Leon

Hi, As we know that some of you might have an unsupported WiFi and Bluetooth Combo in your notebooks and the only way to get the WiFi and Bluetooth working is by replacing it with a supported card. Here, we are going to present you the perfect WiFi and Bluetooth Combo which works very well in OSX. There are two three models which works: 1. Atheros AR5B195 (Specifications) AR9285 WiFi b/g/n (1x) AR3011 Bluetooth 3.0 2. Atheros AR5B197 (Specifications) AR9287 WiFi b/g/n (2x) AR3011 Bluetooth 3.0 3. Broadcom BCM94352HMB (Specifications) BCM4352 WiFi a/b/g/n/ac (2x) BCM20702A1 Bluetooth 4.0 Research post: Link Known issues in Bluetooth: Atheros AR3011 has some stability issues with Magic mouse WiFi: In order to get the WiFi working we need either DSDT (or) kext patch. Add the below DSDT method to the your WiFi device in DSDT (or) use the attached patch files/manual patch method to patch the WiFi Kext in SLE. Patching DSDT: Needed: DSDT Editor IORegistryExploere For this, you need to find where the wifi card is detected by Mac OSX which can be done by going through the ioregfile. First, look at the section "IOService:/AppleACPIPlatformExpert/PCI0@0" in ioregfile and find the device starting with the name "RPXX". Next, find your WiFi card by looking at the name "AirPort_xxx" (if you have patched kext installed) (or) look at the device ids from the RPXX section. After locating the device "RPXX", add the below method to that Device in your DSDT and install it. Note:This is located mostly at one of those Devices of the DSDT: RP01/RP02/RP03/RP04/RP05/RP06/RP07/RP08 (some notebooks might have this name differently, so find and confirm it from ioregfile using the above steps). Atheros AR5B195 and AR5B197 WiFi DSDT Patch: Method (_DSM, 4, NotSerialized) { Store (Package (0x0C) { "AAPL,slot-name", Buffer (0x05) { "PCIe" }, "name", "pci168c,2a", "device-id", Unicode ("*"), "IOName", "pci168c,2a", "device_type", Buffer (0x11) { "Wi-Fi Controller" }, "model", Buffer (0x34) { "Atheros AR9285 802.11b/g/n Wireless Network Adapter" } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } Broadcom BCM94352HMB WiFi dsdt patch: Method (_DSM, 4, NotSerialized) { Store (Package (0x0C) { "AAPL,slot-name", Buffer (0x05) { "PCIe" }, "name", Buffer (0x0D) { "pci14e4,43a0" }, "device-id", Buffer (0x04) { 0xA0, 0x43, 0x00, 0x00 }, "IOName", "pci14e4,43a0", "device_type", Buffer (0x11) { "Wi-Fi Controller" }, "model", Buffer (0x33) { "Broadcom BCM4352 802.11ac Wireless Network Adapter" } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } Patching Kext: For this, we need to inject our card's ids to the Apple WiFi Kext. You can use the attached script to patch (or) can manually patch using the below steps. Manual patch: For Atheros AR5B195 and AR5B197, we need to patch the kext "AirPortAtheros40.kext" located at System/Library/Extensions/IO80211Family.kext/Contents/Plugins/". For Broadcom BCM94352HMB, we need to patch the kext "AirPortBrcm4360.kext" located at System/Library/Extensions/IO80211Family.kext/Contents/Plugins/". Copy the kext to Desktop and Open the file "Info.plist" using text editor located inside the kext we are patching and add the bolded line below to the section "IOKitPersonalities->IONameMatch" as shown below. Atheros WiFi: IONameMatch pci168c,30 pci168c,2a pci168c,2b pci168c,2e pci106b,0086 pci168c,1c pci168c,23 pci168c,24 Broadcom WiFi: IONameMatch pci14e4,43b1 pci14e4,43a0 After editing, save the file. BCM4352 5Ghz Fix: You can use the attached BCM4352 WiFi 5Ghz Patch script to patch (or) use the manual patch explained below. If you use script then you need to fix permissions and caches after running the script.(Optional) 1. Download the app hexfiend 2. Copy the kext "IO80211Family.kext" from System/Library/Extensions to Desktop 3. Copy the file "AirPortBrcm4360" from "IO80211Family.kext/Contents/PlugIns/AirPortBrcm4360.kext/Contents/MacOS/" to working folder 4. Open the "AirPortBrcm4360" in hexfiend app 5. Press Command + F to search 6. Enter the following hex codes in Find and replace box Credits goes to SKVO (applelife.ru) Link to his post for this Country code fix discovery. Changing the Country code from XT to US: Find box 01 58 54 00 Replace box 01 55 53 00 Credits goes to EMlyDinesH for the below patches and scripts. Making the card to be detected as Apple card: Patch 1: Find box 30 6B 10 00 00 75 Replace box 30 6B 10 00 00 74 Patch 2: Find box 6B 10 00 00 0F 85 Replace box 6B 10 00 00 0F 84 7. Click on Replace All button to replace. 8. Install the kext. Bluetooth: For bluetooth, you need to use the kext from here: Bluetooth Kext Hope this helps. Let us know if you have any doubts. Update: Updated the BCM4352 WiFi patch script with additional patch for the card to be detected as Apple. Patch Atheros WiFi Kext.zip Patch Broadcom WiFi kext.zip BCM4352 WiFi 5Ghz Patch.zip BCM4352 WiFi 5Ghz Patch (updated).zip

