Jump to content

Using Sierra EM7455 under Mojave 10.14


ys_lalan

Recommended Posts

What is the status of your WWAN card? ONLINE, LOW POWER MODE or something else?

 

It is possible your device is not properly initialized. Can you post Legacy_Sierra_QMI.kext that you are using? Info inside must match your device.


If your device is in ONLINE mode send PPP log, so we can try to figure out what is wrong.

 

If your device is in LOW POWER MODE, you can try to bring it to ONLINE mode. Check BIOS and try with WiFi keyboard switch like would you do in Windows (FN + button with WiFi icon).

 

 

Link to comment
Share on other sites

hello my card is viwed as usb and in wwan but not present in system preferences in network, i have set it up in Linux, i have set up com port 8, can somebody help me?

 

USBCOMP is 8, and 14 is not supported in this card.

 

I have addet the kext that i am using, i have Mojave installed.

 

It is written on the wwan card that is EM7455

 

Screenshot 2019-03-16 at 23.14.28.png

Screenshot 2019-03-17 at 12.26.21.png

Screenshot 2019-03-17 at 12.29.20.png

Legacy_Sierra_QMI.kext.zip

Link to comment
Share on other sites

On 10/20/2018 at 10:04 PM, viking1304 said:

What is the status of your WWAN card? ONLINE, LOW POWER MODE or something else?

 

It is possible your device is not properly initialized. Can you post Legacy_Sierra_QMI.kext that you are using? Info inside must match your device.


If your device is in ONLINE mode send PPP log, so we can try to figure out what is wrong.

 

If your device is in LOW POWER MODE, you can try to bring it to ONLINE mode. Check BIOS and try with WiFi keyboard switch like would you do in Windows (FN + button with WiFi icon).

 

 

Hello my modem is ONLINE but does not connect i have the correct apn settings this is my ppp log can you help me?

 

Mon Mar 18 22:54:38 2019 : Waiting for connection
Mon Mar 18 22:54:38 2019 : CCLMatched : ERROR\13\10
Mon Mar 18 22:54:38 2019 : Modem error; the modem is not responding.
Mon Mar 18 22:54:38 2019 : CCLExit: -6019 (Modem error, modem not responding.)
Mon Mar 18 22:54:38 2019 : Connect script failed
 

Link to comment
Share on other sites

hello again, i have managed to viwe my modem in system pref when i do try to connect i get this error 

 

Tue Mar 19 22:14:44 2019 : publish_entry SCDSet() failed: Success!
Tue Mar 19 22:14:44 2019 : publish_entry SCDSet() failed: Success!
Tue Mar 19 22:14:45 2019 : Apple Base Script.ccl Version 3.3
Tue Mar 19 22:14:45 2019 : CCLWrite : AT\13
Tue Mar 19 22:14:45 2019 : CCLMatched : OK\13\10
Tue Mar 19 22:14:45 2019 : Initializing device: AT&FE0Q0V1
Tue Mar 19 22:14:45 2019 : CCLWrite : AT&FE0Q0V1\13
Tue Mar 19 22:14:45 2019 : CCLMatched : OK\13\10
Tue Mar 19 22:14:45 2019 : Initializing PDP context: AT+CGDCONT=1,"IP","internet"
Tue Mar 19 22:14:45 2019 : CCLWrite : AT+CGDCONT=1,"IP","internet"\13
Tue Mar 19 22:14:45 2019 : CCLMatched : OK\13\10
Tue Mar 19 22:14:45 2019 : Dialing: ATD*99***1#
Tue Mar 19 22:14:45 2019 : CCLWrite : ATD*99***1#\13
Tue Mar 19 22:14:45 2019 : Waiting for connection
Tue Mar 19 22:14:45 2019 : CCLMatched : ERROR\13\10
Tue Mar 19 22:14:45 2019 : Modem error; the modem is not responding.
Tue Mar 19 22:14:45 2019 : CCLExit: -6019 (Modem error, modem not responding.)
Tue Mar 19 22:14:45 2019 : Connect script failed

 

could anybody help me?

 

i use com port 8 modem is online

 

 

!GSTATUS: 

Current Time:  1397             Temperature: 34

Reset Counter: 1                Mode:        ONLINE         

System mode:   LTE              PS state:    Attached     

LTE band:      B1               LTE bw:      10 MHz  

LTE Rx chan:   103              LTE Tx chan: 18103

LTE CA state:  NOT ASSIGNED

EMM state:     Registered       Normal Service 

RRC state:     RRC Idle       

IMS reg state: No Srv   

 

PCC RxM RSSI:  -59              RSRP (dBm):  -89

PCC RxD RSSI:  -61              RSRP (dBm):  -89

Tx Power:      0                TAC:         1B6E (7022)

RSRQ (dB):     -11.6            Cell ID:     0313F716 (51640086)

SINR (dB):      1.2

 

Link to comment
Share on other sites

i hate to talk to myself but can somebody point me to the right derection to solve this problem? 

when i connect from terminal with command screen /dev/tty.wwan 115200 and send the command ATD*99# i get error ATA i get no carrier, my modem works in Ubuntu and Windows

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...