vanquybn Posted May 28, 2023 Share Posted May 28, 2023 Hello, My internal LCD: 15.6", UHD 3840x2160, 60Hz, Anti-Glare, Non-Touch, 500 Nits. What I have tried: - with or without SSDT PNLF - with or without OC boot arguments - all the ig-platform-id for CometLake/IceLake for each SMBIOS MBP16.3 and MBP16.4 The brightness bar appears but brightness cannot be adjusted. Can you advise? Please see my images attached. EFI.zip 7550-ACPI-FROM-LINUX.zip MacBookPro.ioreg.zip Link to comment Share on other sites More sharing options...
Baio77 Posted May 28, 2023 Share Posted May 28, 2023 https://drive.google.com/drive/folders/1bttb_aHUCHJb7_asDMIMQuL4l3P7kFBQ?usp=sharing If start ioreg my EFI . I looked for info , I guess you are talking about your Dell Precision 7550 , test the EFI I passed you , updated OC 0.9.2 + kext , I modified some SSDT , see I2C and I added others respecting the SMBios used (MacbookPro 16.4 the most suitable , see CPU characteristics , https://www.intel.it/content/www/it/it/products/sku/201897/intel-core-i710850h-processor-12m-cache-up-to-5-10-ghz/specifications.html ) Link to comment Share on other sites More sharing options...
Administrators Hervé Posted May 28, 2023 Administrators Share Posted May 28, 2023 What system is this? What iGPU? Are you referring to the Precision 7550 listed in your signature? Screenshots are next to useless, what you need to post are zipped copies of bootloader's EFI folder and IOReg. Copy of saved SysInfo always useful too. Also, you mentioned OC boot arguments but forgot to specify them so that's not useful neither. Please be specific if you want proper assistance. Ice Lake video settings would be useless too since they apply ICL platforms with Iris Plus graphics. Comet Lake graphics are fully supported with Coffee Lake (CFL) drivers. For references, I suggest you consult our dedicated thread about supported graphics available in our Technical Info forum section and the WhateverGreen user manual. In all likelyhood, you use incorrect CML settings and/or an unsuitable SSDF-PNLF table. Impossible to say more until you post the required troubleshooting material. Link to comment Share on other sites More sharing options...
vanquybn Posted May 28, 2023 Author Share Posted May 28, 2023 @Hervé Thank you for your reply, Yes it is Precision 7550, I have just updated the post #1. Please have a look. @Baio77 Thank you for your advise. It is not start. Please have a look my EFI and IOReg at post 1. Link to comment Share on other sites More sharing options...
Administrators Hervé Posted May 29, 2023 Administrators Share Posted May 29, 2023 @vanquybn woaw, what a set of patched ACPI tables! Are you sure you need all of those? Anyway, I'm tempted to say your issue could be related to conflicting ACPI info for your CML UHD630 iGPU. In IOReg, we can clearly see it registers against ACPI device "IGPU" but you inject at least 2 tables that keep referring to ACPI device called "GFX0". If you look at your PNLF device in IOReg, you'll see that its ACPI path refers to "IOACPIPlane:/_SB/PCI0@0/GFX0@20000/PNLF@0": Now, You're gonna say "so does my IGPU device in IOReg": I do things quite differently on my Hackintosh laptops and: rename iGPU device "GFX0" to "IGPU" in my Clover configs; I think you should do the same in your OC config. use a SSDT-PNLF patched table that refers to PCI0.IGPU and PCI0.IGPU.PNLF, not to GFX0 in any way. I think you should do the same in your SSDT-PNLF & SSDT-GFX0 patched tables. Bu I must say that I don't quite understand why you use the latter; it injects stuff you got in your OC config and it probably causes conflicts too. Here's my E7270 IGPU and PNLF IOReg data in comparison: At present, iGPU device appears under the name of IGPU but that's probably just renamed by WhateverGreen. I would suggest you apply the above 2 suggestions and disable that SSDT-GFX0 table of yours. Where did you obtain your OC EFI folder from? Or did you make it yourself? 1 Link to comment Share on other sites More sharing options...
vanquybn Posted May 29, 2023 Author Share Posted May 29, 2023 I have just add rename to OC and SSDT-PNLF, the devices appear as your laptop (you can see in IOReg attached below), but Brightness control still not working. About EFI folder question: Yes, I made it myself but the SSDT I copied from Dell Precision 7650, it almost same as 7550 except the cpu. I also tried a clean EFI with all SSDT and config option described in Dortania guide, and Brightness does not work: https://dortania.github.io/OpenCore-Install-Guide/config-laptop.plist/coffee-lake-plus.html#acpi IOReg20230529.zip Link to comment Share on other sites More sharing options...
Baio77 Posted May 29, 2023 Share Posted May 29, 2023 https://drive.google.com/drive/folders/1i60022WsXWFj9te7OyWMvh1C4RBjcVPb?usp=sharing test this , ioreg if start 1 Link to comment Share on other sites More sharing options...
Administrators Hervé Posted May 29, 2023 Administrators Share Posted May 29, 2023 @vanquybn you inject a screen's EDID. Is it that of your screen? Did you find you needed it or else black/corrupt screen? Link to comment Share on other sites More sharing options...
vanquybn Posted May 30, 2023 Author Share Posted May 30, 2023 @Baio77 it start, Brightness does not work, Trackpad very lag/slowly. Please see my attached IOReg below. @Hervé Yes, it is my screen's EDID. My Hack works well with/without it. IOReg20230530.zip 1 Link to comment Share on other sites More sharing options...
THEPCCLINIC Posted July 27, 2023 Share Posted July 27, 2023 Need EFI Working One Please Share it Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now