Jump to content
EMlyDinEsH

Bluetooth Firmware Uploader

Recommended Posts

Not working on mine..

I got this:

 

BTFirmwareUploader(0xffffff80074c5000)::start - failed to write firmware to bulk pipe (65)

 

I'm using v1.5, my card is AR9485+AR3012, PID: 3362, VID: 13D3, Half-mini PCIe

 

AR3012 is not working with my kext very well so i would like to experiment on this to support and i need beta testers. If you would like to be beta tester then PM me.

  • Like 1

Share this post


Link to post
Share on other sites

Hi,

 

just a little help for me. I have the Azureware BCM94352HMB and in system report on USB i have this :

Broadcom USB Bluetooth 4.0 Controller:
 
  Product ID: 0x3404
  Vendor ID: 0x13d3  (AzureWave Technologies, Inc.)
  Version:  1.12
  Serial Number: 240A649F6C7B
  Speed: Up to 12 Mb/sec
  Manufacturer: Broadcom Corp
  Location ID: 0x14b00000 / 6
  Current Available (mA): 500
  Current Required (mA): 0

the wifi rocks fine with the "toledaARPT.kext" but bluetooth doesn't work, so i've downloaded from here the "BTFirmwareUploader.kext" and edited in this mode :

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>BuildMachineOSBuild</key>
<string>12F37</string>
<key>CFBundleDevelopmentRegion</key>
<string>it_IT</string>
<key>CFBundleExecutable</key>
<string>BTFirmwareUploader</string>
<key>CFBundleIdentifier</key>
<string>com.apple.BTFirmwareUploader</string>
<key>CFBundleInfoDictionaryVersion</key>
<string>6.0</string>
<key>CFBundleName</key>
<string>BTFirmwareUploader</string>
<key>CFBundlePackageType</key>
<string>KEXT</string>
<key>CFBundleShortVersionString</key>
<string>1.5</string>
<key>CFBundleSignature</key>
<string>????</string>
<key>CFBundleVersion</key>
<string>1.5</string>
<key>DTCompiler</key>
<string>com.apple.compilers.llvmgcc42</string>
<key>DTPlatformBuild</key>
<string>4H1503</string>
<key>DTPlatformVersion</key>
<string>GM</string>
<key>DTSDKBuild</key>
<string>11E52</string>
<key>DTSDKName</key>
<string>macosx10.7</string>
<key>DTXcode</key>
<string>0463</string>
<key>DTXcodeBuild</key>
<string>4H1503</string>
<key>IOKitPersonalities</key>
<dict>
<key>AzureWave-3404-13d3</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.apple.BTFirmwareUploader</string>
<key>IOClass</key>
<string>BTFirmwareUploader</string>
<key>IOProviderClass</key>
<string>IOUSBDevice</string>
<key>Use BCM Firmware</key>
<true/>
<key>idProduct</key>
<integer>13316</integer>
<key>idVendor</key>
<integer>5075</integer>
</dict>
<key>InfoChange - AzureWave</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.apple.driver.AppleUSBMergeNub</string>
<key>IOClass</key>
<string>AppleUSBMergeNub</string>
<key>IOProviderClass</key>
<string>IOUSBDevice</string>
<key>IOProviderMergeProperties</key>
<dict>
<key>USB Product Name</key>
<string>Broadcom USB Bluetooth 4.0 Controller</string>
<key>idProduct</key>
<integer>13316</integer>
<key>idVendor</key>
<integer>5075</integer>
</dict>
<key>idProduct</key>
<integer>13316</integer>
<key>idVendor</key>
<integer>5075</integer>
</dict>
</dict>
<key>NSHumanReadableCopyright</key>
<string>Copyright © 2012-2013 EMlyDinEsH(OSXLatitude). All rights reserved.</string>
<key>OSBundleLibraries</key>
<dict>
<key>com.apple.iokit.IOUSBFamily</key>
<string>4.5.8</string>
<key>com.apple.kpi.iokit</key>
<string>11.3.0</string>
<key>com.apple.kpi.libkern</key>
<string>11.3.0</string>
</dict>
<key>OSBundleRequired</key>
<string>Root</string>
</dict>
</plist>

I have installed it with kext wizard but bluetooth doesn't go.. still remaining into "Wait for a Bluetooth trackpad - No trackpad found"

 

So, where is my mistake?

