acquarius.13 Posted October 24, 2018 Share Posted October 24, 2018 Hi folks, my system in signature is not able to boot anymore. It reboots automatically after a few seconds. At clover bootscreen, I hit space bar and verbose plus debug 0x100 and the result is in the pic attached. I can partially solve only if I boot from another SSD, I replace the EFI folder with a backupped one but at reboot the problem is still there. The system does not boot even without injected. Clover: r4700 Any idea? thanks, Marco Link to comment Share on other sites More sharing options...
acquarius.13 Posted October 24, 2018 Author Share Posted October 24, 2018 I use a piece of brain and I found a good solution: I downgraded to clover r4674 and the related EFI folder so now the system is booting again. Fortunately I keep a copy of some previous clover versions and EFI folders. So now it boots fine. Link to comment Share on other sites More sharing options...
acquarius.13 Posted October 26, 2018 Author Share Posted October 26, 2018 UPDATE: 26/10 System keep rebooting in any case. I didn’t solve anything. I loaded default bios values and then activated uefi boot mode, legacy boot mode, AHCI sata and disabled secure boot. Now I get the deny symbol and I cannot boot can you please give a me an help? Thanks Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted October 26, 2018 Moderators Share Posted October 26, 2018 Make sure you have HFSPlus.efi in drivers64UEFI Link to comment Share on other sites More sharing options...
acquarius.13 Posted October 26, 2018 Author Share Posted October 26, 2018 I have it. Should I update it? Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted October 26, 2018 Administrators Share Posted October 26, 2018 well what exactly happened that it does not boot anymore? mac os update? clover update? driver update? it looks like EAPDFix is having issues detecting audio device and then it stalls at RTC? did you change any patches in clover config? Link to comment Share on other sites More sharing options...
acquarius.13 Posted October 26, 2018 Author Share Posted October 26, 2018 It is caused by clover update (4674-->4700). So, I downgraded to the previous version (4674). Initially worked, but at the next boot the problem came again. I didn't change any patch in clover config. I can post it if needed. EAPDFix is the same version (2.3) and I never changed it. In these days I made a lot of attempts with experimental DSDT (patched by myself with some help) but I performed these experiments in an external SSD. I don't know if this can be the cause Link to comment Share on other sites More sharing options...
acquarius.13 Posted October 26, 2018 Author Share Posted October 26, 2018 I'm attempting many times deleting the EFI folder from EFI partition and replacing it with a backupped one (the oldest is 4458, the newest 4700). Sometimes the system boots correctly, but only once. At reboot it fails again. I was able to boot with EFI folder of r4700 and after hitting F4 and F2 (I remembered the sequence) I was able to generate a complete debug. Hope this can help in finding a solution. Please help me!! Link to comment Share on other sites More sharing options...
viking1304 Posted October 26, 2018 Share Posted October 26, 2018 Jake already told you that your DropTables is not good in another thread. You still have CpuPm instead of CpuSsdt there. Fix that first. Remove AptioMemoryFix.efi from drivers64UEFI. Where that came from? Remove ssdt.aml from your ACPI/patched and do not generate new one. Link to comment Share on other sites More sharing options...
acquarius.13 Posted October 26, 2018 Author Share Posted October 26, 2018 Viking, I applied your suggestions but I got a deny symbol Link to comment Share on other sites More sharing options...
Recommended Posts