All have been commited to SVN - thank you for you help and support!!

awesome work.. i will update EDP asap.

Dont use a flavour.. look in the menus .. there is guides.. right here.. that will give you vanilla installation.. your machine is one of the best supported for SL and Lion

Today we have started to research installing OSX On a Acer Travelmate 3010 / 3012WMTi Credits: JaavrOS (Jason) & Leon Current status: Running Snow Leopard 10.6.7 Issues: No battery indicator Unable to Install Lion, 32bit CPU - might have to play around with legacy kernels Needs nullcpu not to KP durring boot Sleep does not work Internal wifi does not work because it have to be "trickered" via the frontpanel button Firewire is detected, but dosent work Lan dosent work Audio works, but not microphone Webcam is deteced but does not work LSPCI: 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02) 00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 02) 00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02) 02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) 03:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5789 Gigabit Ethernet PCI Express (rev 11) 0a:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 0a:09.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller 0a:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) Le'story: We were able to use the default method with myhack and the newly created bootpack, the synaptics trackpad worked OOB Notes:

Specifications: Processor [X4C] : Intel® Core™ i5-3337U Processor (3M Cache, up to 2.70 GHz) Processor [X3C] : Intel® Core™ i7-3517U Processor (3M Cache, up to 3.00 GHz) Graphics Processor(GPU) : Intel® HD Graphics 4000 Chipset : Intel® HM75 Express Chipset Hard disk : Samsung 128GB SSD RAM : 4GB DDR3 1600MHZ (X3C) / 8GB DDR3 1600MHZ (X4C) Wifi : Intel Centrino Advanced-N 6235 WiFi Adapter Bluetooth : Intel Centrino Advanced-N 6235 Integrated Bluetooth 4.0 Ethernet : Realtek RTL8168/8111 PCI-E Gigabit Ethernet Adapter Audio : Realtek® High Definition Audio ALC269VC USB 3.0 : Renesas uPD720202 USB 3.0 Host Controller Touchpad : Elan Touchpad v4 Hardware Webcam : Webcam SC-13HDL11624N 1.3MP Card reader : Realtek USB2.0 card reader Monitor : 13.3 LED HD+ 1600x900 Optical Drive : None Battery : 4Cells 54 Whrs (X3C) / 8Cells 62 Whrs(X4C) Interface : 1 x Microphone/Headphone combo jack 1 x VGA Mini 1 x USB 2.0 port(s) 1 x USB 3.0 port(s) 1 x RJ45 LAN Jack for LAN insert 1 x HDMI Working: Graphics with QE/CI on Intel HD4000 GPU Audio with AppleHDA Bluetooth Ethernet USB2.0 and USB3.0 HDMI (With Audio) Webcam Battery Elan Touchpad with multi touch Sleep, Processor P&C-States with Native power management Not working: Intel Centrino Advanced-N 6235 WiFi Realtek USB2.0 card reader LID Sleep Unknown: VGA Issues: Plug-in the network cable on boot - then it will work. For Installation: Follow the Steps in the link below, starting with Pre installation, Installation and Post Installation: http://www.osxlatitude.com/edp/documentation/pre-installation/ I will from time to time delete all comments and merge all good info into the main post - this is to make sure newcomers dont have to read for hours before finding what they need. Credits: Bronxteck, iMick, Dinesh & Leon Current status: Running ML 10.8.x and Mavericks perfectly, bootpack is on site and well supported with Latest EDP Fixes: AUDIO: To get Audio working correctly you need to install VoodooHDA Pref. pane and adjust "Speaker analog" iMix to around 30% and under Microphone digital "Noise reduction" to 80% and finally "Monitor" to 25-20%. Finally you should use VoodooHDA Settings loader on each boot to load settings SCREEN BRIGHTNESS: To get full brightness after boot you need to sleep the display - I use the "sleepdisplay" app that comes with EDP in combination with a hotkey: https://osxlatitude.com/index.php?/topic/2109-osx-bash-script-execution-through-keyboard-shortcut/ LAN ADAPTER: Plug-in the network cable on boot - then it will work. WIFI/BT: Have to be replaced - SOLUTION: https://osxlatitude.com/index.php?/topic/1916-the-perfect-mini-pcie-combo-card/ Reset NVram to get native power management and key backlit work Boot into chameleon Unplug the power adapter Use a small pen to press the reset key on the underside of the machine, keep it press until it turn off Plug in the power cord and start it Attached usefull files: Samsung 900x3c Bios update P05ACC: ITEM_20121126_861_WIN_P05AAC.exe.zip