 

 You don't need to edit anything here in my kext. You need to inject your ids to Apple Bluetooth kext. You can find details on kext patch here: https://osxlatitude.com/index.php?/topic/1916-the-perfect-mini-pcie-wifi-and-bluetooth-combo-card-for-notebooks/

Share this post


Link to post
Share on other sites
I have AR5B195 and use it on os x mavericks.

 

I install this kext, and when i restart the system, bluetooth works, but now bluetooth not disable, i need unplug the bluetooth when i use my zenbook with battery.

 

Bluetooh works, but you can't unplug it.

 

Captura_de_pantalla_2013_12_27_a_la_s_16

Share this post


Link to post
Share on other sites

No lucky for me with 2.0beta2 :

Bluetooth Firmware Uploader v2.0beta2 by EMlyDinEsH(OSXLatitude) (c) 2012-2013, CREDITS: mac4mat(tonycrapx) and laloch(archlinux)
Bluetooth Firmware Uploader:: Broadcom Bluetooth hardware found
Bluetooth Firmware Uploader:: Using fimrware v5452
Bluetooth Firmware Uploader:: Beginning firmware upload......
Bluetooth Firmware Uploader:: Firmware v5452, buff size 69358
IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
IO80211Interface::efiNVRAMPublished():  
Previous Shutdown Cause: 5
 

TURN ON BLUETOOTH :

 

 

 

Dec 27 17:37:50 Mac kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Resume -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0x5000 ****
Dec 27 17:37:50 Mac.local blued[447]: hostControllerOnline - Number of Paired devices = 1, List of Paired devices = (
    "d8-a2-5e-f9-ef-b0"
)
Dec 27 17:37:55 Mac.local System Preferences[287]: Failed to create connection to the daemon: connection timeout: did not receive reply

 

 

 

PAIRING DEVICE :

 

 

 

Dec 27 17:38:36 Mac kernel[0]: [BNBTrackpadDevice::init][80.14] init is complete
Dec 27 17:38:36 Mac kernel[0]: [BNBTrackpadDevice::handleStart][80.14] returning 1
Dec 27 17:38:36 Mac kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
Dec 27 17:38:36 Mac.local loginwindow[90]: Preferred Localizations total: 1 contents (
    Italian
)
Dec 27 17:38:36 Mac.local System Preferences[287]: An instance 0x6000002080b0 of class AVPlayer was deallocated while key value observers were still registered with it. Observation info was leaked, and may even become mistakenly attached to some other object. Set a breakpoint on NSKVODeallocateBreak to stop here in the debugger. Here's the current observation info:
<NSKeyValueObservationInfo 0x60800005a1c0> (
<NSKeyValueObservance 0x6080002cd7b0: Observer: 0x6080002e4880, Key path: status, Options: <New: NO, Old: NO, Prior: NO> Context: 0x1119d60e8, Property: 0x60000025f6e0>
)
Dec 27 17:38:36 Mac.local System Preferences[287]: An instance 0x600000205410 of class AVPlayer was deallocated while key value observers were still registered with it. Observation info was leaked, and may even become mistakenly attached to some other object. Set a breakpoint on NSKVODeallocateBreak to stop here in the debugger. Here's the current observation info:
<NSKeyValueObservationInfo 0x6000004421f0> (
<NSKeyValueObservance 0x6000002c3250: Observer: 0x6000002e4b00, Key path: status, Options: <New: NO, Old: NO, Prior: NO> Context: 0x1119d60e8, Property: 0x60000025f6e0>
)
Dec 27 17:38:36 Mac.local System Preferences[287]: An instance 0x60000020ad50 of class AVPlayer was deallocated while key value observers were still registered with it. Observation info was leaked, and may even become mistakenly attached to some other object. Set a breakpoint on NSKVODeallocateBreak to stop here in the debugger. Here's the current observation info:
<NSKeyValueObservationInfo 0x600000446cf0> (
<NSKeyValueObservance 0x6000002ca170: Observer: 0x6000000fa600, Key path: status, Options: <New: NO, Old: NO, Prior: NO> Context: 0x1119d60e8, Property: 0x60000025f6e0>
)
Dec 27 17:38:41 Mac kernel[0]: [BNBDevice::staticKickStartTimerFired] Timer fired
Dec 27 17:38:41 Mac kernel[0]: [BNBDevice::staticKickStartTimerFired] ========= Forcing MT restart =========

