Moderators Jake Lo Posted June 27, 2016 Moderators Share Posted June 27, 2016 So you're using the E6430 bootpack? It does include a patched DSDT, but it depends on you display resolution. If the display is 1366x768, you should use the E6230 bootpack instead. Link to comment Share on other sites More sharing options...
Igor Belchior Posted June 27, 2016 Share Posted June 27, 2016 Yes, I'm using the E6430 bootpack provided in the aforementioned topic and my screen resolution is 1600x900. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted June 27, 2016 Moderators Share Posted June 27, 2016 so with my bootpack and DSDT, system will crash? what error did it show when it crashed? Link to comment Share on other sites More sharing options...
Igor Belchior Posted June 27, 2016 Share Posted June 27, 2016 It doesn't crash. It works properly, but no Webcam, no iMessage nor Docking station. When I tried to patch those errors using alternate DSDT then the system crashes. What I'm looking for is to fix Webcam, iMessage and Docking station using your DSDT if possible. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted June 27, 2016 Moderators Share Posted June 27, 2016 Did you generate a new smbios with Clover Config? to fix iMessage, try this -run "uuidgen" in terminal and paste the result into the SmUUID block in the SMBIOS page of Clover Configurator -on the same page, copy and paste the contents of the Serial Number block into the Board Serial Number block, adding 5 random HEX characters (digits) to the end webcam could be an USB issue. I'll have check on that, webcam was working OOB for me the last time I checked though. Will confirm later Docking station will be an USB Issue as well, only on El Capitain, Yosemite won't have this issue due to the way El Capitan injects USB devices Link to comment Share on other sites More sharing options...
Igor Belchior Posted June 27, 2016 Share Posted June 27, 2016 Ok. iMessage fixed. I had generated a new smbios but did not run the uuidgen steps Now, here's what happened to my webcam. I installed everything following your guide, during OS X initial configuration the webcam was working, allowing me to take a pic to set as my user account avatar. During the next few hours the webcam was still working, and I could even make a FaceTime call. I closed my computer lid and went to take some rest. When I came back, open the lid and tried another FaceTime call, I got a message saying: no camera available. I didn't change anything from your original topic, as a computer without webcam doesn't refrain me from using it. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted June 27, 2016 Moderators Share Posted June 27, 2016 Check system information, under camera and USB to see if it's listed. Link to comment Share on other sites More sharing options...
Igor Belchior Posted June 27, 2016 Share Posted June 27, 2016 Not listed. EDIT: You're probably right about it being something with the USB. I just notice my USB 3.0 port is not working. 2.0 works just fine. EDIT 2: After restarting USB 3.0 came back to life. EDIT 3: So, I tested DSDT attached. It gives me basically all functionality I had in your DSDT, plus docking station partially working. It won't recognize external monitor in any port (DVI, DP or VGA), but I have ethernet connectivity and USB. DSDT_New.aml.zip Link to comment Share on other sites More sharing options...
Igor Belchior Posted June 29, 2016 Share Posted June 29, 2016 Ok, maybe you can help me to narrow it down. If I use the EFI folder in my installation disk the webcam works, If I change to your generic+E6430 EFI folder it stops. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted June 29, 2016 Moderators Share Posted June 29, 2016 Upload your EFi from your installation disk. Link to comment Share on other sites More sharing options...
Recommended Posts