osxosx Posted April 27, 2018 Share Posted April 27, 2018 I have got huge problems (maybe only huge for me) to get Kernel loaded after Clover Boot-Menu selection. Always reboot. Maybe wrong BIOS settings? Do not know ... Anyone having experiances with this Haswell Book? Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted April 27, 2018 Administrators Share Posted April 27, 2018 turn on "kernel pm" patch and "fix headers" acpi fix Link to comment Share on other sites More sharing options...
Administrators Hervé Posted April 27, 2018 Administrators Share Posted April 27, 2018 Not seen this model here so you're the 1st. Please post your system's specs (CPU, GPU, audio, LAN, wireless, USB, etc.) as well as a zipped copy of your Clover config file. Haswell laptops need KernelPm patch enabled. Link to comment Share on other sites More sharing options...
osxosx Posted April 27, 2018 Author Share Posted April 27, 2018 These are the specs: - Fujitsu Lifebook T904 with BIOS Version 1.13 - Intel i5-4300U CPU - Haswell-ULT Chipset - 4GB DDR3 Ram placed at "Bank 2" (only one physical bank) @1600MHz - Intel HD4400 integrated Graphics (according to CPU) - WQHD IGZO TouchScreen Display with 2560x1440 Resolution - Crucial 250GB SSD Harddrive - Intel N 7260 Wifi (has to be replaced) - Sierra EM7355 Mobile Broadband (GPS included) - Bluetooth 4.0 LE - Intel 218LM Ethernet - Realtek ALC283 Audio Codec - Fingerprint Sensor - 2x USB 3.0 Ports (including One Anytime Charge) BIOS settings I have tried for legacy, but System always boots in UEFI: - Boot config: CSM enabled, Fastboot disabled - CPU Features: Multicore enabed, HT enabled, Virtualisation Technology disabled, Intel VT-d disabled - Legacy USB support enabled, SCSI subclass enabled, XHCI Controller mode: Compatible - Hardware PowerManagement: Disabled; Intel Rapid Start disabled, Intel Smart Connect disabled - TPM Chip disabled - Secure boot disabled - Secure boot Option disabled - Boot device: internal Harddisk Attached my last EFI Folder after 16 tries ... !!! MANY THANKS TO Jake Lo FOR ALL HIS HELP UNTIL THIS MOMENT !!! EFI_T904_try-16.zip Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted April 27, 2018 Administrators Share Posted April 27, 2018 sounds like your pretty much sorted where are you having an issue maybe post a picture of the KP. oh also disable fastboot Link to comment Share on other sites More sharing options...
osxosx Posted April 27, 2018 Author Share Posted April 27, 2018 There is no KP because System always reboots before Kernel load. No text output after selecting Boot-Menu entry. Reboot approximately after 4 seconds. (Suggest "++++++++++++++++++++++++++++++++++" shows kernel load!?) Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted April 27, 2018 Administrators Share Posted April 27, 2018 ok you need to replace osxaptiofixdrv efi clover driver with aptiofix efi driver but it could also be because your ram is in slot 2 not slot1 Link to comment Share on other sites More sharing options...
osxosx Posted April 27, 2018 Author Share Posted April 27, 2018 Yes, i have tried both Aptio-Fix drivers without success. Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted April 27, 2018 Administrators Share Posted April 27, 2018 ok try with this clover I just compiled from todays sources it should have AptioMemoryFix as a driver option disable all the OsxAptiofixDRV in drivers selection screen. Clover_v2.4k_r4448.zip Link to comment Share on other sites More sharing options...
osxosx Posted April 27, 2018 Author Share Posted April 27, 2018 Thanks. Unfortunately I can not check this before next week ... Link to comment Share on other sites More sharing options...
Recommended Posts