Jake Lo
-
Posts
14365 -
Joined
-
Last visited
-
Days Won
871
Content Type
Profiles
Articles, News and Tips
Forums
Posts posted by Jake Lo
-
-
You can bake and revive that faulty board in the oven if you know what you're doing.
-
go to preferences/network. Select the + at the bottom left, interface name, select Wi-Fi from the drop down, then click create.
-
Download lspci byEvOSX86 and install it.
Some system only works on MBR like some lenovo. Create installer with myHack and google for an MBR patch, that should get you going.
-
1
-
-
Modified AppleHDA (Ver. 265.88) from OS X Yosemite Beta.
Anybody who can tried it out, and give me a feedback if it works. thanks.
Not loading for me - E6420. Using Chameleon v2380.
-
Try GenericUSBXHCI for USB 3.0 and VoodooHDA+AppleHDADisabler for Audio.
-
See this. Most guides are for Desktop HD 4600 not laptop HD4600. Not sure if it'll work on a Dell as I have not tested it.
-
So the SSDT got all your USB ports working now?
For port replicator to work, you might need your DSDT patched. I'm no expert when it comes to patching DSDT.
There might be some issue with HDMI and HDMI audio for HD 4600 mobile on 10.9.4 and no solution as far as I know for now.
-
See this thread. #51 and #52. Seems his E6320 webcam is not working either.
-
Here you go. i7-4610M SSDT
-
Realz, Clover automatically patch the kernel. With Chameleon, you'll need to manually patch and add it. My boot pack has patched kernel for 10.9.0.
Make sure you replaced it as ktbos did a few posts back for 10.9.4
-
Those must be USB 3.0 ports. GenericUSBXHCI.kext should work. Check kextstat to see if it's loaded.
It might require a patched DSDT to work.
Looks like i7-4610M is not in the script. I'll try to generate one for you
-
try booting with IntelAzulFB=10 -v
if still failed to load graphics, you'll have to try all value from 0 - 15 until you get one that loads perfectly
-
see guide and boot pack here
-
Get latest patched AppleHDA here, need to add HDAEnabler=Yes in boot.plist too.
-
Make sure you set the BIOS to the default first, apply and then set SATA Operations to AHCI. Also try adding USBBusFix=Yes during boot.
-
I believe that boot pack is for 10.9.2, so the patched kernel won't work for 10.9.4. Get it here on the bottom of the guide.
Also you can't use the SSDT for your CPU. After building your system, use HVT to generate the SSDT for you CPU, under tools->SSDT Generator.
The gpu for your unit is HD4600 not HD4400, so if you don't get graphics right, use Chameleon Wizard, change the FB value to 10 instead of 12. Also you can add dart=0 to the boot.plist.
-
You have to take into account what version of Mavericks you're installing as the patched kernel is different and what version the boot pack has.Your attachment didn't get added, please link to it if you download it from there.
-
You could use HVT, under tools, select SSDT Generator. It uses PikerAlpha's script to automatically generate one for you and place in /Extra
-
That could be due to your display resolution. What's your screen max resolution?
-
Try boot pack from this thread.
You'll need to replace the SSDT for your processor -
Yes, Lenovo systems requires Memory Protection turned on.
-
Try new patched by Mirone here.
-
Recently got a hold of an Optiplex 990. Saw a few threads here regarding this model but no guide or bootpack in any of them, so I decided to write one up. An easy build as mentioned by Dan Marshall, runs really smooth.
It comes with an AMD HD5450, didn't try the built-in Intel HD2000.
Credits:
Conti - for myHack
Slice - latest VoodooHDA 2.8.6
Dr. Hurt from Insanelymac - patch DSDT for HD5450M
Specs:
i5 - 2400 3.1GHz | 8GB ram | HD2000/AMD HD 5450M | 128GB SSD | Mountion Lion 10.8.5 | Mavericks 10.9.4 | BIOS A18
- Build USB Installer with myHack
- Download and Extract bootpackExtra.zip
- Relaunch myHack, select Install Extra, select USB Installer as target drive. Select "Use my Own" and browse to Extra above
- Boot with USB Installer ( Make sure to plug monitor to DVI, vga is not supported)
- Format disk to GUID and Extended Journal and start the build
- When prompt, select "Use My Own" and point to Extra on USB Installer
- When prompt to remove problematic kexts, select Yes, Yes, No
- Wait a few minutes, system will automatically reboot, remove the USB Installer
- Complete the installation
- Done.
Working:
- AMD HD 5450 Full QE/CI
- Dual Display
- Sleep/Shutdown/Restart
- LAN
- Audio using VoodooHDA 2.8.6
Note: Make sure to set SATA Operation to AHCI. For best result, set it to the Default, apply and then set SATA Operation to AHCI.
/!\ For Mountain Lion install, remove AppleKextExcludeList.kext from bootpack
/!\ For Yosemite Install, see guide here and boot pack posted here
-
1
- Build USB Installer with myHack
-
You'll need a patched kernel for your haswell processor. Read more about it here.
Dell Latitude 6430u with i7-3667U & HD 4000 (Mavericks)
in The Archive
Posted
6430u with Intel HD 4000
Credits:
Special thanks to myHack (conti)
Zenith432 for GenericUSBXHCI - USB 3.0
qwerty12 for DisableIntelTurboBoost for Power Management
EMlyDinEsH for patching original AppleHDA
Specs:
Working:
Let's get started...
I use the myhack method for this build, so follow instructions to build your USB installer, set BIOS settings and run the OSX Installation from here http://myhack.sojugarden.com/guide/
Enable Clicking for Trackpad
Allow apps downloaded from: Anywhere for Security & Privacy
Launch myHack, Install Chameleon to fix the "Invalid Partition Table" error
Don't update BIOS to version A07 or A08, causes major screen artifacts!Fixes:
in System/Library/Frameworks. Don't forget to backup the original file.
JL