Jump to content

macgihan

Members
  • Posts

    26
  • Joined

  • Last visited

Profile Information

  • Gender
    Not Telling

Recent Profile Visitors

2070 profile views

macgihan's Achievements

Corporal

Corporal (4/17)

3

Reputation

  1. can you post a photo of boot verbose ....
  2. here i also include DSDT patch (which should be applied to DSDT.dsl) in txt format ,, if you get troubled by copying it from web page TO_DSDT_dsl.txt
  3. @Jake Lo why my guide is locked ? even i can't modify it!!!!!!
  4. Dell Inspiron 3x37 - 5x37 -7x37 Clover Install Guide for Yosemite/El Capitan . Mainly for Dell Inspiron 3437, 3537, 3737, 5437, 5537, 5737, 7437, 7537, 7737 original guide by pokenguyen Dell Inspiron 3x37-5x37-7x37 Mavericks/Yosemite Clover Install Guide Requirements : Your Dell 3x37 - 5x37 -7x37 series laptop .. with internet connection . OS X El Capitan.app from App Store(currently version 10.11.1) or if you have OS X Yosemite.app downloaded from App Store previously place it under “Applications †folder.. Two usb flash drives (only one should be 16 GB or lager )-better if you can use usb 2.0 drives/hub Some amount of free time to read and follow those instructions carefully.. optional—since built-in intel 7260 wifi card not compatible with OS X, better WIFI+BT performance can be obtained using BCM4352HMB bios settings: update to latest(currently A13 for dell 7537) - Disk: AHCI - Intel Rapid Storage: Disabled - UEFI Boot: Enabled - Secure Boot: Disabled - Legacy Rom: enabled(to avoid distorted boot screen when booting to recovery partition) Function key behavior - muiltimedia key Here i’m using dell 7537 intel 4500U,intelHD4400,nvidia GT750M[disabled with DSDT] with 1080p display and empty 1TB 5400rm toshiba hard drive . for wifi Broadcom BCM4352 Azurewave AW-CE123H card replaced. What's working!! Native power management Accelerated graphics for HD4400 (including OpenCL) Built-in keyboard (with special function keys) Built-in trackpad WIFI+BT via BCM94352HM Built-in Audio Airdrop + Bluetooth (with handoff) using BCM94352HMB Native USB3 with AppleUSBXHCI (with USB2.0 ) Backlight controls with smooth transitions(thanks to new intel backlight kext) Touchscreen (only single touch ) All the apple services(iMessages/FaceTime ,Location services,Mac App Store,iCloud,Find My Mac etc...) Not working : Built-in web-cam. (only not working in dell 7537) Built-in SD card reader. Discrete Nvidia GT750M graphics/AMD graphics card. Pre installation: creating the OS X installer: use a flash five 16GB or above for El Capitan( better if it is usb 2.0 device) here i used 'createinstallmedia' method . prepare your usb drive: Format: osx extended journaled Name it as: install osx if you are installing El Capitan: # copy installer image sudo "/Applications/Install OS X El Capitan.app/Contents/Resources/createinstallmedia" --volume /Volumes/install_osx --applicationpath "/Applications/Install OS X El Capitan.app" --nointeraction # rename sudo diskutil rename "Install OS X El Capitan" install_osx if you are installing Yosemite: # copy installer image sudo "/Applications/Install OS X Yosemite.app/Contents/Resources/createinstallmedia" --volume /Volumes/install_osx --applicationpath "/Applications/Install OS X Yosemite.app" --nointeraction # rename sudo diskutil rename "Install OS X Yosemite" install_osx creating clover usb: For this task even 256mb flash drive would be enough(yes i have one 😉) but if you don’t ; just use a simple 4GB/8GB usb 2.0 flash drive for this process. Format:MS-DOS(FAT). name: clover. since we