richw

I had the same issue. Check your drive to see what partitions exist on your drive with GParted. I have a M2 SSD and Sata SSD in my E7440, the Dell recovery partition was the cause

No luck with layout #3. I replaced the VoodooPS2 kext with a VoodooPs2 R6B10fixed kext which fixed the touchpad issue. Jake Lo, in the lower right of the diagnostics screen above the exit button is an option to perform a quick audio test. I almost missed it myself. Also ran a live version of Linux Mint to test the speakers.

no luck with CodecCommander in /L/E Debug attached. debug_21362.zip

I reinstalled Sierra, upgraded to High Sierra no apfs conversion using MBP 8,2. Usb is working, Audio is only available through headphones and touchpad does not work. I have not copied any files to /L/E. Only the AppleALC in kext folder.

Thank you, If I wanted to keep it at High Sierra 10.13 are there any changes I need to make?

Thanks for the feedback. Changing the SMBIOS resulted in a halt (circle with line through it) Sticking to High Sierra seems the best choice for this laptop.

Debug is attached debug_20778.zip

Dell E6320 Bios:A20 CPU: I5-2540M 2.6Ghz Audio: IDT 92HD90 Wifi:Dell DW1510 I have successfully installed a Sierra, upgrade to High Sierra to Mojave 10.14.3 with a few issues. 1- Sound works through the Headphone Jack, no sound through speakers. I performed the Dell Diagnostics to verify hardware is working. 2- Keyboard and mouse not working on Clover boot screen. I am able to bypass with a defined partition and countdown, but it would be nice to have 3- USB Ports not working Any Help is greatly appreciated.

Thanks as always Jake those adjustments fixed it.. I have a question about a E7440 static in sound but I will post it in the correct Forum

debug_31555.zip Here is the generated debug. Sorry for the delay.

Hello Jake, i completed the upgrade from High Sierra to Mojave and had a few questions. Do I need to remove the kexts that were copied to /L/E in High Sierra? Sound is not working, no device found. I tried updating AppleALC and disabling the AppleHDA kexts to patch in Clover. Any insight is appreciated.

Thanks for the help Jake, I was able to pinpoint the issue. I had to boot os with injected kexts. FYI - I adjusted the Inject Kexts to yes using Clover Configurator in the System Parameters setting

followed instructions, cleared cache, copied files. executed commands, now receiving expected messages. reboot, still no luck

no. mymac$ sudo chmod -Rf 755 /L*/E* Password: mymac$ sudo chown -Rf 0:0 /L*/E* mymac$ sudo touch -f /L*/E* mymac$ sudo chmod -Rf 755 /S*/L*/E* mymac$ sudo chown -Rf 0:0 /S*/L*/E* mymac$ sudo touch -f /S*/L*/E* mymac$ sudo kextcache -Boot -U / mymac$

each command completed successful. no errors. the only prompt was for the sudo password