Jake Lo
-
Posts
14365 -
Joined
-
Last visited
-
Days Won
871
Content Type
Profiles
Articles, News and Tips
Forums
Posts posted by Jake Lo
-
-
-
can you post current Config file and IOReg file?
-
Your SMBIOS name is truncated. Let's fix that and see if that will resolve the touchpad too
In Config, change these 2 values
CustomSMBIOSGuid -> true
UpdateSMBIOSMode -> Custom -
Looks like you have dual graphics card, you need to disable the non supported device
-
Add sinetek-rtsx if you have Realtek RTS525a (10ec:525a)
Can you post IOReg file with the updates?
-
You must be big fan of The Fresh Prince of Bel-Air
I just uploaded new files that'll run on Big Sur as well.
No issue upgrading Catalina to 10.15.6
-
1
-
-
Updated OC files, tested on Big Sur Beta2, Catalina, Mojave with DW1550
-
2
-
-
-
Did you add SSDT-TPDX.aml to your Config?
Make sure to have latest VirtualSMC + SMCBatteryManager, Lilu , whatevergreen.
Touchpad preference won't appear unless battery status is working
-
Same error as above?
What happens if you restore your Config file?
-
try this config
-
1
-
-
You need to select Reset NVRam at OC Picker after any file changes.
-
Here's the files I use, no issue with sleep / wake
Disable the DW1820a in the Config if you have other wifi devices
-
1
-
1
-
-
You incorrectly added the injection for graphics. Try this config. Fixed injection and added the patch Hervé mentioned
-
1
-
-
At OC boot screen, select Reset NVRam and then try again. If you don't see the option, the press spacebar to review the option
-
1
-
-
No, you know DP is already working. Have you tried only HDMI ?
-
Do you have a 1080p monitor for HDMI and see if it works?
The IOReg above, is that with both DP and HDMI connected?
-
-
I have no experience with itlwm and HeliPort.app
-
run this 1st
-
The problem with the ApplePS2Controller is that it's outdated. Your can try replacing it with this for Alps
-
Yes, just update Clover v5119 and kexts mainly Lilu, Whatevergreen and AppleALC and you should be good to go.
You can replace the files with v5118 if you like from here
-
The Config I'd attach already have layout-id changed to 11. The reason it wasn't working before as I had said above was that you need to select Reset NVRam after each change /update. That's why the IOREg you attached after replacing the Config and adding the SSDT-HPET did not reflect. Anyway, glad it's working now.
The HDMI port issue, what is the resolution of the display?
If it's 4k, you might have to increase the DVMT pre-alloc.
-
Can you post new IOReg just so I could confirm it got updated?
-
1
-
Lenovo Thinkpad P1: is Mojave or Catalina possible?
in The Archive
Posted
Install Clover to the installed drive. Mount the EFI partition. Replace all the Clover files from the USB installer.
For Bluetooth, add the following kexts to kexts/Other
For HDMI, connect the HDMI model, run this app. Save, compress and attach it for review
BT-Fix.zip