install Clover UEFI, run the Clover Installer package: select the target of the install to "clover†using "Change Install Location" select "Customize" (since default is legacy install -> we must change it) check "Install for UEFI booting only", "Install Clover in the ESP" ->automatically select check "Bluemac" from Themes (or you can choose whatever you like ) check "OsxAptioFixDrv-64" from Drivers64UEFI After making your selections go ahead and continue to "Install" the Clover to your USB flash drive. after installation successful you should see folder named “EFIâ€inside of your clover usb. Get EFI driver for the Clover installer(HFSPlus.efi) https://github.com/JrCs/CloverGrower...64/HFSPlus.efiandcopy it to /EFI/Clover/drivers64UEFI Remove EFI/CLOVER/kexts/10.6, 10.7, 10.8, 10.9, 10.10,10.11 but only leaving 'Other' folder and copy essential kexts to there placing Essential kexts :- FakeSMC, VoodooPS2Controller( but after installation complete we add some more …)it contains FakeSMC.kext + PlugIns(use only FakeSMC.kext for now ) You need to press F4 extract ACPI tables for your device(this takes several seconds to complete) Then select your OS X installer and press space bar and boot verbose (incase we read into a problem and to see what’s going on there ) After passing the welcome screen you have to go to Disk utility and format your entire drive as GUID partition table , Format: OS X extended journaled and close the disk utility. ********************************************************************************************************************************************************************************************************************************** Post installation. First step is install clover boot loader to your internal drive(SSD/HDD) use latest clover boot loader (which we already dowloaded ) and select the target of the install to “your system partition†using "Change Install Location" select "Customize" (since default is legacy install -> we must change it) check "Install for UEFI booting only", "Install Clover in the ESP" ->automatically select check "Bluemac" from Themes (or you can choose whatever you like ) check "OsxAptioFixDrv-64" from Drivers64UEFI install clover preferences plane install RC scripts on target volume Get EFI driver for the Clover installer(HFSPlus.efi) https://github.com/JrCs/CloverGrower...64/HFSPlus.efiandcopy it to /EFI/Clover/drivers64UEFI If you want to have Ethernet (RTL8111 (for 7x37) or RTL8100 Ethernet (for 3x37-5x37)) RTL8111:RealtekRTL8111.kext: https://github.com/RehabMan/OS-X-Realtek-Network RTL8100:RealtekRTL8100.kext: http://www.insanelymac.com/forum/top...hernet-series/ use provided config.plist_for_installer.zip >extract it and place it in EFI>CLOVER (press “replace†if it asks) open this config.plist with clover configurator.app (can be found mackie100projects.altervista.org) ACPI > GeneratePStates/CStates: uncheck , drop OEM :check SMBIOS: create your new SMBIOS (Macbook Air 6,2/Macbook Pro 11,1) with suitable Serial Number using OS X terminal.app type “uuidgen†(without quotes )several times and in smbios section >SmUUID >place the only one output there ( example: 7B831C6A-81E4-49D0-9C34-35095B2B7636 ) save the file and exit from that app. make sure that your config.plist is under EFI>clover path with the changes you made!! placing essential kext for post installation : Remove EFI/CLOVER/kexts/10.6, 10.7, 10.8, 10.9, 10.10,10.11 , only leaving 'Other' folder and copy essential kexts to there. post install Essential kexts :- FakeSMC, VoodooPS2Controller, FakePCIID_BCM94352Z_as_BCM94360CS2.kext+FakePCIID patching DSDT/SSDT: For this task you need more attention and effort to get successful results Remember we extracted our native ACPI tables at boot screen with clover F4?