Moderators Jake Lo Posted March 16, 2018 Moderators Share Posted March 16, 2018 Yes, should work on High Sierra too. Can you attach IOReg? 1 Link to comment Share on other sites More sharing options...
fmac Posted March 16, 2018 Author Share Posted March 16, 2018 Hi, No, keyboard and touchpad are working perfectly. I'll find audio chip. I keep you informed Can i use this EFI for High Sierra ? does i need tuning ? Hallo please can you share your ioreg for audio : my is a ALC256, i'm injecting audioid "56" and have the SSDT-ALC256.aml in E/C/A/patched no need for codeccommander thanks Link to comment Share on other sites More sharing options...
quartz38 Posted March 17, 2018 Share Posted March 17, 2018 Hi all, Here is my ioreg. 5580.ioreg.zip Link to comment Share on other sites More sharing options...
quartz38 Posted March 17, 2018 Share Posted March 17, 2018 for audio : my is a ALC256, i'm injecting audioid "56" and have the SSDT-ALC256.aml in E/C/A/patched no need for codeccommander thanks I tried it, no more chance with audio which SSDT-ALC256.aml did you used ? Link to comment Share on other sites More sharing options...
fmac Posted March 18, 2018 Author Share Posted March 18, 2018 Hallo for me it wasn't working the first time, install and restart is not enough you have to do a clean install with your Clover with your patched DSDT and your kexts and any patches in config.plist you made your hackintosh working after that I had audio working right from the beginning regards Link to comment Share on other sites More sharing options...
quartz38 Posted March 18, 2018 Share Posted March 18, 2018 Hi fmac, I did a fish install and sound is here but bad quality ? any suggestions ? Your advise was good even if there is no logic for this .... Thanks for help Regards Edit : sound bad quality solved with codeccommander.. that's all 2 Link to comment Share on other sites More sharing options...
fmac Posted March 25, 2018 Author Share Posted March 25, 2018 Hallo again did some tests to setup my "hackmacbook" dual monitor is working, 1. internal and 2. external via HDMI but I can't get HDMI audio to work sometimes I have the device in ioregistryexplorer (see file ) but I can't say why the next restart its gone. did some searches, but Kabylake is a littlebit difficult found something about device HDAU, but its not existing in my DSDT FakePCIID.kext and FakePCIID_Intel_HDMI_Audio.kext isn't working too Regards IOHDACODECDevice_exist.zip config.plist.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted March 25, 2018 Moderators Share Posted March 25, 2018 According to the IOReg, port #5 (0105) where HDMI is connected, it shows DisplayPort instead. I checked the Config file, it's correctly patched to HDMI, so not sure why it's not updating. Try repair permission and rebuild cache... Sometimes these hot patches don't always work perfectly, so might have to manually patch the kext. Link to comment Share on other sites More sharing options...
fmac Posted March 26, 2018 Author Share Posted March 26, 2018 Hallo it works only with this method : restart in Clover, press Fn,F8 (to make HDMI monitor the main screen, and the only working, internal changes to black) lets start thats all but I can't activate the internal screen keys Fn,F8 is not working in macOS is this standard ? Regards HDMI_Audio_works.zip Link to comment Share on other sites More sharing options...
quartz38 Posted March 26, 2018 Share Posted March 26, 2018 Hi jake, Received my broadcom wifi card today. Bluetooth ok but no wifi. I used your file modified quartz38 from post above. Any advice ? Thanks Link to comment Share on other sites More sharing options...
Recommended Posts