AppleHDA Binary Patching

[terramir]

I figured someone can see if I screwed up, I took her patch and applied it to the newest appleHDA.kext here is my dump 

terramir

 

codec_dump.txt

[jamzmoby]

Hi i have a problem with my AppleHDA kext with the patching. I've followed this guide and thought i had it sorted but i can't get my device to display any outputs or inputs in the system preference pane. The codec was extracted using Linux live cd and is ALC269. 

My machine is a desktop all in one pc so basically a laptop without a keyboard.

I've tried out voodoohda and that works so i know that my speakers and headphones are working.

I've enclosed IOREG from the patched kext that i done and from voodohda , also my DSDT with layout 28 the same as my patched hda kext. Also and original mavericks AppleHDA.kext ubpatched and anything i think mite be relevant to somebody helping me out to find where i,ve gone wrong.

 

Thanks in advance.

Archive.zip

[sheriff777]

Sir help me please. I tried everything may be i doing something wrong, but i am losing hope.

Sir if you have a time, please patch my kext. 

My laptop is  samsungnp300e5v  

cpu is: Intel Core i3 3120M

Intel HD4000

 my MacOS: El Captain 10.11.3

 

 I have all necessary files for patch.

My files is here:  folder.zip

 

I will be very grateful for the help.

Thank in advance!

 

[Sumit]

i patched AppleHDA for mY LenovoG570 , intel core i5 

codec : CX20590 

 

 

i did everything my my internal and external mic not working will you please help me.

i attached a codec Dump will you please patch for me 

CodecDump-1.zip

[NewDaigo]

Dear all,

 

Could use some help trying to patch AppleHDA for my ALC236.

I've followed the guide (results, except binary attached). The only deviation is that I'm injecting the layout id via my config.plist, instead of adding to the DSDT file.

 

Not sure if that would be the issue, but when I use AppleHDA patcher, I do not change DSDT as well, just the full patched AppleHDA.kext. This gives me sound on speakers, headphones and my internal mic is working, only my headphone mic (via jack) isn't. Hence my attempt to patch myself.

 

Many thanks in advance for any input you're able to provide!

ALC236.zip

codec_dump.txt

[zhang88zh]

please help:
asus   ux410uq nb：i5 7200u  4G
Mobile 6th/7th Generation Intel® Processor Family I/O PCI Express Root Port #1 - 9D10

 
sound car:  Conexant SmartAudio HD
hard ID : HDAUDIO\FUNC_01&VEN_14F1&DEV_1F72&SUBSYS_10431530
CODEC durm from ubuntu：
 
please help pach  APPLEhda      mac os 10.12.3
THS
 

Codec: Conexant Generic
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x14f11f72
Subsystem Id: 0x10431530
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
  Power states:  D0 D1 D2 D3 D3cold S3D3cold CLKSTOP EPSS
  Power: setting=D0, actual=D0
GPIO: io=3, o=0, i=0, unsolicited=1, wake=0
  IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
  Control: name="Headphone Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Control: name="Headphone Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Device: name="Generic Analog", type="Audio", device=0
  Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
  Amp-Out vals:  [0x36 0x36]
  Converter: stream=8, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xa]: 16 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
  Control: name="Speaker Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Control: name="Speaker Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
  Amp-Out vals:  [0x80 0x80]
  Converter: stream=8, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xa]: 16 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x12 [beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
  Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0
  Amp-Out vals:  [0x06]
Node 0x13 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
  Control: name="Capture Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Control: name="Capture Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Device: name="Generic Analog", type="Audio", device=0
  Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
  Amp-In vals:  [0x80 0x80] [0x50 0x50] [0x50 0x50]
  Converter: stream=1, channel=0
  SDI-Select: 0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xa]: 16 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 3
     0x18 0x1a 0x19*
Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
  Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
  Amp-In vals:  [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xa]: 16 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 3
     0x19 0x1a 0x15*
Node 0x15 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
  Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
  Amp-In vals:  [0x4a 0x4a] [0x4a 0x4a]
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
     0x10 0x11
Node 0x16 [Pin Complex] wcaps 0x400581: Stereo
  Pincap 0x0001001c: OUT HP EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x03211040: [Jack] HP Out at Ext Left
    Conn = 1/8, Color = Black
    DefAssociation = 0x4, Sequence = 0x0
  Pin-ctls: 0xc0: OUT HP
  Unsolicited: tag=01, enabled=1
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
     0x10* 0x11
Node 0x17 [Pin Complex] wcaps 0x400501: Stereo
  Pincap 0x00010010: OUT EAPD
  EAPD 0x0:
  Pin Default 0x90170110: [Fixed] Speaker at Int N/A
    Conn = Analog, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
     0x10 0x11*
Node 0x18 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00001124: IN Detect
    Vref caps: HIZ 80
  Pin Default 0x40f001f0: [N/A] Other at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x00: VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
  Control: name="Mic Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00001124: IN Detect
    Vref caps: HIZ 80
  Pin Default 0x03a11030: [Jack] Mic at Ext Left
    Conn = 1/8, Color = Black
    DefAssociation = 0x3, Sequence = 0x0
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=02, enabled=1
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x1a [Pin Complex] wcaps 0x40048b: Stereo Amp-In
  Control: name="Internal Mic Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00000020: IN
  Pin Default 0x95a60120: [Fixed] Mic at Int Top
    Conn = Digital, Color = Unknown
    DefAssociation = 0x2, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x1b [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono

 

Codec.txt

[vinicius_sampaio]

Hi!

Can anybody help me? I'm just missing my audio device, which does not want to work.

 

My linux device dump attached and my dsdt too.

Tanks.

codec_dump.txt

dsdtACER.aml.zip

[RikiyaHatake]

Hi, i need help to patch my AppleHDA. At Patching AppleHDA Kext part, there is no Config Data and Layout ID in item 0, but there is in item 3. Should I add to item 0 or edit item 3?

And i'm using layout 1, so instead of change the dsdt value from '1c' to '0c', i should change it to '01' right?

Thanks

[rachanta]

Hi. Is this thread alive? I have tried to repeat the whole process for ALC225 on a Dell Latitude E5280, i5-7200U HD620 Kabylake notebook. No devices. I can post my problem-report files.

[Jake Lo]

@rachanta

You can post your request here. Make sure to include all files requested

Have you tried AppleALC.kext + Lilu.kext with layout 28, 30 or 33?