oneill Posted February 7, 2013 Author Share Posted February 7, 2013 I managed to fix this also by installing the BroadCom...Family.kext to /Extra/Extensions and running edp again. Otherwise the trackpad does not work. Thank you very much for all your help, Olsen Link to comment Share on other sites More sharing options...
Administrators Leon Posted February 7, 2013 Administrators Share Posted February 7, 2013 Hey,Can you zip your /Extra and add it here.. i want to run a compare against latest EDP Link to comment Share on other sites More sharing options...
oneill Posted February 7, 2013 Author Share Posted February 7, 2013 Here it is. Everything is working ok: trackpad, screen, wifi (using a broadcom card) on a Dell D820 with 10.6.8. The only thing which still might cause a pb is that sometimes the screen goes blank when the screensaver should start and does not starts again. For now I solved this by disabling the screensaver/energy saving. Regards, Olsen Extra.zip Link to comment Share on other sites More sharing options...
Administrators Leon Posted February 7, 2013 Administrators Share Posted February 7, 2013 And would you mind posting your HW also.. eg graphic card, cpu type etc.Thank you Link to comment Share on other sites More sharing options...
oneill Posted February 7, 2013 Author Share Posted February 7, 2013 Here it is: 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 01) 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 01:00.0 VGA compatible controller: nVidia Corporation G72M [GeForce Go 7400] (rev a1) 03:01.0 CardBus bridge: O2 Micro, Inc. Cardbus bridge (rev 21) 03:01.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express (rev 02) 0c:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) Link to comment Share on other sites More sharing options...
hfs3 Posted February 8, 2013 Share Posted February 8, 2013 I'm facing the same problem.Even after a new installation and using an old Extra-folder (Version 4), the internal screen was black. External Screen was working. As a work around, I'm using the D620 NVS configuration right now (see https://osxlatitude.com/index.php?/topic/2102-d820-lion-black-screen-nvs110/) That's what I did. Seems to be working pretty well, but it would be nice to have the D820 files corrected. Link to comment Share on other sites More sharing options...
Chris Thomson Posted February 23, 2013 Share Posted February 23, 2013 Hi there I have a Dell D820 with the NV120 graphics processor. After updating to EDP5 I am also experiencing the black screen issue. Interestingly when my laptop boots up I am getting the console text that you would expect to see if I have used the -v option in Chameleon. I have tried deleting the Extra folder and re-installing EDP but I still get the black screen. My laptop details are as follows Model: Dell Latitude D820 Processor: Intel T7200 RAM: 3GB Graphics: Nvidia NV120 256Mb Storage: 120Gb SSD WiFi: Dell Bluetooth BIOS - Custom OSXLatitude D820 (Nvidia) BIOS Operating System: OS X 10.7.5 Does anybody have any suggestions as to what I should be looking at to resolve this. At the moment I can work around it by using my USB stick to boot the laptop. Thanks Chris Link to comment Share on other sites More sharing options...
Chris Thomson Posted February 26, 2013 Share Posted February 26, 2013 Hi Everyone Following on from my last post, I have tried rebuilding my /Extra folder using the D620 profile as someone else had tried earlier in this post and found that the display did come on at the logon screen but for what ever reason the keyboard doesn't work (caps lock does but nothing else seems to work) and therefore I cannot get logged on. Has anyone else had this issue? Thanks Chris Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted February 27, 2013 Administrators Share Posted February 27, 2013 have you connected a usb keyboard so you can log on? also which d620 model did you use? d620 nvidia? Link to comment Share on other sites More sharing options...
Chris Thomson Posted February 28, 2013 Share Posted February 28, 2013 I didn't try a usb keyboard - for some reason I didn't even think about that I will give it a try again as I've still got the 620 /Extra folder in place at the moment. Yes I used the D620 NVidia configuration. I will let you know how I get on with a USB keyboard plugged in. Link to comment Share on other sites More sharing options...
Recommended Posts