Jump to content
Sign in to follow this  
unbewusstsein

Dell D620 GMA950 Mountain Lion 10.8.4 install -> no ethernet and sound

Recommended Posts

First, unfortunately, I've downloaded yesterday "OS X Mountain Lion Installer" and it is a 10.8.4 version.

 

then, I've used myHack to burn an USB stick with adding Extra_D620i_LoRes_ML.

 

after installation, i had the warning saying installation failed however restarting in Mountain Lion is OK.

 

except two important thinks :

- no ethernet detected ;

- no audio input/output.

 

Then, i can't use PostFactor.

 

Here is my '/Extra' folder :

 

 

d620:~ yt$ ls -l /Extra
total 64
-rwxrwxrwx   1 root  wheel  21045 28 jan 03:23 DSDT.aml
drwxrwxrwx  14 root  wheel    476 16 jui 02:07 Extensions
drwxrwxrwx   5 root  wheel    170 15 jui 23:35 RemovedExtensions
drwxrwxrwx   3 root  wheel    102 15 avr 11:31 Themes
-rwxrwxrwx   1 root  wheel    907 16 jui 01:33 org.chameleon.Boot.plist
-rwxrwxrwx   1 root  wheel    843 28 jan 03:23 smbios.plist
 
Here is my '/Extra/Extensions'

 

folder :

 

d620:~ yt$ ls -l /Extra/Extensions
total 0
drwxr-xr-x  3 root  wheel  102 15 avr 11:31 AppleACPIPS2Nub.kext
drwxr-xr-x  3 root  wheel  102 15 avr 11:31 AppleACPIPlatform.kext
drwxr-xr-x  3 root  wheel  102 28 jan 03:23 AppleBCM5751Ethernet.kext
drwxr-xr-x  4 root  wheel  136 24 mar 13:08 AppleIntelIntegratedFramebuffer.kext
drwxr-xr-x  3 root  wheel  102 15 avr 11:31 ApplePS2Controller.kext
drwxr-xr-x  3 root  wheel  102 15 avr 11:31 FakeSMC.kext
drwxr-xr-x  3 root  wheel  102 20 fév 15:02 IONetworkingFamily.kext
drwxr-xr-x  3 root  wheel  102 15 avr 11:31 OSvKernDSPLib.kext
drwxr-xr-x  3 root  wheel  102 15 avr 11:31 Patched_10.7_AppleRTC.kext
drwxr-xr-x  3 root  wheel  102 15 avr 11:31 VoodooTSCSync.kext
drwxr-xr-x  3 root  wheel  102 18 aoû  2009 lspcidrv.kext
 

notice I've added manually "IONetworkingFamily.kext" and ran myHack/fix afterwards, nothing more.

 

i thing it is encouraging, then i need to know the kexts i dove have to install to get, at first, ethernet.

 

Other datas :

 

 

Dell Wireless 1395 :


  Nom: pci8086,4222
  Type: Airport
  Gestionnaire installé: Non
  MSI: Non
  Bus: PCI
  Logement: PCI Slot 2
  Identifiant du fournisseur: 0x8086
  Identifiant du périphérique: 0x4222
  Identifiant du fournisseur du sous-système: 0x8086
  Identifiant du sous-système: 0x1021
  Identifiant de révision: 0x0002
  Largeur du câble: x1
  Vitesse de la liaison: 2.5 GT/s
 
GMA 950 :


  Nom: display
  Type: Contrôleur du moniteur
  Gestionnaire installé: Oui
  MSI: Non
  Bus: PCI
  Logement: Built in
  Identifiant du fournisseur: 0x8086
  Identifiant du périphérique: 0x27a2
  Identifiant du fournisseur du sous-système: 0x1028
  Identifiant du sous-système: 0x01c2
  Identifiant de révision: 0x0003
 
 
 
Version du système: OS X 10.8.4 (12E55)
  Version du noyau: Darwin 12.4.0
  Volume de démarrage: HD
  Mode de démarrage: Normal
  Nom de l’ordinateur: d620
  Nom de l’utilisateur: Yvon Thoraval (yt)
  Mémoire virtuelle sécurisée: activée
  Temps depuis le démarrage: 31 minutes
 

 

Share this post


Link to post
Share on other sites

I got Ethernet woking using :

BCM5722D.kext

found at osx86.net

and taking the right ziped file :

3605-ML_BCM5722D.kext.zip

 

now i do have to get back sound working as i had on Snow Leopard, same d620.

 

i remember more or less i had to install some Voodo right into "/System/Library/Extensions" 

Share this post


Link to post
Share on other sites

I probably need to review my guides for 10.8.4, something I have not done yet, but remember that you need to apply MLPF v0.3 to support 10.8.4. I understand v0.22 does not.

 

I'm surprised you have no Ethernet with the BCM5751 kext as that is the kext required to support the built-in Ethernet of the D620; the BCM5722D is usually for the built-in Ethernet fitted to the D630/D830. Maybe you could provide the lspci info for that particular hardware too so that we clarify this point.

 

I take it that, without Ethernet, you never managed to install EDP and make a system build. This would explain why you do not have sound as that is only supported by kexts installed at EDP System Build (the bootpack only contains essential kexts).

 

NB: note that your DW1395 will only support Clear or WEP wireless networks under 10.8.4 (AES is unsupported)...

  • Like 1

Share this post


Link to post
Share on other sites

ummm... you used the boot pack... to finish your install you where supposed to run edp and build for your machine. it's all here http://www.osxlatitude.com/edp/documentation/ only one more click away from where you got the bootpack. please be more thourough.

 

yes but, edp, afaik, needs internet connection, i didn't have one a the first boot.

Share this post


Link to post
Share on other sites

I probably need to review my guides for 10.8.4, something I have not done yet, but remember that you need to apply MLPF v0.3 to support 10.8.4. I understand v0.22 does not.

 

I'm surprised you have no Ethernet with the BCM5751 kext as that is the kext required to support the built-in Ethernet of the D620; the BCM5722D is usually for the built-in Ethernet fitted to the D630/D830. Maybe you could provide the lspci info for that particular hardware too so that we clarify this point.

 

I take it that, without Ethernet, you never managed to install EDP and make a system build. This would explain why you do not have sound as that is only supported by kexts installed at EDP System Build (the bootpack only contains essential kexts).

 

NB: note that your DW1395 will only support Clear or WEP wireless networks under 10.8.4 (AES is unsupported)...

 

OK, fine thanks, here are datas about my ethernet card :

 

description: Ethernet interface product: NetXtreme BCM5752 Gigabit Ethernet PCI Express vendor: Broadcom Corporation

Share this post


Link to post
Share on other sites

How about PCI ids (Vendor + Device)?

 

all the datas i have about this "" Ethernet card :

 

id: 
network
description: Ethernet interface
product: NetXtreme BCM5752 Gigabit Ethernet PCI Express
vendor: Broadcom Corporation
physical id: 
0
bus info: 
pci@0000:09:00.0
logical name: 
eth0
version: 02
serial: 00:18:8b:b0:66:24
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: 
autonegotiation = on
broadcast = yes
driver = tg3
driverversion = 3.119
firmware = 5752-v3.19
latency = 0
link = no
multicast = yes
port = twisted pair
resources: 
irq : 45
memory : efcf0000-efcfffff

Share this post


Link to post
Share on other sites
Sign in to follow this  

×
×
  • Create New...