unbewusstsein Posted June 16, 2013 Share Posted June 16, 2013 First, unfortunately, I've downloaded yesterday "OS X Mountain Lion Installer" and it is a 10.8.4 version. then, I've used myHack to burn an USB stick with adding Extra_D620i_LoRes_ML. after installation, i had the warning saying installation failed however restarting in Mountain Lion is OK. except two important thinks : - no ethernet detected ; - no audio input/output. Then, i can't use PostFactor. Here is my '/Extra' folder : d620:~ yt$ ls -l /Extra total 64 -rwxrwxrwx 1 root wheel 21045 28 jan 03:23 DSDT.aml drwxrwxrwx 14 root wheel 476 16 jui 02:07 Extensions drwxrwxrwx 5 root wheel 170 15 jui 23:35 RemovedExtensions drwxrwxrwx 3 root wheel 102 15 avr 11:31 Themes -rwxrwxrwx 1 root wheel 907 16 jui 01:33 org.chameleon.Boot.plist -rwxrwxrwx 1 root wheel 843 28 jan 03:23 smbios.plist Here is my '/Extra/Extensions' folder : d620:~ yt$ ls -l /Extra/Extensions total 0 drwxr-xr-x 3 root wheel 102 15 avr 11:31 AppleACPIPS2Nub.kext drwxr-xr-x 3 root wheel 102 15 avr 11:31 AppleACPIPlatform.kext drwxr-xr-x 3 root wheel 102 28 jan 03:23 AppleBCM5751Ethernet.kext drwxr-xr-x 4 root wheel 136 24 mar 13:08 AppleIntelIntegratedFramebuffer.kext drwxr-xr-x 3 root wheel 102 15 avr 11:31 ApplePS2Controller.kext drwxr-xr-x 3 root wheel 102 15 avr 11:31 FakeSMC.kext drwxr-xr-x 3 root wheel 102 20 fév 15:02 IONetworkingFamily.kext drwxr-xr-x 3 root wheel 102 15 avr 11:31 OSvKernDSPLib.kext drwxr-xr-x 3 root wheel 102 15 avr 11:31 Patched_10.7_AppleRTC.kext drwxr-xr-x 3 root wheel 102 15 avr 11:31 VoodooTSCSync.kext drwxr-xr-x 3 root wheel 102 18 aoû 2009 lspcidrv.kext notice I've added manually "IONetworkingFamily.kext" and ran myHack/fix afterwards, nothing more. i thing it is encouraging, then i need to know the kexts i dove have to install to get, at first, ethernet. Other datas : Dell Wireless 1395 : Nom: pci8086,4222 Type: Airport Gestionnaire installé: Non MSI: Non Bus: PCI Logement: PCI Slot 2 Identifiant du fournisseur: 0x8086 Identifiant du périphérique: 0x4222 Identifiant du fournisseur du sous-système: 0x8086 Identifiant du sous-système: 0x1021 Identifiant de révision: 0x0002 Largeur du câble: x1 Vitesse de la liaison: 2.5 GT/s GMA 950 : Nom: display Type: Contrôleur du moniteur Gestionnaire installé: Oui MSI: Non Bus: PCI Logement: Built in Identifiant du fournisseur: 0x8086 Identifiant du périphérique: 0x27a2 Identifiant du fournisseur du sous-système: 0x1028 Identifiant du sous-système: 0x01c2 Identifiant de révision: 0x0003 Version du système: OS X 10.8.4 (12E55) Version du noyau: Darwin 12.4.0 Volume de démarrage: HD Mode de démarrage: Normal Nom de l’ordinateur: d620 Nom de l’utilisateur: Yvon Thoraval (yt) Mémoire virtuelle sécurisée: activée Temps depuis le démarrage: 31 minutes Link to comment Share on other sites More sharing options...
unbewusstsein Posted June 16, 2013 Author Share Posted June 16, 2013 I got Ethernet woking using : BCM5722D.kext found at osx86.net and taking the right ziped file : 3605-ML_BCM5722D.kext.zip now i do have to get back sound working as i had on Snow Leopard, same d620. i remember more or less i had to install some Voodo right into "/System/Library/Extensions" Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted June 17, 2013 Administrators Share Posted June 17, 2013 ummm... you used the boot pack... to finish your install you where supposed to run edp and build for your machine. it's all here http://www.osxlatitude.com/edp/documentation/ only one more click away from where you got the bootpack. please be more thourough. Link to comment Share on other sites More sharing options...
Administrators Hervé Posted June 17, 2013 Administrators Share Posted June 17, 2013 I probably need to review my guides for 10.8.4, something I have not done yet, but remember that you need to apply MLPF v0.3 to support 10.8.4. I understand v0.22 does not. I'm surprised you have no Ethernet with the BCM5751 kext as that is the kext required to support the built-in Ethernet of the D620; the BCM5722D is usually for the built-in Ethernet fitted to the D630/D830. Maybe you could provide the lspci info for that particular hardware too so that we clarify this point. I take it that, without Ethernet, you never managed to install EDP and make a system build. This would explain why you do not have sound as that is only supported by kexts installed at EDP System Build (the bootpack only contains essential kexts). NB: note that your DW1395 will only support Clear or WEP wireless networks under 10.8.4 (AES is unsupported)... 1 Link to comment Share on other sites More sharing options...
unbewusstsein Posted June 18, 2013 Author Share Posted June 18, 2013 ummm... you used the boot pack... to finish your install you where supposed to run edp and build for your machine. it's all here http://www.osxlatitude.com/edp/documentation/ only one more click away from where you got the bootpack. please be more thourough. yes but, edp, afaik, needs internet connection, i didn't have one a the first boot. Link to comment Share on other sites More sharing options...
unbewusstsein Posted June 18, 2013 Author Share Posted June 18, 2013 I probably need to review my guides for 10.8.4, something I have not done yet, but remember that you need to apply MLPF v0.3 to support 10.8.4. I understand v0.22 does not. I'm surprised you have no Ethernet with the BCM5751 kext as that is the kext required to support the built-in Ethernet of the D620; the BCM5722D is usually for the built-in Ethernet fitted to the D630/D830. Maybe you could provide the lspci info for that particular hardware too so that we clarify this point. I take it that, without Ethernet, you never managed to install EDP and make a system build. This would explain why you do not have sound as that is only supported by kexts installed at EDP System Build (the bootpack only contains essential kexts). NB: note that your DW1395 will only support Clear or WEP wireless networks under 10.8.4 (AES is unsupported)... OK, fine thanks, here are datas about my ethernet card : description: Ethernet interface product: NetXtreme BCM5752 Gigabit Ethernet PCI Express vendor: Broadcom Corporation Link to comment Share on other sites More sharing options...
Administrators Hervé Posted June 18, 2013 Administrators Share Posted June 18, 2013 How about PCI ids (Vendor + Device)? Link to comment Share on other sites More sharing options...
unbewusstsein Posted June 20, 2013 Author Share Posted June 20, 2013 How about PCI ids (Vendor + Device)? all the datas i have about this "" Ethernet card : id: network description: Ethernet interface product: NetXtreme BCM5752 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 02 serial: 00:18:8b:b0:66:24 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation = on broadcast = yes driver = tg3 driverversion = 3.119 firmware = 5752-v3.19 latency = 0 link = no multicast = yes port = twisted pair resources: irq : 45 memory : efcf0000-efcfffff Link to comment Share on other sites More sharing options...
Recommended Posts