philstopford Posted April 1, 2019 Share Posted April 1, 2019 This seems to be a RealTek device, showing under RP01@1C/IOPP/PXSX@0 01:00.0 (null) [ff00]: RealTek Semiconductor Co. Ltd, (null) [10ec:525a] (rev 01) (subsys 1028:07a0) I hunted around and wasn't available to discover an option to enable this, so thought I'd ask just in case. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted April 1, 2019 Moderators Share Posted April 1, 2019 Limited support found here but development seems to have stopped. Link to comment Share on other sites More sharing options...
philstopford Posted April 1, 2019 Author Share Posted April 1, 2019 Hmm. Reports look a little mixed there. Presumably worth a try - thanks. Link to comment Share on other sites More sharing options...
Administrators Hervé Posted April 1, 2019 Administrators Share Posted April 1, 2019 There's nothing else anyway, so... Link to comment Share on other sites More sharing options...
philstopford Posted April 1, 2019 Author Share Posted April 1, 2019 Just to report back. I tried the pre-built kexts and then built the extension from source. The info plist shows the model reported in my machine, but the SD card is not detected, although the extension is loaded in the kernel. That matches some other feedback in the forum and elsewhere, so I guess I'm at an end for now on this part of things. Link to comment Share on other sites More sharing options...
philstopford Posted April 2, 2019 Author Share Posted April 2, 2019 So it suddenly started working today. I built the module from the github source and installed it under both CLOVER/kexts/10.14 and also under /L/E Not sure if both locations were needed. In case it's useful, I could attach the kext here, but I'm not sure if that's against the rules. It's simple enough to pull the github repository and build in Xcode, though. Link to comment Share on other sites More sharing options...
philstopford Posted April 2, 2019 Author Share Posted April 2, 2019 On 4/1/2019 at 9:27 AM, Jake Lo said: Limited support found here but development seems to have stopped. I'm in touch with Philippe. He has suggested that he would be willing to do some contract work on it. I'm trying to find out what that would involve. Just as information. Link to comment Share on other sites More sharing options...
Administrators Hervé Posted April 2, 2019 Administrators Share Posted April 2, 2019 That would normally involve $$$! You ready to pay for his time and efforts? Link to comment Share on other sites More sharing options...
philstopford Posted April 2, 2019 Author Share Posted April 2, 2019 Depends on what it would cost. I'm waiting to see how practical this might be. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted April 3, 2019 Moderators Share Posted April 3, 2019 Can you post the kext you're using? Link to comment Share on other sites More sharing options...
Recommended Posts