Tường Nguyễn Posted May 20, 2018 Share Posted May 20, 2018 hello, I've successfully install High Sierra on E7480 i6600U. But i don't know choose what kext, now the touchpad does not working, i can't adjust brightness and sleep Processor : i7-6600U Processor Graphics Processor(GPU) : Intel® Integrated HD Graphics 520 Chipset : 6th Generation Intel® Core Storage : 256GB Drive M2 2280 SATA RAM : 8GB DDR4 SDRAM 2133 MHz; 2 slots supporting up to 16GB Wifi : Intel LAN : Intel I219-LM PCI-E Gigabit Ethernet Adapter Audio : Realtek® High Definition Audio ALC293 (ALC3235) USB 3.0 : Intel USB 3.0/3.1 xHCI Controller Touchpad : Alps Multi-touch Touchpad v7 Hardware Webcam : USB3.0 UVC HD WebCam Card reader : Dual Pointing, 82 key with Smartcard, Contactless Smartcard, Fingerprint Reader,Thunderbolt 3 Monitor : 14" FHD (1920 x 1080) Anti-Glare, Camera & Mic, WLAN Capable CLOVER.zip debug_30579.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted May 20, 2018 Moderators Share Posted May 20, 2018 try the clover folder from this post Link to comment Share on other sites More sharing options...
Tường Nguyễn Posted May 20, 2018 Author Share Posted May 20, 2018 That clover for i7600u, but i use i6600u? i did try, but i didn't find where to boot? Link to comment Share on other sites More sharing options...
Tường Nguyễn Posted May 20, 2018 Author Share Posted May 20, 2018 I added apfs, so i stared mac, but i still see same error debug_6207.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted May 20, 2018 Moderators Share Posted May 20, 2018 Are you sure your audio is ALC293 and not ALC256? Here, replace the Config file and DSDT.aml with the attached Once booted, do the following: Remove the following kexts from /L/E AppleHDA_ALC293.kext Remove from /S/L/E <- duplicate from /L/E EAPDFix.kext AppleBacklightInjector.kext ACPIBacklight.kext Add to /S/L/E VoodooI2CHID.kext & VoodooI2C ( you already got this one) https://github.com/alexandred/VoodooI2C/releases Repair permission and rebuild cache Reboot 7480_Tuóng.zip Link to comment Share on other sites More sharing options...
Tường Nguyễn Posted May 20, 2018 Author Share Posted May 20, 2018 (edited) Touchpad is work, but i don't adjust brightness, and when i pull or plug the Adapter, incidentally touchpad or mouse not work, audio work but when i plus headphone, both speaker and headphone sounds annoying debug_4803.zip Edited May 20, 2018 by Tường Nguyễn Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted May 20, 2018 Moderators Share Posted May 20, 2018 Disable Legacy Option ROMs if you have it enabled You still have duplicates kexts, look at the kextcache log... Remove from /S/L/E AppleBacklightInjector.kext AppleALC.kext FakePCIID_Intel_HD_Graphics.kext FakePCIID.kext FakePCIID_Broadcom_WiFi.kext BrcmPatchRAM2.kext BrcmFirmwareRepo.kext Remove EAPDFix.kext from /L/E and replace it with CodecCommander.kext for audio Repair permission and rebuild cache Link to comment Share on other sites More sharing options...
Tường Nguyễn Posted May 20, 2018 Author Share Posted May 20, 2018 Oh no, after fix follow your guide, trackpad, battery, audio, and brightness not work debug_251.zip Link to comment Share on other sites More sharing options...
Tường Nguyễn Posted May 20, 2018 Author Share Posted May 20, 2018 And after boot and few seconds, display turn off, i have to boot by USB Link to comment Share on other sites More sharing options...
Tường Nguyễn Posted May 20, 2018 Author Share Posted May 20, 2018 Oh sorry, because i boot from USB, trackpad, battery, audio, and brightness not work, so now i try again and boot susses, audio work, but adjust brightness not work and display laptop turn off, i have to use out display through hdmi. What do you think about speedtcep? debug_251.zip Link to comment Share on other sites More sharing options...
Recommended Posts