(i you don’t read the guide carefully) In clover usb flash drive go to: EFI>CLOVER>ACPI>origin you’ll find bunch of files copy them to folder called DSDT in desktop(we do NOT copy ACPI files that don't begin with DSDT or SSDT) simply remove others to trash so now we have only important ACPI files for disassembling precess(DSDT.aml ,SSDT-1.aml ,SSDT-2.aml etc…) Disassembling ACPI files get this iasl version and extract and place under /usr/bin path (go to finder >go to folder >type the patch) https://bitbucket.org/RehabMan/acpica/downloads now open terminal app: cd ~/Desktop/DSDT iasl -da -dl *.aml now you have disassembled your ACPI files (which have .dsl extension ) download this MacIASL version from rehabman (always good stuff ) https://github.com/RehabMan/OS-X-MaciASL-patchmatic and place it under Applications folder : open DSDT.dsl with MaciASL.app and go to preferences >set Compiler options to ACPI 5.0 Go to Sources tab then add new : Name: Laptop patches URL: http://raw.github.com/RehabMan/Laptop-DSDT-Patch/master Close Preferences window, click Patch button, paste the code then apply: # Syntax errors into definitionblock code_regex External\s+\(_SB_\.PCI0\.PEG0\) remove_matched; into definitionblock code_regex External\s+\(_SB_\.PCI0\.PEG0\.PEGP\) remove_matched; into definitionblock code_regex External\s+\(_SB_\.PCI0\.RP05\.PEGP\) remove_matched; into definitionblock code_regex External\s+\(_SB_\.PCI0\.PEG0,\sUnknownObj\) remove_matched; into definitionblock code_regex External\s+\(_SB_\.PCI0\.PEG0\.PEGP,\sUnknownObj\) remove_matched; into definitionblock code_regex External\s+\(_SB_\.PCI0\.RP05\.PEGP,\sUnknownObj\) remove_matched; into method label _L69 code_regex Notify\s\(\\_SB\.PCI0\.PEG0\.PEGP,\s0x02\) remove_matched; into method label ADBG replace_content begin Return(0) end; into method label HRPR code_regex (OperationRegion.*)\\_GPE.MMTB\s+\(0x04\), replace_matched begin %1\\_GPE.MMTB, 0x04)\n end; into method label HRPR code_regex (Field\s+\(HRPE.*\n.*\n.*\n.*\})\) replace_matched begin %1 end; into method label _WAK code_regex Store\s\(\\_GPE\.MMTB\s\(Local2,\s\\_GPE\.OSUP\s\(Local2\)\),\sStore\s\(Local1,\sREG6\)\) remove_matched; into method label _INI code_regex Store\s\(\\_GPE\.MMTB\s\(Local3,\s\\_GPE\.OSUP\s\(Local3\)\),\sStore\s\(Local2,\sREG6\)\) remove_matched; into method label _INI parent_label _SB.PCI0 code_regex (Store\s\(\\_GPE\.MMTB.*) replace_matched begin // %1 end; into method label _WAK code_regex (Store\s\(\\_GPE\.MMTB.*) replace_matched begin // %1 end; # Prevent freeze caused by WMI into method label WMIA replace_content begin // nothing end; # Force BAT0 device into method label _STA parent_label BAT0 replace_content begin Return (0x1F) end; # Fix PNOT method into method label PNOT replace_content begin // nothing end; # Enable functions keys # Override DSDT oemId (for Clover, since it patches with "Apple ") into method label _DSM parent_label PS2K remove_entry; into device label PS2K insert begin Method (_DSM, 4, NotSerialized)\n {\n If (LEqual (Arg2, Zero)) { Return (Buffer() { 0x03 } ) }\n Return (Package()\n {\n // Note: Function key part seems to not be necessary // "AAPL,has-embedded-fn-keys", Buffer() { 0x01, 0x00, 0x00, 0x00 },\n "RM,oem-id", "DELL",\n })\n }\n end; # Inject Audio info into method label _DSM parent_label HDEF remove_entry; into device label HDEF insert begin Method (_DSM, 4, NotSerialized)\n {\n If (LEqual (Arg2, Zero)) { Return (Buffer() { 0x03 } ) }\n Return (Package()\n {\n "layout-id", Buffer() { 0x03, 0x00, 0x00, 0x00 },\n "hda-gfx", Buffer() { "onboard-1" },\n "PinConfigurations", Buffer() { },\n })\n }\n end; click compile ; if no errors you can go to next steps ….