced Host Controller #2 [8086:1e2d] (rev 04)
00:1b.0 Audio device [0403]: Intel Corporation Panther Point High Definition Audio Controller [8086:1e20] (rev 04)
00:1c.0 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 1 [8086:1e10] (rev c4)
00:1c.3 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 4 [8086:1e16] (rev c4)
00:1c.5 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 6 [8086:1e1a] (rev c4)
00:1d.0 USB controller [0c03]: Intel Corporation Panther Point USB Enhanced Host Controller #1 [8086:1e26] (rev 04)
00:1f.0 ISA bridge [0601]: Intel Corporation Panther Point LPC Controller [8086:1e5d] (rev 04)
00:1f.2 SATA controller [0106]: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] [8086:1e03] (rev 04)
00:1f.3 SMBus [0c05]: Intel Corporation Panther Point SMBus Controller [8086:1e22] (rev 04)
07:00.0 Network controller : Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express)  (rev 01)
09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) 

just difference is mine hd3000 is on 7 series (only microphone is issue else it good machine) 

Share this post


Link to post
Share on other sites

See here for new LAN kext.

Did not work :3

Right now i am reinstalling el captain(maybe i messed up somewhere so kext are not loading)

and i see there is problem in loading kext(cause no more repair permission) maybe it's related as i never had problem with lan in past(but yeah trackpad,sound work after replacing kext~normally)? 

Share this post


Link to post
Share on other sites

I'm still using this machine happily with Yosemite, however I'd be willing to update to El Cap and help you figure it out. 

 

For wifi, unhide /System/Library/Extensions in El Cap, use Kext Utility to install these kexts into /S/L/E and reboot. Wifi should work after that.

 

Wifi kexts: https://mega.nz/#!2JMm2RAJ!JDPhopjaU4O64T4hrDPuiPJQ1UousKqiC4BEl4zo1bc

 

Edit:

 

JakeLo's method looks much cleaner. I'd give that a shot if you've ever done any DSDT editing.

Share this post


Link to post
Share on other sites

 

You guys are magician :3 both kext did there work :3 i tried wifi kext before but it did'nt worked out now it worked :o

 

(maybe it's cause my clover setting csr-active-config 0x67 = SIP Disabled completely)

 

Rightnow i am fresh installing/updating el captain :3

Share this post


Link to post
Share on other sites

Are you using my DSDT? I have not gone through and updated the DSDT for El Cap, but it shouldn't need much for it to work correctly. It probably doesn't need anything, but I like to be sure. Also, my DSDT is automatically patched for HD3000 on 7 series, so graphics work without any enabler and on native kexts. (Its also patched for sleep, brightness keys, and other Fn keys.)

Built-in microphone will never work. I've tried patching AppleHDA for our card, but I could not make built-in microphone work. Nor could anyone else on other forums. Several have tried though. You can plug in an external microphone to the microphone jack and it will work. Its very quiet but it does work. Be sure to select the proper microphone in System preferences.

 

If you have issues with touchpad clicks, install VoodooPS2 preference pane and set fingerZ to the max. That will calm it down. So far, no amount of plist mods have made the fingerZ settings stick, so you must open that prefpane and max out fingerZ every reboot. Annoying, but tolerable.

 

The LAN kext that JakeLo posted is the exact ethernet kext I am using. I have no idea why its not working for you. Try reinstalling it with Kext Utility to /S/L/E.

 

I'd be interested in your Clover setup, as I've still yet to move over to Clover. I'm still on Chameleon. Can you please send me a compressed copy?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×