Jump to content

Asus N56JR


mariano

Recommended Posts

  • Moderators

Ok, try this. Remove VoodooHDA and AppleHDADisabler if you have them installed.

Make sure you have the vanilla AppleHDA in /S/L/E, restore it if you have removed it.

Install this dummy kext AppleHDA_ALC663 to /S/L/E or /L/E and repair the permission and rebuild cache.

Replace your Config with the attached. It's been added with patches on-the-fly for the AppleHDA. DSDT has been change from layout 28 to 3.

I've included 2 versions, replace with v2 if the first doesn't work. Both patches are from Mirone's collection.

 

Try this for bluetooth

ALC663.zip

IOBluetoothFamily.kext.zip

Link to comment
Share on other sites

Ok. I tried what you said, the result is as follows:

 
1) The sound of PC speakers work .. (I used AppleHDA_ALC663.kext because AppleHDA_ALC663v2.kext did not work well) Now if while I play music, I plug in headphones, you will automatically switch audio to the headset (whereas before I had to select the audio menu.)
But unfortunately now the microphone does not work (I also tried using skype) but nothing. :(
Then if I connect the laptop to the TV with HDMI, the HDMI audio still does not work. :(
 
2) Regarding the bluetooth, instead, with kext you provided me now the "off" is shown but the bluetooth does not work well (I include photos). (Eg if I connect the stereo speakers via Bluetooth, the two devices are coupled but after two seconds disconnecting)  :(
Also shown are coupled strange devices. (See picture ..)
 
 
Some solution?
Thanks very much.

post-88981-0-14755300-1457954054_thumb.png

post-88981-0-21242400-1457954060_thumb.png

post-88981-0-25438500-1457954075_thumb.png

post-88981-0-25792500-1457954085_thumb.png

post-88981-0-36901700-1457954098_thumb.png

IOREG_appleHDA_663.zip

Resoconto_System.zip

system.log.zip

Link to comment
Share on other sites

You are big!

Now the microphone works! :)
But still HDMI audio does not work :( , however, I appear in the menu ( I have attached the picture ) .
I had to remove the CodecCommander.kext because otherwise the notebook would not turn over ( kernel panic )
Now attach the photos .
Thank you so much , you're very strong :)

post-88981-0-21457500-1457979869_thumb.png

post-88981-0-60798500-1457979880_thumb.png

post-88981-0-92975000-1457979901_thumb.png

post-88981-0-64156100-1457979916_thumb.png

IOREG_new.zip

Resoconto_system_new.zip

system_new.log.zip

Link to comment
Share on other sites

I use MacPro3.1 smbios because otherwise the camera is not recognized .. I do not know why ...

 

a few days ago using SM BIOS (MacBookPro11.2) of the EDP ( now enclose ) the camera is not recognized, and at startup when you have to put in your password , the touchpad does not work . However just put the password , the touchpad works, but not the camera .

config (no camera).plist.zip

Link to comment
Share on other sites

×
×
  • Create New...