Baio77 Posted April 18, 2022 Share Posted April 18, 2022 Type C we can improve, but I need more accurate information. I need to know which doors the mentioned door corresponds to. Hackintool can help us. In USB test this EFI , if start ioreg . I added a USB port mapping Kext based on your previous ioregs. Let them know if it works better https://drive.google.com/drive/folders/1OJNZBVTgV0msVZkWzXEe-BLmRvnhKcWX?usp=sharing Link to comment Share on other sites More sharing options...
Ehshan Amin Posted April 21, 2022 Author Share Posted April 21, 2022 Sorry for late reply... I was busy a bit. I will check it out and update status... But there is an issue I am facing... Can't explain it properly... But it's browsing related issues... Some website won't open properly and some time they work perfectly... Especially YouTube or any website having videos(Dailymotion) etc... It's frestrating... Plus YouTube has no 4k support in safari...it was working on previous efi. Some times whole os starts lagging... Is it igpu related issues... Please help. it did not work... New IOReg21april.ioreg.zip Link to comment Share on other sites More sharing options...
tinDell Posted April 23, 2022 Share Posted April 23, 2022 Maybe you should check your graphics memory. If less than 1536 MB, then there is problem with your graphics setting in config.plist. Check at Device Properties > Add. Link to comment Share on other sites More sharing options...
Ehshan Amin Posted April 23, 2022 Author Share Posted April 23, 2022 it has 1536 mb already... Graphics are working but something weird is going on. Sometimes safari is not working properly. Sometimes apps won't load. And laptop heats on idle... Link to comment Share on other sites More sharing options...
Baio77 Posted April 23, 2022 Share Posted April 23, 2022 Your last ioreg is not from my latest efi, there is still UsbinjectAll.kext here, I have changed the kext to UsbMap.kext to improve the USB mapping. I can't do too many variations on 1 EFI otherwise if it doesn't start I don't know where I went wrong. If you help me by trying EFI I will leave you and by answering with Ioreg slowly we will fix everything. Link to comment Share on other sites More sharing options...
Ehshan Amin Posted April 23, 2022 Author Share Posted April 23, 2022 I tried your latest EFI by booting from usb and posted ioreg from it... That EFI didn't work... Link to comment Share on other sites More sharing options...
Baio77 Posted April 23, 2022 Share Posted April 23, 2022 Last Ioreg posted by you : There is no this kext in the latest EFI on Google ,for this I wrote previously. Link to comment Share on other sites More sharing options...
Ehshan Amin Posted April 23, 2022 Author Share Posted April 23, 2022 after booting your latest EFI on system efi partition I got this... now if I connect my external hdd through type c in won't even blink led... IOreg23april.ioreg Link to comment Share on other sites More sharing options...
Baio77 Posted April 25, 2022 Share Posted April 25, 2022 In my USB mapping SS03 is set as Type C, but I think that's incorrect. I believe you have the Type Cs connected in the TB3 ports. Check if you see a lightning bolt drawn next to the Type C port. In this case the Type C works if you activate the TB3s via the specific SSDT, but you would probably carry with you the known sleep \ wake problems Link to comment Share on other sites More sharing options...
Ehshan Amin Posted April 25, 2022 Author Share Posted April 25, 2022 It has both TB3 fully working ports... Now what is the procedure of activating those ports... Link to comment Share on other sites More sharing options...
Recommended Posts