kaspar Posted September 21, 2016 Share Posted September 21, 2016 hello. i decided to upgrade my system and I used Jake Lo's guide: https://osxlatitude.com/index.php?/topic/8506-dell-latitude-inspiron-precision-el-capitan-clover-guide/&do=findComment&comment=54632allmost everything works fine when using USB for boot, but when I try to boot from disk, i loose USB-ports. So what is wrong? this is first time using Clover so it's quite confusing how to set up the machine, installer and where to install and copy things. f.e. any help is appreciatedstupid questions will follow, maybe some other newbie as me have same questions... so here we go: 1 How do i have to set up the settings etc to get everything work from HDD? for Latitude E6420 Nvs4200M i used Legacy options - (in the guite: For Exx20 (SandyBridge models), use Legacy - GUID Scheme. Not UEFI)do I have to make USB installer using Legacy or UEFI Boot Sequence in BIOS? or it does not make a difference? When installing Clover (version Clover_v2.3k_r3320) into the USB installer I used only: Install Clover in the ESP Bootloader/Install boot0af in MBR CloverEFI/CloverEFI 64-bits SATA Preference panel is it right? or i need to install RC scripts also?weird, when booting it shows newer version of Clover than 3320. ??? 2. I Used Generic EFI folder (EFI.zip) + E6x20 NVS.zip (downloaded from the same page). It took a while figuring out where to put file in E6x20 NVS.zip. At last i checked original EFI folder before replacing EFI folder for new one - it helped to figure out things a little bit. Still questions: where do i have to put the kexts in folder Other. Leave them as they are (Other folder) or make a 10.11 folder in the USB stick’s EFI partition? /Volumes/EFI/EFI/CLOVER/kexts/Others ? or /Volumes/EFI/EFI/CLOVER/kexts/10.11 ? 3. When installing El Capitan into the harddrive same questions raised: ido i have to install sing Legacy or UEFI Boot Sequence in BIOS? or it does not make a difference? installing Clover into the hard drive i used only: Install Clover in the ESP Bootloader/Install boot0af in MBR CloverEFI/CloverEFI 64-bits SATA Preference panel is it right? or i need to install RC scripts option also? 4. When generating ssdt.aml with ssdtPRGen.sh where do i have copy the ssdt.dsl ? 5. In /Volumes/EFI/EFI/CLOVER/ACPI/patched is dsdt.aml file. how do i generate a new one? or it’s not a must do thing?6. Where do i have to put config.plist? I modified the one which is on EFI partition (in CLOVER folder). 7. when copying kexts to hard drive: where do i have to put the kexts in folder Other. Leave them as they are (Other folder) or make a 10.11 folder in the USB stick’s EFI partition? P.S. it seems that one of the generators needs internet connection to work properly! 8. When using EFI Mounter app do i have to unmount the volumes before proceeding? anyway, thank you Jake Lo and others for the great installer guides and tips! any help is appreciated. _____ Intel Core i5 2520M (integrated Intel HD Graphics 3000) 8 Gb RAM NVIDIA NVS 4200M HiRes 1600x900 LCD WIFI - Qualcomm Atheros AR3011 (not working yet, using WIFI stick) bios A22I think it is Sandy bridge version. Optimus is disabled in BIOS. Link to comment Share on other sites More sharing options...
kaspar Posted September 21, 2016 Author Share Posted September 21, 2016 should i upload my HDD's EFI folder here ? eeeeee, how? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted September 21, 2016 Moderators Share Posted September 21, 2016 1) Legacy is correct. No need for preference pane and rc script on USB Installer, only on the Installed drive The guide never mentioned about renaming, so stick with Other Files are newer than v3320 because you replaced them with v3556 from my EFI folder or you installed newer version of Clover 2) Kexts in Other can remain there, no need to move or rename anything. Guide never mentioned about renaming...so stick with the guide 3) Guide said to see Note1 for SandyBridge which you have and use Legacy Mode..UEFI doesn't work for me and causes hang Install Preference Pane and RC Script to installed drive 4) In guide, it states Place generated SSDT.aml in /EFI/Clover/ACPI/Patched 5) No need, just use the DSDT as is. Patched by Wern to make nvs4200m sleep capable. 6) Keep Config.plist where it is /EFI/Clover 7) Keeps the kext in Other as they are, only place kexts in Other/LE to /Library/Extension as stated in the guide 8) No need to unmount, it'll unmount after you reboot or shutdown Link to comment Share on other sites More sharing options...
sunilo Posted November 10, 2016 Share Posted November 10, 2016 Hi OSX-Latitude Team, Now I have tried following steps for El Capitan Install. I used procedure give by Jake Lo "Dell Latitude/Inspiron/Precision - El Capitan Clover Guide" Used the latest clover ver r3911 , then replaced the file in EFI folder in EFI partition with Generic EFI from EFI.zip. Replaced (ACPI , Kexts and config.plist) copied from 6420.zip file. in clover boot up menu under options used -v nv_disable=1. USB starts booting and after slow boot and lots of text lines it stops at " waiting for DSMOS..." Please help me , what do I need to do to proceed further. Thanks Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 10, 2016 Moderators Share Posted November 10, 2016 You need to use the NVS bootpack. The current one you are using is for HD 3000 only. Link to comment Share on other sites More sharing options...
kckustomac Posted February 17, 2017 Share Posted February 17, 2017 You need to use the NVS bootpack. The current one you are using is for HD 3000 only. Why doesnt the dsdt.aml file open in maciasl? Link to comment Share on other sites More sharing options...
Administrators Hervé Posted February 17, 2017 Administrators Share Posted February 17, 2017 Maybe because it was compiled with another tool such as DSDTEditor or the file is corrupt. Link to comment Share on other sites More sharing options...
Recommended Posts