nareto Posted November 25, 2017 Share Posted November 25, 2017 Hi everyone After I have tried hard digging info from the web's thread, I am done!and I really need your help. I bought a HP Slimline which comes with Core i3-7100 CPU. it has an Intel HD630. It's a small PC. My problem is I cannot enable QECI on the PC. I tried: FakeID> IntelGFX 0x19168086 ig-platform-id 0x19160000 FAKECPUID 0506e3 FakePCIID+ FakePCIID Intelgraphics S/L/E intelfixup + lilu L/E Still have no luck. then I tried FakeID> IntelGFX 0x59128086 ig-platform-id 0x59120000 FAKECPUID 0506e3 it was the same Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted November 25, 2017 Administrators Share Posted November 25, 2017 at boot try disable all your graphics related patches above using clover GUI option menu and only leave inject intel on. that should allow clover to auto detect the graphics. you can probably leave LILU and intel graphics fixup but you might want to add also the intel DVMT kext but move them from L/E to clover /kext /other folder Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 25, 2017 Moderators Share Posted November 25, 2017 For native HD 630 support, make sure to install 10.12.6 and up. No need to fake CPUID if you're using platform id 0x59120000 Link to comment Share on other sites More sharing options...
nareto Posted November 26, 2017 Author Share Posted November 26, 2017 here are what I did. Update OS to 10.12.6 FakeID> IntelGFX 0x19168086 . (TRIED 0x59128086 it didn't work. it caused kernel panic)ig-platform-id BLANK FAKECPUID BLANKFakePCIID+ FakePCIID Intelgraphics Move from S/L/E to L/Eintelfixup + lilu L/E DELETED from L/E Kext rebuilt . Result was the same. FakeID> IntelGFX BLANKig-platform-id 0x59120000 FAKECPUID BLANK the Result , it booted to kernel panic. It 's still the same. what should i do next? please Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 26, 2017 Moderators Share Posted November 26, 2017 what was the KP? You need to set the DVMT or use Lilu.kext + IntelGraphicsDVMTFixup or use Rehabman's 32MB BIOS patch Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted November 26, 2017 Administrators Share Posted November 26, 2017 maybe you should be trying to install High Sierra Link to comment Share on other sites More sharing options...
nareto Posted November 27, 2017 Author Share Posted November 27, 2017 I might need sierra. but lets try again. I lll post kext IOreg and configplist, so you will be able to find out which way. Link to comment Share on other sites More sharing options...
nareto Posted December 1, 2017 Author Share Posted December 1, 2017 IOreg Config and kext I also have already installed IntelGraphicsDVMTFixup, intelfixup and lily.kext in the L/E. EFI.zip Archive.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted December 1, 2017 Moderators Share Posted December 1, 2017 If you're on 10.12.6 and higher, you can use ig-platform-id 0x59120000, fakeID IntelGFX = 0x59128086 If you're running anything below, then use ig-platform-id 0x19120000, fakeID IntelGFX = 0x19128086, FakeCPUID = 0x0506E3 In your Config, you're injecting 0x19320001 which is incorrect. Link to comment Share on other sites More sharing options...
nareto Posted December 3, 2017 Author Share Posted December 3, 2017 I will reinstall 10.12.6 again. From what I found I installed 10.12.5 and upgrade to 10.12.6. Even I changed ig-platform-id 0x59120000, fakeID IntelGFX = 0x59128086. It gave the same result. I only booted it by using 0x19320001 or 0x19120000 with FakeCPUID = 0x0506E3 (as you saw in my config.) Last night I did again. I used ig-platform-id 0x59120000, fakeID IntelGFX = 0x59128086 but it booted kernel panic. When I checked in System report> graphics /display. it said "kext not loaded". Link to comment Share on other sites More sharing options...
Recommended Posts