(if not you have to fix them) click patch again : Rename GFX0 to IGPU 7/8-series USB IRQ Fix SMBUS Fix RTC Fix Shutdown Fix 2 HPET Fix OS Check Fix(Windows 7) AC Adapter Fix Add MCHC Fix _WAK arg0 2 Fix PNOT/PPNT Add IMEI Fix _WAK IAOE Rename B0D3 to HDAU USB3 _PRW(0x6D)—-to fix instant wake from sleep Add MCHC [battery]Dell-Inspiron-15-7xxx may add if more…(depending on what’s need to be fixed/errors you have) click compile again if no error you can proceed(otherwise have to fix) click patch again and apply this patch (to fix brightness controlling issue with some systems) into method label _DSM parent_label PS2K remove_entry; into device label PS2K insert begin Method (_DSM, 4, NotSerialized)\n {\n If (LEqual (Arg2, Zero)) { Return (Buffer() { 0x03 } ) }\n Return (Package()\n {\n "RM,oem-id", "DELL",\n "RM,oem-table-id", "HSW-LPT",\n })\n }\n end; if it compiles without errors you can continue.. this step is only if you are installing 10.11 or above relating to usb problems. again apply this code (by rehabman) # rename EHC1 to EH01 into device label EHC1 set_label begin EH01 end; into_all all code_regex EHC1. replaceall_matched begin EH01. end; into_all all code_regex .EHC1, replaceall_matched begin .EH01, end; # rename EHC2 to EH02 into device label EHC2 set_label begin EH02 end; into_all all code_regex EHC2. replaceall_matched begin EH02. end; into_all all code_regex .EHC2, replaceall_matched begin .EH02, end; after compilation without errors save those patched files(in separate location) both ACPI Machine Language Binary(file format:.aml) & disassembled ASL(file format: .dsl>>>>for future modifications/fix problems) now find and open SSDT-7.dsl open it with same MaciASL and patch: Rename GFX0 to IGPU Haswell HD4400/HD4600/HD5000 Brightness fix (Haswell/broadwell ) Click Compile to check for errors, if no error, you can save the file with File Format: ACPI Machine Language Library, name SSDT-1.aml in separate location (location like where you saved your DSDT.aml) [FOR MODEL WITH NVIDIA/AMD] Go to DSDT folder on desktop, find SSDT-8.dsl, open MacIASL and apply the patch into scope label \_SB.PCI0.GFX0 remove_entry; into definitionblock code_regex External\s+\((.*_SB_\.PCI0\.GFX0\.DD02\._BCM),\s+IntObj\) replace_matched begin External(%1, MethodObj) end; into method label _BCM parent_label DD02 code_regex Return\s+\(([^\)]*)\)\n.*Arg0 replace_matched begin %1(Arg0) end; into method label _BCM parent_label DD02 code_regex Return\s+\(([^\)]*)\)[^\n]*\n.*Arg0 replace_matched begin %1(Arg0) end; into method label WMMX code_regex If\s\(CondRefOf\s\(\\_SB\.PCI0\.GFX0\._DSM[^}]*\} replace_matched begin //nothing end; # rename GFX0 into_all all code_regex \.GFX0 replaceall_matched begin .IGPU end; into_all all label \_SB.PCI0.GFX0 set_label begin \_SB.PCI0.IGPU end; # call _OFF from _SB.PCI0.RP05.PEGP into method label _INI parent_label \_SB.PCI0.RP05.PEGP code_regex . insert begin _OFF()\n end; Click Compile to check for errors, If no error, you can save the file with File Format: ACPI Machine Language Library, name SSDT-2.aml in separate location ((location like where you saved your DSDT.aml+SSDT-1.aml) if you have SSDT-9.dsl Open SSDT-9.dsl, apply this patch then save as SSDT-3.aml: into definitionblock code_regex External\s+\((.