mythosmint Posted January 12, 2012 Share Posted January 12, 2012 have you tried removing or disabling the wifi cards if there intel. Yup. I disabled the WIFI card. I tried booting into 64bit like carbon16 talked about in another thread. That seems to work better because I don't get stuck anymore. But now every few boots I get a Kernel panic (attached). I'm gonna try updating to 10.7.2 and also see how the system works in 10.6+ Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted January 12, 2012 Administrators Share Posted January 12, 2012 ok it seemes it's the ethernet card... look closely. it's showing ip adress 0.0.0.0 and it is also trying to do a debug dump to network. shut off ethernet. Link to comment Share on other sites More sharing options...
mythosmint Posted January 12, 2012 Share Posted January 12, 2012 Oh sorry that's just because I added the debug=0x100 Kernel Flag to try to get more information about the KP. I've tried disabling the NIC in bios too. But I still get the KPs or the [PCI Configuration Begin] stuff Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted January 12, 2012 Administrators Share Posted January 12, 2012 then your sata controler is not being detected... sometimes npci=0x2000 and or PciRoot=1 helps or you have to use ioata family from 10.6.7. or dsdt has to be patched for your ich again for some reason. Link to comment Share on other sites More sharing options...
ssprod Posted January 19, 2012 Share Posted January 19, 2012 Greetings, having identical issues with my 630 Nvidia. Screen goes black to desktop, audio working at that point however. Should also add that I've tried editing the bootplist with GraphicsEnabler=no and Graphics Mode=1280x800 (as listed in my bios), still no love. Only work-around is to run 630Intel from EDP, edit bootplist with GraphicsEnabler=yes. Any1 found a true solution, while still using the 630 Nvidia DSDT? Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted January 19, 2012 Administrators Share Posted January 19, 2012 try removing the hardware id injection from the boot.plist use graphics enabler=yes and vbios also i think nvidia needs pciroot=1 use chameleon wizard and save. also update to newest chameleon 1791 or above Link to comment Share on other sites More sharing options...
ssprod Posted January 20, 2012 Share Posted January 20, 2012 After using Cham. Wizard, and applying these suggestions, boot up renders success 4 out of 7 times on average. The remaining 3 result in a black screen, or kp. Any suggestions would be greatly appreciated. Edited in Boot.plist hardware id injection removed graphics enabler=yes vbios (checked) pciroot=1 (checked) Newest Chameleon Link to comment Share on other sites More sharing options...
mythosmint Posted January 20, 2012 Share Posted January 20, 2012 then your sata controler is not being detected... sometimes npci=0x2000 and or PciRoot=1 helps or you have to use ioata family from 10.6.7. or dsdt has to be patched for your ich again for some reason. I think this helped: npci=0x2000 along with upgrade to 10.7.2 and booting in x64bit. However the system was really slow. I wanted to see how 10.6.X worked. In 10.6.7 everything is working flawlessly and very quickly. I will try Lion again when I get some more time (and an ssd) and report back. Thanks for the help! Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted January 21, 2012 Administrators Share Posted January 21, 2012 copy and save your ioatafamily kext while you on 10.6.7 it could come in handy for you on lion to speed things up Link to comment Share on other sites More sharing options...
ssprod Posted January 21, 2012 Share Posted January 21, 2012 copy and save your ioatafamily kext while you on 10.6.7 it could come in handy for you on lion to speed things up 10.7.2 runs alright with the Intel D630 EDP, it's manageable for now, EXCEPT it won't power off completely... any way of dealing with that? By the way Bronx, I do have a stock IOATAfamily.kext from 10.6.7. Would that be useful to you.. you're welcome to it. Thx. ssprod UPDATE: Have edited EDP's latest D630Nvidia DSDT, booting successfully without black screen, however unit does not recognize DVD thx Link to comment Share on other sites More sharing options...
Recommended Posts