Dude!!.. wtf.. how hard it is ? 1. Install OSX using the guides 2. Boot via your usb pen 3. Download this: http://www.osxlatitude.com/edp/download/ 4. Follow the instructions Done. If you spend more time on reading the guides that is less than 10cm away from your mouse cursor and spend less time complaining about people who do this out of kindness then maybe you would have been done by now - and if that isent good enough for you - then go buy a mac for f*** sake.

Awesome work.. we will get it tested and submited to EDP .. would you mind patching the one for D4x0 and D520 also ? Its also a GMA950

get a ssd .. well worth it...

well.. its no news that VoodooHDA can cause KP.. sadly.. piece of shit ... voodoohda = the best of the worst

If it wasent loaded you wouldent be able to boot.. check this out... air:~ lsb$ kextstat | grep AppleACPI 11 2 0xffffff7f81d26000 0x57000 0x57000 com.apple.driver.AppleACPIPlatform (1.6) 24 0 0xffffff7f81d83000 0x7000 0x7000 com.apple.driver.AppleACPIEC (1.6) 28 0 0xffffff7f81d8d000 0x4000 0x4000 com.apple.driver.AppleACPIButtons (1.6)

Herve, update to latest EDP (if you are still running 3.x then re-download 4.x) and do a new build..

np mate Stick aorund...

Hi, You got the myfix part correctly EDP copies all its kexts to /e/e, if AppleACPIfix is enabled in modeldb.inc.php for that specific model, it will remove the existing AppleACPIplatform.kext from sle, copy in a new one and copy it to ee also. sounds more like your issues was permissions to begin with..

Hey, Can you drop a lspci overview + your /Extra folder so we can see what you got, also, what version of chameleon are you using ?

yep.. do that and report back..

.. and the 4th. reboot ?

Sleep: Could very well be.. wouldent be the first time apple have f*cked up AppleACPIPlatform.kext: Yes, you should ALLWAYS do a new build after update anyway - and yes.. there is a that risk. However, i just did an update where we copy AppleACPIPlatform.kext to /e/e like we did before also.. seeing that its the same kext it should work without cache issues. Mind updating edp and testing doing a new build ?

Hi, Thanx for testing - good that we got one thing resolved Audio = VoodooHDA is buggy.. i think you can get a seperate pref. pane for voodooHDA Sleep = Sleep have allways been buggy as hell :-/

I use the build-in daily, works like a charm.. if you are looking for a OpenVPN client, then check this one out : https://secure.sparklabs.com/viscosity/

Hey mate, I'v added a fix to EDP so that it will replace AppleACPIPlatform.kext in sle instead of trusting on version bumping, that should resolve your problem permanent.. would you mind updating your EDP (using option 5 in edptool) and do a new build to see if it works ?

Snow is great.. no doubt there.. but Lion is better.. also a bit slower.. atleast on the D430, but seeing that you are on the D630 then you shouldent notice it. If you one day upgrade your board to a Nvidia board, then you can even run Mountain Lion

You can allways go back to applehda from voodoohda.. its harder the other way around Happy to help mate.

Thunder, try and make a new usb pen using myhack + bootpack... guides here: http://www.osxlatitude.com/edp/

Can you navigate to /s/l/e/myhack.kext/contents/plugins and copy/paste what you have in there.. Also, remove your AppleACPIPlatform.kext in /s/l/e