 

 

 

I've noted that my chipset is different :

Broadcom  Chipset: 20702A3

ID vendor: 0x13D3

ID product: 0x3404

 

 

 

Strange : the apple keyboard wireless works well, but the apple trackpad no ...

 

Apple keyboard: 

 

 

 

Dec 27 17:49:30 Mac kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Resume -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0x8800 ****
Dec 27 17:49:30 Mac.local blued[102]: hostControllerOnline - Number of Paired devices = 0, List of Paired devices = (
)
Dec 27 17:49:48 Mac.local blued[102]: Save link key for device: 28-cf-e9-6d-5e-8c
Dec 27 17:49:51 Mac.local loginwindow[87]: Preferred Localizations total: 1 contents (
    it
)
Dec 27 17:50:06 Mac.local mds[84]: (Warning) Volume: vsd:0x7fb5b4002400 Open failed.  failureCount:4 {
    DisabledRecycleCount = 4;
}
Dec 27 17:50:17 Mac.local CleanMyDrive[268]: Disk description changed (null)
Dec 27 17:50:17 Mac.local CleanMyDrive[268]: Skipped because nobrowse
Dec 27 17:50:17 Mac.local mds[84]: (Normal) Volume: volume:0x7fb5b4803000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/firmwaresyncd.YQC995

