james90 Posted April 4, 2019 Share Posted April 4, 2019 Hello. I need your help for my new laptop. The CPU is intel i5-7300U and Video is intel HD 620 Actually I have installed Sierra 10.13.6 Working: Audio (except headphone connector) Video Lan Not working: Touchpad (I can only move the mouse, use some gestures, but no way to click with left or right button) Trackpoint Card Reader Wi-FI (intel chipset, but I'll change a.s.a.p.) Here is my EFI Folder and ioreg. Thanks in advance. ioreg.zip EFI.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted April 5, 2019 Moderators Share Posted April 5, 2019 According to your IOREG, your I2C touchpad should be on TPD1, not TPD0. You'll need to rename it in SSDT-I2C.aml and in the Config file For headphone, your ALC256 requires codecCommander in /L/E and SSDT-ALC256.aml. Card Reader has little to no support. See this thread Link to comment Share on other sites More sharing options...
james90 Posted April 5, 2019 Author Share Posted April 5, 2019 Thanks a lot for your help Jake Lo. I'm not expert, but I tried to rename TPD0 in TDP1 without changes. Please verify the attached file. About headphone I don't understand what I have to do. SSDT-I2C.aml.zip Link to comment Share on other sites More sharing options...
james90 Posted April 9, 2019 Author Share Posted April 9, 2019 @Jake Lo, do you have another solution for this problem? Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted April 9, 2019 Administrators Share Posted April 9, 2019 that was the solution james90. he expects you to try follow his instructions. that's your next step. Link to comment Share on other sites More sharing options...
james90 Posted April 9, 2019 Author Share Posted April 9, 2019 Hi Bronxteck and thanks for your message. I have already tried what suggested by Jake Lo, but without success. My touchpad don't work. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted April 9, 2019 Moderators Share Posted April 9, 2019 Usually touchpad preference won't load if your Battery Status is not working, please confirm. For now try this. Add the *.aml files to Patched folder and replace the Config file, I made a little modification. If audio still not work, you might want to try moving CodecCommander to /L/E Repair permissions and rebuild cache touchpad.zip Link to comment Share on other sites More sharing options...
james90 Posted April 10, 2019 Author Share Posted April 10, 2019 I confirm that battery status don't work. I just tried your config and aml files, but now I can't move the cursor. EFI_After.zip ioreg_after.zip ioreg_before.zip EFI_before.zip Link to comment Share on other sites More sharing options...
james90 Posted April 11, 2019 Author Share Posted April 11, 2019 Please note that audio is working from speaker, but not from the jack connector. Sincerely this isn't important for me. I only need a working touchpad. Thanks for your help. Link to comment Share on other sites More sharing options...
james90 Posted April 17, 2019 Author Share Posted April 17, 2019 Thanks Link to comment Share on other sites More sharing options...
Recommended Posts