Leon

You need the high resolution DSDT for your model.. there should be one on the forum somewhere...

Bug found, bug fixed. Download a new bootpack and try again

did you use a bootpack from the sites ? http://www.osxlatitude.com/edp/bootpack/

Hi, EDP is for your harddisk.. not for your usb pen.. use a bootpack for your USB pen

Hey, I have seen the same issue that OSX and linux have been able to detect battery issues before bios did it.. i re-tested the battery in windows with a tool i found on download.com - and was able to confirm that the battery infact had issues.. also seen the issue with brand new aftermarked batterys.

Hi, Yes, EDP3 does not use 0edp.kext.. that is version 2.x that uses that - version 3.x uses myhack.kext .. so make sure that you are using the right one.

Hi, I recently upgraded my Dell D430 to run OSX Lion - and with that i noticed that coolbook no longer is working. The problem lies within AppleACPIPlatform.kext in Lion and the solution is to replace it with the one from Snow Leopard 10.6.7 Howto fix it: 1. Download kexthelper 2. Download AppleACPIPlatform.kext from 10.6.7 3. Extract both to desktop 4. Use kexthelper to install AppleACPIPlatform.kext 5. Reboot 6. Reinstall coolbook Enjoy! Ps. This fix is also a permanent part of EDP because it also fixes alot of other issues

You just had a voodooHDA crash.. happends more and more.. piece of *beep*

Dident have time for it, since i dident have it long enough. However, we agreed yesterday that all new machines will get a review on the blog. However, you are welcome to write one

need a bit more info ? .. * Are you running latest Bios ? * What version of osx are you on ? * What version of chameleon and EDP + Describe the problem.. etc.

what OS are you running ? (SL or Lion) .. i know it works under SL.. but not sure with Lion

with magic pad.. yes..

The D430 does not have multi touch support (its a hardware requirement) .. the best PS2 is option 2 in EDP because it gives you side and bottom scroll. However, if you want to play with multi touch, then i suggest you get an apple magicpad

mick isent dont, but this is a good start: http://www.osxlatitude.com/edp2/bootpack/

its supported now

have any if you tested the latest EDP3 ?

Use EDP 3.x instead.. its on the forum

We are running some tests on EDP 3 right now.. we have a few tricks up our sleves..

Actually.. just test with newest myhack and replace the bootpack ( /Extra ) folder the usb with the right one from here: http://www.osxlatitude.com/packs/?dir=Dell/Latitude

Either install Lion.. or wait a few days.. we are adding SL support to EDP 3.1

Will be updated over time: //// LSCPI 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 01:00.0 VGA compatible controller: nVidia Corporation G71 [GeForce Go 7900 GS] (rev a1) 03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 03:01.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 0a) 03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 05) 03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff) 0c:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61) ubuntu@ubuntu:~$ lspci >lspci.txt ubuntu@ubuntu:~$ tail lspci.txt 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 01:00.0 VGA compatible controller: nVidia Corporation G71 [GeForce Go 7900 GS] (rev a1) 03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 03:01.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 0a) 03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 05) 03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff) 0c:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)

Never tested, feel free to try

The problem with getting this to work on Dp2 and higher is that DP2 is pure x64 bit, and the kexts does not work in 64bit mode - further more, apple have changed openGL version and neither the GMA945/50 or x3100 have the hardware support for that.