carbarmo Posted June 5, 2012 Share Posted June 5, 2012 Please.... help me. I cant believe it, I finally installed Lion 10.7 on my Dell D630, Intel X3100. Still had some problems starting, it was slowly starting, but the keyboard, mouse, video, wireless, worked just perfect. Then I did an upgrade of the CPU, from Intel T7100 to T9300.... Now I cant start Lion again, so I tried make a reinstall but I cant start installation neither If I start with the boot flag -v I see the error "ACPI_SMC_PlatformPlugin::registerLPCDriver - WARNING - LPC device initialization failed: C-state power management not initialized" Plsss, help me. Link to comment Share on other sites More sharing options...
Administrators Syonagar Posted June 6, 2012 Administrators Share Posted June 6, 2012 Dear carbarmo, If you managed to boot up to the line above it means that your boot up went well. Don't worry that is just os x complaining because the AppleIntelCPUManagement.kext is not loaded. It seems to me that your gui is not starting due to graphics issues. But i don't think changing cpu would cause that. Have you tried to boot to other os to check if your system is working fine after the cpu upgrade? Cheers! Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted June 6, 2012 Administrators Share Posted June 6, 2012 also try -v -x and see if maybe it will boot into safe boot Link to comment Share on other sites More sharing options...
carbarmo Posted June 6, 2012 Author Share Posted June 6, 2012 Thanks to Bronxteck and Syonagar. I already tried -v and -x, also tried UserCacheKernel=No and -f. Im gonna do what is Syonagar saying and see if the laptop works perfectly with Windows first. I will tell you later if works. Link to comment Share on other sites More sharing options...
carbarmo Posted June 7, 2012 Author Share Posted June 7, 2012 Hey!!, I just found another DSDT file and it works now, I can proceed with installation, but now I got the message "Still waiting for root device" I already set my HDD to AHCI, turned off USB's, USBBusFix=Yes and No; UseCacheKernel=No and Yes; -v, -x, -f, PCIRootUID=1; rd=disk0s2 (Im sure that is my Lion partition, I only got 1 HD and 1 partition) I will try to install Lion again but in a USB Flash Memory to see what happens. Link to comment Share on other sites More sharing options...
tivimac Posted June 24, 2012 Share Posted June 24, 2012 what other DSDT you´re using? also review the bios because when you change the processor you need A16 at least.... and review your cmos settings because when you change the processor you have to unplug the battery....is possible that you do it change some settings Hey!!, I just found another DSDT file and it works now, I can proceed with installation, but now I got the message "Still waiting for root device" I already set my HDD to AHCI, turned off USB's, USBBusFix=Yes and No; UseCacheKernel=No and Yes; -v, -x, -f, PCIRootUID=1; rd=disk0s2 (Im sure that is my Lion partition, I only got 1 HD and 1 partition) I will try to install Lion again but in a USB Flash Memory to see what happens. Link to comment Share on other sites More sharing options...
elim Posted September 4, 2012 Share Posted September 4, 2012 Anyone successfully got T9300 running Lion? Intel or Nvidia video? Link to comment Share on other sites More sharing options...
tman Posted September 17, 2012 Share Posted September 17, 2012 I believe mine is T9500 and it works fantastic! Link to comment Share on other sites More sharing options...
Administrators Hervé Posted September 17, 2012 Administrators Share Posted September 17, 2012 There's one or two reported T9x00-based D630s in the Benchmarks page. 800MHz FSB Penryn C2D CPUs are supported on the D630, whatever the graphics GPU. Link to comment Share on other sites More sharing options...
Recommended Posts