atgm
Members-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Articles, News and Tips
Forums
Everything posted by atgm
-
Dell Latitude E6520 Problems on both 10.8.5 and 10.9
atgm replied to GrandMstrBud's topic in The Archive
Pleased to report that the AR5BXB112 works perfectly. It detected and connected to my WEP-encrypted N network without a hitch. Hooked up the antenna cables BWG from left to right -- no clue if that matters at all. -
Dell Latitude E6520 Problems on both 10.8.5 and 10.9
atgm replied to GrandMstrBud's topic in The Archive
I'll get the AR5BXB112 and try that out, then. -
Dell Latitude E6520 Problems on both 10.8.5 and 10.9
atgm replied to GrandMstrBud's topic in The Archive
Any ideas on what I can do for a no-fuss full-height mini-PCI card then? If I put it into the WWAN slot, will it work normally? -
Dell Latitude E6520 Problems on both 10.8.5 and 10.9
atgm replied to GrandMstrBud's topic in The Archive
I wish that had been noted on the wireless card compatibility page so that I hadn't bought it. It's pretty expensive here in Japan. :-/ -
Dell Latitude E6520 Problems on both 10.8.5 and 10.9
atgm replied to GrandMstrBud's topic in The Archive
I have an E6520 on 10.9.2 with an Atheros ar5bhb112 that's detected but cannot find networks, secured or not. Any ideas? -
Two problems: Wireless Cannot Find Networks I installed an Atheros AR5BHB112 as recommended on the supported/unsupported card thread. It is detected but cannot find wireless networks. I tried to manually enter my wireless network information, but it could not find it/connect in either clear or WEP modes. My SSID is not hidden. lspci -nn returns: 03:00.0 Network controller [0280]: Atheros Communications Inc. AR9300 Wireless LAN adaptor [168c:0030] (rev 01) I've tried running MyFix quick and full and have rebooted several times with no success. The old Dell card had two antenna hookups for ch 1 and 2; I attached those to ch 1 and 2 on the Atheros card. There was a third cable that was unused; I attached that to ch 0 on the Atheros card. Is this where I went wrong? Keyboard Layout Is Not Saved I use a Japanese keyboard layout. When I reboot, the computer reverts to a US layout and I have to go to Keyboard Settings to redetect it. Is there a way to permanently set it to a Japanese layout?