tonio92 Posted November 5, 2017 Share Posted November 5, 2017 hi Hervé i have tested my laptop with the pack E6540-optimus bios A17 and the result is the same. loop during the loading between acpibatterymanager and displaypolicy please confirm that there is not update patch for the intel graphics boards : i have read that for a HD4000 with a new ig-platform-id for high sierra ? <key>ig-platform-id</key> <string>0x01660003 <key>Inject</key> <dict> <key>ATI</key> <false/> <key>Intel</key> <true/> <key>NVidia</key> <false/> </dict> <key>NvidiaSingle</key> <false/> <key>ig-platform-id</key> <string>0x01660003</string> </dict> <key>KernelAndKextPatches</key> <dict> <key>AppleRTC</key> <true/> <key>AsusAICPUPM</key> <true/> <key>Debug</key> <false/> <key>KernelCpu</key> <false/> <key>KernelHaswellE</key> <false/> <key>KernelLapic</key> <false/> <key>KernelPm</key> <false/> <key>KextsToPatch</key> <array> <dict> <key>Comment</key> <string>HD4000 0x01660003 FrameBuffer 8 MB</string> <key>Disabled</key> <true/> <key>Find</key> <data> AwBmAQECBAIAAAAEAAAAAQ== </data> <key>Name</key> <string>AppleIntelFramebufferCapri</string> <key>Replace</key> <data> AwBmAQECBAIAAAAEAACAAA== </data> </dict> <dict> <key>Comment</key> <string>HDMI-audio HD4000 0x01660003, port 0304</string> <key>Disabled</key> <false/> <key>Find</key> <data> AwQAAAAEAACBAAAA </data> <key>Name</key> <string>AppleIntelFramebufferCapri</string> <key>Replace</key> <data> AwQAAAAIAAAGAAAA </data> </dict> <dict> <key>Disabled</key> <false/> <key>Find</key> <data> QVBQTEUgU1NE </data> <key>Name</key> <string>IOAHCIBlockStorage</string> <key>Replace</key> <data> AAAAAAAAAAAA </data> </dict> </array> </dict> <key>RtVariables</key> <dict> <key>BooterConfig</key> <string>0x28</string> <key>CsrActiveConfig</key> <string>0x67</string> <key>ROM</key> <string>UseMacAddr0</string> </dict> Link to comment Share on other sites More sharing options...
Administrators Hervé Posted November 5, 2017 Administrators Share Posted November 5, 2017 HD4000 ??? You're very mistaken. That's Ivy Bridge integrated graphics... You stated it yourself: you have HD4400 graphics, i.e. one of Intel's Haswell iGPU. You're meant to use Azul Layout #12 (layout-id 0x0a260006) and fake desktop HD4600 is 0412. Link to comment Share on other sites More sharing options...
tonio92 Posted November 5, 2017 Share Posted November 5, 2017 yes , i have done a error and confusion in the dfferent name of graphics boards Because of the new IntelGraphicsFixup with Lilu.kext, it is possible to delete the original patch : <dict><key>Comment</key><string>Enable 9MB cursor bytes, 0x0a260006</string><key>Disabled</key> it seem to be used on E7440 desktop do you think that this solution is better for my bootpack best regards Link to comment Share on other sites More sharing options...
Administrators Hervé Posted November 5, 2017 Administrators Share Posted November 5, 2017 It's disabled, so you can clearly remove it... But that will not make any difference. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 5, 2017 Moderators Share Posted November 5, 2017 @tonio92 Replace the attached contents into /EFI/Clover Files updated for HS GT720M disabled via DSDT E5440_Disable_GT720M.zip Link to comment Share on other sites More sharing options...
tonio92 Posted November 6, 2017 Share Posted November 6, 2017 hi joe , thank you for you job. it is now possible to enter in the first menu of OSX to format ssd and install high sierra i will done to you some news after a full check best regards Link to comment Share on other sites More sharing options...
tonio92 Posted November 7, 2017 Share Posted November 7, 2017 hi all, i have installed high sierra in my E5440 with a partition in HFS+ (i used a SSD) After clover boot , and initialized the ssd in HFS+ , i launch the installation in a terminal with the command : /Volumes/"Image Volume"/"install macOS High Sierra.app"/Contents/Resources/startosinstall --volume /Volumes/"HighSierra" --agreetolicense --converttoapfs NO some kexts are copied to S/L/E ( AppleBacklightInjector.kext,AppleHDA_ALC292.kext,CodecCommander.kext,andDisableTurboBoostBattery.kext) Audio /wifi/camera/USB/are now OK I have a module Bluetooth BCM20702A0. To activate this module i try to compile two old kexts (ok with sierra) Brcmfirmwarerepo.kext and brcmpatchram2.kext bluetooth is activated but impossible to connect a device. a solution ? best regards Link to comment Share on other sites More sharing options...
black.dragon74 Posted November 7, 2017 Share Posted November 7, 2017 @tonio92 Did you try BTFirmwareUploader.kext? Also, please tell me your device's product and vendor id. Regards Link to comment Share on other sites More sharing options...
tonio92 Posted November 7, 2017 Share Posted November 7, 2017 hi black dragon my bluetooth product is defined as follows : Link to comment Share on other sites More sharing options...
Recommended Posts