Andres Galeano Posted February 15, 2023 Author Share Posted February 15, 2023 I don't feel like anything has changed but it sure gives you better performance. Here I attach EFI Folder. we will continue working on its performance I have noticed that there are times when the SHUTDOWN or RESET does not work. It just stays on black screen. I had found a possible solution with hackingtool fix hinbernate and it didn't work. Link to comment Share on other sites More sharing options...
Andres Galeano Posted February 18, 2023 Author Share Posted February 18, 2023 MacBook Pro de Andres Galeano Ventura Done.ioreg Link to comment Share on other sites More sharing options...
Andres Galeano Posted February 22, 2023 Author Share Posted February 22, 2023 Does anyone know why I am not receiving macOS updates? Link to comment Share on other sites More sharing options...
Administrators Hervé Posted February 22, 2023 Administrators Share Posted February 22, 2023 It was mentioned on p1 but macOS OTA updates require that your booted system complies with a set of pre-requisites: SMBIOS of a fully supported Mac model (unsupported models will not attract updates) no -no_compat_check boot arg no Apple_Internal SIP flag enabled (5th bit of csr_active_config parameter). See our SIP-related FAQ topic for details These apply to systems using Clover. For systems using OpenCore, I vaguely remember that there's another pre-requisite around SecureBootModel or something of that essence; you'll have to look that up. You may therefore need to have 2 x configs at hand to be able to obtain and install Ventura updates on your unsupported platform: your current config and a specific "supported model" config (eg: MBP14,1 SMBIOS, no -no_compat_check, SIP=0xFEF) that you'll use exclusively for updates. Given that you're running Ventura on a Haswell Latitude E5440 with HD4400 graphics, you used OCLP patching to apply root patching and gain graphics acceleration. Make sure the option you selected/unselected in the tool do not prevent OTA updates. Check out the tool's documentation. On a real Mac, default parameter for the targeted system do support OTA updates, but that's real Mac... Link to comment Share on other sites More sharing options...
Andres Galeano Posted March 1, 2023 Author Share Posted March 1, 2023 Excellent and I have done a lot of research and I have succeeded, thank you very much for the help of all involved. As always I attach all the necessary files along with a screenshot. We will continue to optimize the EFI. Files EFI Folder MacBook Pro 14,1 Andres Galeano.ioreg Link to comment Share on other sites More sharing options...
Baio77 Posted March 1, 2023 Share Posted March 1, 2023 EFI OC 0.9.0 use OCAT to manage the Config.plist. https://drive.google.com/drive/folders/1Nliw3lj72TqhUx9I_Xe87aouJQJCxE5A?usp=share_link Try this EFI, Corrections: Fix SSDT PNLF Add Kext SDReader Fixed Kext USBPort not loading as it is done with SMBios Macbookpro 11.4 Removed Useless Kexts ECEnable is not needed on DELLs, it should still see the battery PciRoot(0x0)/Pci(0x3,0x0) is wrong contains strings for IGPU. Test in USB if start ioreg. I advise you to compare each section of the config because I changed various things. Link to comment Share on other sites More sharing options...
Andres Galeano Posted March 12, 2023 Author Share Posted March 12, 2023 Hi, how are you? I am just catching up with these topics. I have seen the EFI folder sent by @Baio77 and I have seen the corrections and I found them very good. One issue that needs to be corrected in the EFI that I'm currently using is the issue of shutdown, I can't get it to turn OFF correctly. It simulates a shutdown since it makes all the transitions but the screen remains black but it does not turn OFF and there is still movement and operation in the hardware. I hope you can help me as I think it would be the last thing to achieve maximum performance in the Hackintosh. USB issue when plugged into the USB on the back edge below the screen everything freezes. At the moment these are the only problems encountered. MacBook Pro de Andres 12-03-23.ioreg Link to comment Share on other sites More sharing options...
Administrators Hervé Posted March 12, 2023 Administrators Share Posted March 12, 2023 IOReg is unlikely to be of any use for that shutdown problem; a zipped copy of the bootloader's EFI you're using would be much more useful... As far as running Ventura on those unsupported platforms is concerned, you should: re-use what you had under Big Sur/Monterey (assuming everything worked Ok under macOS 11/12, including shutdown) update all your add-on kexts to latest versions (especially Lilu & PlugIns) use the SMBIOS of a MBP model supported under Ventura (eg: MBP14,1) for initial installation (and OTA updates) revert to Haswell SMBIOS and boot with -no_compat_check boot arg post-install apply OCLP root patching (use OCLP v0.6.1 minimum) after booting with Haswell settings for the 1st time and that's it. Has worked perfectly for my Ivy Bridge E6230, so it should too on your Haswell E5440. I'd say your shutdown issues are related to some patched ACPI tables or ACPI patches you use. Link to comment Share on other sites More sharing options...
Andres Galeano Posted March 13, 2023 Author Share Posted March 13, 2023 Excellent you are right. I will upload the EFI and then anchor it here. And we'll see what we can do. So far so good, except for those two little problems. Link to comment Share on other sites More sharing options...
Andres Galeano Posted March 14, 2023 Author Share Posted March 14, 2023 Link Folder EFI Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now