*_SB_\.PCI0\.GFX0\.DD02\._BCM),\s+IntObj\) replace_matched begin External(%1, MethodObj) end; into method label _BCM parent_label DD02 code_regex Return\s+\(([^\)]*)\)\n.*Arg0 replace_matched begin %1(Arg0) end; into method label _BCM parent_label DD02 code_regex Return\s+\(([^\)]*)\)[^\n]*\n.*Arg0 replace_matched begin %1(Arg0) end; into method label WMMX code_regex If\s\(CondRefOf\s\(\\_SB\.PCI0\.GFX0\._DSM[^}]*\} replace_matched begin //nothing end; # rename GFX0 into_all all code_regex \.GFX0 replaceall_matched begin .IGPU end; into_all all label \_SB.PCI0.GFX0 set_label begin \_SB.PCI0.IGPU end; copy all DSDT.aml+SSDT-1.aml+SSDT-2.aml+SSDT-3.aml[if you have] to /EFI/Clover/ACPI/patched/ (of internal EFI partition) For power management: generate SSDT for your native power management-get this tool: https://bitbucket.org/dhnguyenit/hp-probook-installer-clover-edition/downloads only select SSD generator >install (this tool will patch your cpu PM and place it under EFI>clover>ACPI>patched named “ssdt.amlâ€) Done 😃 patching DSDT/SSDT section. Kexts installation Working backlight control with smooth transition; using New Brightness kext, IntelBacklight.kext(from rehabman) https://github.com/RehabMan/OS-X-Intel-Backlight For this kext, you can use your existing: PNLF patch ("Brightness Fix (HD3000/HD4000)", or "Brightness Fix (Haswell/Broadwell)", Or you can just use the simple "Brightness Fix" (which is easier to apply). ( we already patched so kext installation is enough) but if it didn’t work for your laptop(most of the time it should work this series of laptops) try second method ACPIBacklight.kext. For Haswell, and Broadwell (HD4400/HD4600/HD5000+, HD5500/HD6000+). https://github.com/RehabMan/OS-X-ACPI-Backlight Fix intel HD4400: https://bitbucket.org/RehabMan/os-x-...i-id/downloads Install both FakePCIID.kext and FakePCIID_HD4600_HD4400.kext in /System/Library/Extensions, EFI/Clover/kexts, or /Library/Extensions (10.11+).{which we already done no need to do anything, just remark} use config plist >kexts to patch provided(which means again you don’t have to nothing already done for you ) when using BCM94352HMB WiFi+BT FYI: card that i used http://www.ebay.co.uk/itm/Broadcom-BCM4352-Azurewave-AW-CE123H-WiF-i-BT-867Mbps-Bluetooth-4-0-Hackintosh-/281300566338?pt=LH_DefaultDomain_0&hash=item417ed20142 For WIFI place FakePCIID_BCM94352Z_as_BCM94360CS2.kext+FakePCIID (which we already did) EFI>clover kexts>otherFor BT BrcmPatchRAM2.kext+BrcmFirmwareRepo.kext in System/Library/Extentions using kext installer (kext wizard) kext wizard app as i found : http://www.insanelymac.com/forum/topic/253395-kext-wizard-easy-to-use-kext-installer-and-more/ Final steps…. Clear Network Settings to Fix iCloud/AppStore If you use any USB Wifi device, or use Mobile Phones to connect to Internet before completing the guide, you won't be able to access to AppStore or iCloud. You must reset your network settings: - Go to /Library/Preferences/SystemConfiguration/ and delete these files: CaptiveNetworkSupport com.apple.airport.preferences.plist com.apple.network.eapolclient.configuration.plist NetworkInterfaces.plist - Go to System Preferences > Network, delete all connection. Then restart to bios settings add clover as boot option - Go to System Preferences > Network, add your connection again. How to add clover as boot option in your system bios : boot >add boot option(may vary some laptops slightly) Boot option name >>Clover(or name you like)>>>press tab