MrComputer Posted June 18, 2016 Share Posted June 18, 2016 Hey everyone, Over the past few days everyone has been helping me get this thing running. I just wanted to say thanks again for that. That being said: DELL LATITUDE | E5430 i3 Processor: i3 2328m sandybridge Graphics: HD3000 Lan - UNKNOWN - non working - will update with more info Wifi Module: BCM94313HMG2L - BROADCOM - REPLACED WITH BCM43225HMB AUDIO: 92hd93 - non working 1X HDMI - non working 1X VGA - working 1X SD - non working - will update with more info Link to comment Share on other sites More sharing options...
MrComputer Posted June 18, 2016 Author Share Posted June 18, 2016 Here is my efi clover folder CLOVER.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted June 18, 2016 Moderators Share Posted June 18, 2016 DPCIManager https://sourceforge.net/projects/dpcimanager/ IOReg IORegistryExplorer_v2.1.zip Get screenshots with DPCIManager of PCI list Launch IORegistryExplorer and save the file and attach it here. Also while booted to Clover GUI, hit F4 or shift F4. Then compress and attach /EFI/Clover/ACPI/Origin here too. Link to comment Share on other sites More sharing options...
MrComputer Posted June 18, 2016 Author Share Posted June 18, 2016 i think i might have sent the wrong files earlier. this is what i have. Becky’s MacBook Pro.zip Link to comment Share on other sites More sharing options...
MrComputer Posted June 18, 2016 Author Share Posted June 18, 2016 I usedHVientnam to get the partition to show. here is the origin fileorigin.zip I'm not sure if this is correct Link to comment Share on other sites More sharing options...
Administrators Hervé Posted June 18, 2016 Administrators Share Posted June 18, 2016 You got full graphics acceleration, right? You should get SD card reader working with VoodooSDHC kext. I would also expect LAN to work with the BCM57xx kext or the faking kext from Mieze. Link to comment Share on other sites More sharing options...
MrComputer Posted June 19, 2016 Author Share Posted June 19, 2016 Im assuming I do have full gfx acceleration, i'm not seeing any latency and no visual errors. I will try the faking kext. Any suggestions for audio? Also trackpad and keyboard work ok. Alt key acts as CMD key; windows key acts as alt key; and trackpad is very sensitive/jittery when moving it slightly. None of the keyboard/trackpad issues are a big deal, but bluetooth keeps nagging me about finding wireless inputs. Figured out how to dismiss all the nagging stuff. Literally all i'm stuck on is the audio. OH, and now my battery readout is missing again. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted June 19, 2016 Moderators Share Posted June 19, 2016 Replace the Config file in /EFI/Clover Replace the Patched folder in /EFI/Clover/ACPI Replace the Other folder in /EFI/Clover/Kexts Copy the kexts in Other/LE to /Library/Extensions Run these commands in terminal and reboot sudo chmod -Rf 755 /L*/E* sudo chown -Rf 0:0 /L*/E* sudo touch -f /L*/E* sudo chmod -Rf 755 /S*/L*/E* sudo chown -Rf 0:0 /S*/L*/E* sudo touch -f /S*/L*/E* sudo kextcache -Boot -U / Should fix the following: Audio SD Card reader Battery status Wireless Bluetooth MyComputer.zip Link to comment Share on other sites More sharing options...
MrComputer Posted June 19, 2016 Author Share Posted June 19, 2016 Awesome! Everything is working now but the battery readout. I get battery when install fake SMC but then i lose my integrated keyboard and trackpad support. Any ideas for battery? Link to comment Share on other sites More sharing options...
MrComputer Posted June 19, 2016 Author Share Posted June 19, 2016 This is my EFI on my SSD. After installing reinstalling OS X and installing Hackintosh vietnam I added bluetooth support, wifi support, trim support. I have working keyboard, trackpad, SD reader, battery readout, just no sound CLOVER.zip Link to comment Share on other sites More sharing options...
Recommended Posts