 
Trackpad 

Dec 27 17:51:29 Mac.local blued[102]: Save link key for device: d8-a2-5e-f9-ef-b0
Dec 27 17:51:30 Mac kernel[0]: considerRebuildOfPrelinkedKernel prebuild rebuild has expired
Dec 27 17:51:30 Mac kernel[0]: [BNBTrackpadDevice::init][80.14] init is complete
Dec 27 17:51:30 Mac kernel[0]: [BNBTrackpadDevice::handleStart][80.14] returning 1
Dec 27 17:51:30 Mac kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
Dec 27 17:51:30 Mac.local loginwindow[87]: Preferred Localizations total: 1 contents (
    Italian
)
Dec 27 17:51:34 Mac kernel[0]: [BNBTrackpadDevice][waitForData][d8-a2-5e-f9-ef-b0] Timeout waiting for data
Dec 27 17:51:34 Mac kernel[0]: [BNBTrackpadDevice::getExtendedReport][80.14] ERROR: [BNBTrackpadDevice] getReport returned error e00002d6 for reportID 0x0047
Dec 27 17:51:34 Mac kernel[0]: [BNBTrackpadDevice][updateBatteryLevel] Couldn't get battery percentage from device
Dec 27 17:51:34 Mac kernel[0]: [BNBTrackpadDevice][sendData][d8-a2-5e-f9-ef-b0] commandSleep in sendData returned an error
Dec 27 17:51:35 Mac kernel[0]: [BNBDevice::staticKickStartTimerFired] Timer fired
Dec 27 17:51:35 Mac kernel[0]: [BNBDevice::staticKickStartTimerFired] ========= Forcing MT restart =========
Dec 27 17:51:36 Mac kernel[0]: [BNBTrackpadDevice][sendData][d8-a2-5e-f9-ef-b0] commandSleep in sendData returned an error
Dec 27 17:51:36 Mac kernel[0]: [BNBTrackpadDevice][sendData][d8-a2-5e-f9-ef-b0] Became inactive while sending data
Dec 27 17:51:36 Mac kernel[0]: [BNBTrackpadDevice][setReportWL][d8-a2-5e-f9-ef-b0] Could not send DATA command via interrupt channel - 0xE00002D7
Dec 27 17:51:36 Mac kernel[0]: [BNBTrackpadDevice::_resetMultitouchDevice][80.14] ERROR: _simpleSetReport returned error 0xe00002c0
Dec 27 17:51:36 Mac kernel[0]: [BNBTrackpadDevice][waitForData][d8-a2-5e-f9-ef-b0] Became inactive waiting for data
Dec 27 17:51:36 Mac kernel[0]: [BNBTrackpadDevice::getExtendedReport][80.14] ERROR: [BNBTrackpadDevice] getReport returned error e00002d7 for reportID 0x0047
Dec 27 17:51:36 Mac kernel[0]: [BNBTrackpadDevice][updateBatteryLevel] Couldn't get battery percentage from device
Dec 27 17:51:36 Mac.local System Preferences[157]: An instance 0x60000001ae90 of class AVPlayer was deallocated while key value observers were still registered with it. Observation info was leaked, and may even become mistakenly attached to some other object. Set a breakpoint on NSKVODeallocateBreak to stop here in the debugger. Here's the current observation info:
<NSKeyValueObservationInfo 0x608000452d80> (
<NSKeyValueObservance 0x6080002d4f20: Observer: 0x6080002f4c80, Key path: status, Options: <New: NO, Old: NO, Prior: NO> Context: 0x10e60f0e8, Property: 0x600000244950>
)
Dec 27 17:51:36 Mac.local System Preferences[157]: An instance 0x600000206170 of class AVPlayer was deallocated while key value observers were still registered with it. Observation info was leaked, and may even become mistakenly attached to some other object. Set a breakpoint on NSKVODeallocateBreak to stop here in the debugger. Here's the current observation info:
