Jump to content

chan1600

Members
  • Posts

    12
  • Joined

  • Last visited

Everything posted by chan1600

  1. BTW, if you gonna install triple OS. I will suggest you use Parallels desktop 9 or VMware. So you can run both OS in Mac.
  2. install those kext you will get audio. What is your network card model? You should change the airportd to get the wifi network card work. Some models don't work.
  3. Since you have set a Administrator Password Status Installed. You have to know the password to change the Access Level to administrator Then, you can Add new Boot option. If you don't know your password. you have to reset the BIOS on board. Google "how to reset CMOS on asus laptop". There are a software method or hardware method you can use. Software : Download PC CMOS CLEANER or ***I have not tried to open my asus case before. If you use hardware method, take your own risk. It would void the warranty and may damage the laptop. I have no responsibly on it. If you are not good about computer part, don't open it. Hardware: Open the case and remove the Battery on the motherboard then put it back https://www.ifixit.com/Guide/Asus+K53E+Motherboard+Replacement/10166 How to open the case, see the link first and watch the video below
  4. Go to BIOS Boot Section, Create a New Boot Name: CLOVER EFI Path:/EFI/CLOVER/CLOVERX64.efi Make sure you have made the EFI partition and copy the EFI folder to EFI partition before you make this. And, you should have a folder call Microsoft inside your EFI partition. Do you have it? It has a bootmgfw.efi inside EFI/Microsoft/Boot/
  5. I made a little video for my method. Try it out. Don't forget to set your boot device as the USB in BIOS. My method is not the best, but it works.
  6. I can't help if you use myhack. I never use it before. Did you try to follow my step? Also, you have to change your first boot device as USB
  7. Could you send me your config? DId you use the config in this post? BTW, I downloaded 10.9.4 from apple store. I will make a video 1 week later. Just bought a 2TB harddrive today. I am going to reinstall everything in it.
  8. Ok. I got my windows work now. Here is my steps: you need to make a bootable UEFI USB Drive for windows (Use option one) (If you don't know how to make, google "UEFI Bootable USB Flash Drive - Create in Windows" (first link Use option one) First, you have to partition Mac OSX Extended / Freespace to split the drive before install OSX. (You could not format fat/exfat in here, otherwise, The partition would mess up with Hybrid MBR. it cannot install windows) After you install OSX following this guide, insert the windows USB and restart. Choose windows at the bootloader. Then,install Windows in the partition which you format before. Then, you can see it in clover bootloader after finish installation. =================================================================== For ubuntu, make a bootable ubuntu disc or USB. Set Boot Device to USB/Disc Install ubuntu --> Continue until "Installation Type" then select "something else" press "+" --> Create partition --> make a 2048MB partition use as swap press "+" --> Create partition --> make you system partition use ext4 Device for boot loader installation -> (use the same one as the system partition) Install. Restart and set back your first Boot Device as Clover EFI (/EFI/CLOVER/CLOVERX64) in BIOS. Then, your bootloader would able to see the Ubuntu. DONE
  9. I did not use myhack to make my bootable drive. here is my step and work for me. Step1:Disk utility -> partition tab -> change "current" to partition 1. Option -->GUID Name it "USB". --> format Mac OS extended (journaled) --> apply --> partition Step2:Open terminal type: Wait until it say "done" it may take 10 to 15mis [i dunno Step 3 is necessary or not, but it works for me. I am newbie too. Please point it out if any step is not necessary thanks] Step3: download Clover and open it http://sourceforge.net/projects/cloverefiboot (chameleon, stolen and rebranded)/ Continue -> continue -> change install location -> select " install OS X Mavericks" Customize -> trick Install for UEFI -> theme : Bootcamp -> Drivers64UEFI: EmuVariable OsxAptioFixDrv PartitionDxe Then "install". After install you will have a EFI driver. Download the Clover EFI 2636 2.3.14.zip in this post first page Copy the "EFI folder" inside Clover EFI 2636 2.3.14 to the EFI driver. Replace All. go to the "Apps folder" inside Clover EFI 2636 2.3.14, open Showhiddenfiles app --> hit "Show special files". Now copy all kexts of efi/clover/kexts/10.9 into OS X Install USB/System/Library/Extensions and replace Then bootable USB is done. I can use it. Then go back the first page of this post and follow the rest. *Don't install AppleIntelFramebufferCapri.kext ----------------------------------------------------- If you success to install the OSX, but you don't see the bootloader after restart. Is this your problem? If yes see below, You open the config that inside the "CLOVER" FOLDER in your EFI driver. and search the "time out". change 0 to 10. <key>Timeout</key> <integer>10</integer>
  10. After I followed this guide, I got success installation of OSX on my ASUS K55A. Thank you for the this guide and members. Now, I am trying to install triple boot too. We really need a guide for it. I google UEFI triple install, then follows some guide on other forum. But I failed on it =(
  11. And, the display keep flickering on browser, pictures and some of the apps How could I fix that?? ================================= OK I know why it happen I am using intel HD4000, so I used this in my config before <key>device-properties</key> <string>7f0000000100000001000000730000000200000002010c00d041030a000000000101060000027fff04002c0000004100410050004c002c00690067002d0070006c006100740066006f0072006d002d006900640000000800000005006201140000006800640061002d0067006600780000000d0000006f6e626f6172642d31</string> Now I removed that string and don't install the AppleIntelFramebufferCapri.kext. It works fine now. So I think intel HD4000 do not actually need this string. Now trying to get wifi working My laptop is Asus K55A i7-3610QM intel HD4000 Graphics
  12. I got the OS work now~ Thank you for your guide. 1 more question for the airportd \usr\libexec\airportd I cannot find that path so where should I put the airports ============================ ok Got it too. It is a hidden folder. SO have to use the showhiddenfiles.app However, I still don't see the wifi option in System preferences-Network I cannot get the wifi work. Could someone help me please?
×
×
  • Create New...