file system list >do not modify anything >just press tab File Name:EFI\BOOT\BOOTX64.efi save and move clover entry to the top of boot oder Go to BIOS, move the Clover boot entry to top. problem meets solutions….. Fix Audio:layout id 3 by using rehab man’s ALC 283 kext) Lenovo-U430-Touch-DSDT-Patch and install ALC_283kext using kext wizard Audio: After installing new/updated kexts or after the initial installation, you may lose audio. To fix: reboot without caches (hit space at Clover, select without caches) rebuild cache: sudo touch /System/Library/Extensions && sudo kextcache -u / reboot normally (if needed, two times) No Audio after sleep? install codec commander from rehabman in S/L/E RehabMan/EAPD-Codec-Commander if you have "Laptop won't sleep/shutdown after a few hours of uptime" which can be fixed by updating ME firmware ,either you can fix it by adding kexts to patch under kernel and kext patches in provided config plist(note :patches not included in the given config.plist) credits for original patch vbo use plist edit pro/Xcode(free from App Store) add above patches to your config plist <dict> <key>Name</key> <string>AppleIntelFramebufferAzul</string> <key>Comment</key> <string>AppleIntelMEIDriver::writeMessageToME</string> <key>Find</key> <string>4883EC1844894DD04589C589CB</string> <key>Replace</key> <string>4883EC18E9E5010000909089CB</string> </dict> <dict> <key>Name</key> <string>AppleIntelFramebufferAzul</string> <key>Comment</key> <string>AppleMEClientController::start</string> <key>Find</key> <string>4885C00F8405030000488B05E50D0100488945D0</string> <key>Replace</key> <string>4885C0E90603000090488B05E50D0100488945D0</string> </dict> fix usb fix El Capitan (you’ll need to create a port injector to fix your various usb related issues (most of time usb 3.0) here i’ll attach my usb injector for dell 7537 (but better to create your own by following this guide:(further info use google to "fix usb El Capitan") Windows 8 UEFI Dual Boot - Use Disk Utility to prepare a Mac OS X Extended partition (don’t use Fat32, Disk Utility may mess up your drive) - Create a FAT32 usb drive, extract Windows 8 64-bit iso there - Boot to usb drive, format the new partition to NTFS, install Windows there. - Go to BIOS, move the Clover boot entry to top. Tested laptops: Dell 7537 &dell 3537 Good luck!!! USBXHC_Dell.kext.zip config.plist_for_installer.zip
  5. i have working on very detailed guide on this laptop series about usb problem you guys need to create an port injector to each and every single laptop https://osxlatitude.com/index.php?/topic/8526-guide-dell-inspiron-3x37-5x37-7x37-clover-yosemiteel-capitan/?p=54841 here is the injector for Dell 7537 laptop(only for 7537) USBXHC_Dell.kext.zip
  6. if anyone interested in guide update to 10.11 ? i have wrote a guide and would like to extend this guide with all fixes currently not working only webcam on my system dell 7537
  7. i also have black screen at camera. Integrated_Webcam_HD: Product ID: 0x6705 Vendor ID: 0x0c45 (Sonix Technology Co., Ltd.) Version: 37.10 Speed: Up to 480 Mb/sec Manufacturer: CN0DWGV87248738KM5BKA00 Location ID: 0x1d150000 / 5 Current Available (mA): 500 Current Required (mA): 500 Built-In: Yes
  8. Dell 7537 i7-4500U Intel 4400+nvidia gt750(but disableed with dsdt) ALC 283 can you please help me to get my audio working thanks codec_dump (1).txt
  9. can anyone help me to get audio for my dell 7537 (ALC 283 with layout id 86) for osx 10.10.3
  10. so same as mine huh!! try connect usb 2.0 hub with your bootable drive
×
×
  • Create New...