<NSKeyValueObservationInfo 0x60000005e0f0> (
<NSKeyValueObservance 0x6000002cca90: Observer: 0x6080002f4d00, Key path: status, Options: <New: NO, Old: NO, Prior: NO> Context: 0x10e60f0e8, Property: 0x600000244950>
)
Dec 27 17:51:36 Mac.local System Preferences[157]: An instance 0x608000204840 of class AVPlayer was deallocated while key value observers were still registered with it. Observation info was leaked, and may even become mistakenly attached to some other object. Set a breakpoint on NSKVODeallocateBreak to stop here in the debugger. Here's the current observation info:
<NSKeyValueObservationInfo 0x60000005f110> (
<NSKeyValueObservance 0x6000002ce3f0: Observer: 0x6080002f4f00, Key path: status, Options: <New: NO, Old: NO, Prior: NO> Context: 0x10e60f0e8, Property: 0x600000244950>
)
Dec 27 17:51:36 Mac.local System Preferences[157]: An instance 0x608000207840 of class AVPlayer was deallocated while key value observers were still registered with it. Observation info was leaked, and may even become mistakenly attached to some other object. Set a breakpoint on NSKVODeallocateBreak to stop here in the debugger. Here's the current observation info:
<NSKeyValueObservationInfo 0x608000452d80> (
<NSKeyValueObservance 0x6080002d4f20: Observer: 0x6080002f4c80, Key path: status, Options: <New: NO, Old: NO, Prior: NO> Context: 0x10e60f0e8, Property: 0x600000244950>
)
Dec 27 17:51:36 Mac.local System Preferences[157]: An instance 0x6080002087b0 of class AVPlayer was deallocated while key value observers were still registered with it. Observation info was leaked, and may even become mistakenly attached to some other object. Set a breakpoint on NSKVODeallocateBreak to stop here in the debugger. Here's the current observation info:
<NSKeyValueObservationInfo 0x60000005e0f0> (
<NSKeyValueObservance 0x6000002cca90: Observer: 0x6080002f4d00, Key path: status, Options: <New: NO, Old: NO, Prior: NO> Context: 0x10e60f0e8, Property: 0x600000244950>
)
Dec 27 17:51:36 Mac.local System Preferences[157]: An instance 0x6080002081a0 of class AVPlayer was deallocated while key value observers were still registered with it. Observation info was leaked, and may even become mistakenly attached to some other object. Set a breakpoint on NSKVODeallocateBreak to stop here in the debugger. Here's the current observation info:
<NSKeyValueObservationInfo 0x60000005f110> (
<NSKeyValueObservance 0x6000002ce3f0: Observer: 0x6080002f4f00, Key path: status, Options: <New: NO, Old: NO, Prior: NO> Context: 0x10e60f0e8, Property: 0x600000244950>
)
Dec 27 17:51:38 Mac kernel[0]: [BNBTrackpadDevice] notice: _outstandingIO > 0 but isInactive() returned TRUE...
Dec 27 17:51:38 Mac.local loginwindow[87]: Preferred Localizations total: 1 contents (
    Italian

