Dell mobile Precision 7510 Intel hd530, black screen

[ss2sameer]

Hi

 

Yes QE/CI is working with M1000M.

 

brightness control doesn't work with M1000M. works with intel HD530.

 

with M1000M internal display is connected through display port , so i guess brightness control won't work unless the connected panel is registered as backlight display.

 

NVIDIA Quadro M1000M:

 

  Chipset Model: NVIDIA Quadro M1000M

  Type: GPU

  Bus: PCIe

  PCIe Lane Width: x16

  VRAM (Total): 2047 MB

  Vendor: NVIDIA (0x10de)

  Device ID: 0x13b1

  Revision ID: 0x00a2

  ROM Revision: VBIOS 82.07.8f.00.1a

  Displays:

Display:

  Resolution: 1920 x 1080 @ 60 Hz

  Pixel Depth: 30-Bit Color (ARGB2101010)

  Main Display: Yes

  Mirror: Off

  Online: Yes

  Rotation: Supported

  Connection Type: DisplayPort

[Jake Lo]

Can you share your files?

I got a Precision 7510 with M2000M but couldn't get QE/CI on it. 

[ss2sameer]

hi

here is my Config.plist

 

here are the things i did to get my NVIDIA M1000M working

 

1. Install latest Webdriver for the os i.e. el captain 10.11.6

2. run agdp fix app (black screen) without it

3. install IntelBacklight.kext in clover (black screen without it) don't know the logic behind these

4. at times my OS X boots into black screen.close the lid and reopen to get the login screen. sometimes this step is not required. and if it works, it will work for a few days and revert to this stage. no clue how to solve this tried a lot of combinations.

config.plist.zip

[lamcrkh516]

can you share what the guide you install MacOS into 7510 ?

some link or some hind, and it's Capitan or Sierra ?

thank you so much

[Jake Lo]

Used my Clover guide here but no bootpack until I have a working setup.

So far I could get both Intel 530 or M2000m to boot. I have full QE/CI with HD 530 but not M2000m.

Still can't figure out the BIOS reset issue with the Switchable Graphics disabling everytime after booting to HD530.

Audio working with patched AppleHDA_ALC293.

Are you using patched DSDT/SSDT?

[ss2sameer]

No I am unable to use patched DSDT/SSDT successfully till now. always run into errors

 

So its without any patched DSDTt/SSDT, quite happy with the ways things are. 

[Jake Lo]

Can you reupload the file, can't seem to be able to download. getting some permission issue.

[ss2sameer]

here is the file again

config.plist.zip

[ss2sameer]

Can u explain the steps to use AppleHDA_ALC293

​I tried but couldn't get any audio.

still using voodoo 

[Jake Lo]

Sure, add these to KextToPatch and install this to /Library/Extensions. Set layout-id to 1. Repair permission and rebuild cache. You'll need the vanilla AppleHDA in /S/L/E, remove voodooHDA and AppleHDADisabler

<dict>
<key>Comment</key>
<string>AppleHDA ALC 293 #1</string>
<key>Disabled</key>
<false/>
<key>Find</key>
<data>
hBnUEQ==
</data>
<key>Name</key>
<string>AppleHDA</string>
<key>Replace</key>
<data>
kwLsEA==
</data>
</dict>
<dict>
<key>Comment</key>
<string>AppleHDA ALC 293 #2</string>
<key>Disabled</key>
<false/>
<key>Find</key>
<data>
hAjsEA==
</data>
<key>Name</key>
<string>AppleHDA</string>
<key>Replace</key>
<data>
AAAAAA==
</data>
</dict>
<dict>
<key>Comment</key>
<string>AppleHDA ALC 293 #3</string>
<key>Disabled</key>
<false/>
<key>Find</key>
<data>
hQjsEA==
</data>
<key>Name</key>
<string>AppleHDA</string>
<key>Replace</key>
<data>
AAAAAA==
</data>
</dict>