 

 

Share this post


Link to post
Share on other sites

So,

 

i tried to switch Firmware "0" in plist and now works all!

 

Thank YOU!!!

 

 

EDIT : Now tried the firmware in  mode 2 and works well... i haved the low battery in trackpad ahhahaahha i'm so lamah !!! :)

 

THANK YOU THANK YOU!!!!

Share this post


Link to post
Share on other sites

This kext works well on my motherboard (ASUS P8Z68 DELUXE/GEN3) with ASUS AR3011. It's faster than the firmware uploader (ath3k-firmware-uploader-V2, from tonycrap community).

Tried version: v2beta. The firmware used is the default one: Windows: 2, Linux: false.

 

Anyway, I found this lines in my boot sequence:

Jan  5 12:47:59 localhost kernel[0]: Bluetooth Firmware Uploader v2.0beta2 by EMlyDinEsH(OSXLatitude) (c) 2012-2013, CREDITS: mac4mat(tonycrapx) and laloch(archlinux)
Jan  5 12:47:59 localhost kernel[0]: Bluetooth Firmware Uploader:: Atheros Bluetooth hardware found
Jan  5 12:47:59 localhost kernel[0]: Bluetooth Firmware Uploader:: AR3011 Bluetooth detected
Jan  5 12:47:59 localhost kernel[0]: Bluetooth Firmware Uploader:: Firmware not available in RAM, beginning upload
Jan  5 12:47:59 localhost kernel[0]: ath_get_caps[4044] rx chainmask mismatch actual 7 sc_chainmak 0
Jan  5 12:47:59 localhost kernel[0]: 1.012983: ath_get_caps[4019] tx chainmask mismatch actual 7 sc_chainmak 0
Jan  5 12:47:59 localhost kernel[0]: 1.016600: Atheros: mac 448.3 phy 2195.2 radio 0.0
Jan  5 12:47:59 localhost kernel[0]: 1.016608: Use hw queue 0 for WME_AC_BE traffic
Jan  5 12:47:59 localhost kernel[0]: 1.016613: Use hw queue 1 for WME_AC_BK traffic
Jan  5 12:47:59 localhost kernel[0]: 1.016619: Use hw queue 2 for WME_AC_VI traffic
Jan  5 12:47:59 localhost kernel[0]: 1.016624: Use hw queue 3 for WME_AC_VO traffic
Jan  5 12:47:59 localhost kernel[0]: 1.016629: Use hw queue 8 for CAB traffic
Jan  5 12:47:59 localhost kernel[0]: 1.016634: Use hw queue 9 for beacons
Jan  5 12:47:59 localhost kernel[0]: 1.016692: wlan_vap_create : enter. devhandle=0xd1ced6b0, opmode=IEEE80211_M_STA, flags=0x1
Jan  5 12:47:59 localhost kernel[0]: 1.016724: wlan_vap_create : exit. devhandle=0xd1ced6b0, opmode=IEEE80211_M_STA, flags=0x1.
Jan  5 12:47:59 localhost kernel[0]: 1.016753: ATH tunables:
Jan  5 12:47:59 localhost kernel[0]: 1.016756:   pullmode[1] txringsize[  256] txsendqsize[1024] reapmin[   32] reapcount[  128]
Jan  5 12:47:59 localhost kernel[0]: BTFirmwareUploader(0xffffff80124a0000):: unable to get device status
Jan  5 12:47:59 localhost kernel[0]: Bluetooth Firmware Uploader:: Firmware uploaded to RAM Successfully
Jan  5 12:47:59 localhost kernel[0]: Bluetooth Firmware Uploader v2.0beta2 by EMlyDinEsH(OSXLatitude) (c) 2012-2013, CREDITS: mac4mat(tonycrapx) and laloch(archlinux)
Jan  5 12:47:59 localhost kernel[0]: Bluetooth Firmware Uploader:: Atheros Bluetooth hardware found
Jan  5 12:47:59 localhost kernel[0]: Bluetooth Firmware Uploader:: AR3011 Bluetooth detected
Jan  5 12:47:59 localhost kernel[0]: Bluetooth Firmware Uploader:: Firmware not available in RAM, beginning upload
Jan  5 12:47:59 localhost kernel[0]: USBF:    8.291    AppleUSBEHCI::Found a transaction which hasn''t moved in 5000 milliseconds on bus 0x1d, timing out! (Addr: 4, EP: 0)
Jan  5 12:47:59 localhost kernel[0]: BTFirmwareUploader(0xffffff80124a0000):: failed to initiate firmware transfer (-536854447)
Jan  5 12:47:59 localhost kernel[0]: Bluetooth Firmware Uploader:: Firmware uploaded to RAM Successfully

Then these:

Jan  5 12:48:03 localhost kernel[0]: Bluetooth Firmware Uploader v2.0beta2 by EMlyDinEsH(OSXLatitude) (c) 2012-2013, CREDITS: mac4mat(tonycrapx) and laloch(archlinux)
Jan  5 12:48:03 localhost kernel[0]: Bluetooth Firmware Uploader:: Atheros Bluetooth hardware found
Jan  5 12:48:03 localhost kernel[0]: Bluetooth Firmware Uploader:: AR3011 Bluetooth detected
Jan  5 12:48:03 localhost kernel[0]: init
Jan  5 12:48:03 localhost kernel[0]: probe
Jan  5 12:48:03 localhost kernel[0]: start
Jan  5 12:48:03 localhost kernel[0]: DSMOS has arrived
Jan  5 12:48:03 localhost kernel[0]: [IOBluetoothHCIController][start] -- completed
Jan  5 12:48:03 localhost kernel[0]: Bluetooth Firmware Uploader:: Firmware not available in RAM, beginning upload

Then these too:

Jan  5 12:48:09 iMac-di-giofrida kernel[0]: USBF:    30.308    AppleUSBEHCI::Found a transaction which hasn''t moved in 5000 milliseconds on bus 0x1d, timing out! (Addr: 4, EP: 0)
Jan  5 12:48:09 iMac-di-giofrida kernel[0]: BTFirmwareUploader(0xffffff8013666000):: failed to initiate firmware transfer (-536854447)
Jan  5 12:48:09 iMac-di-giofrida kernel[0]: Bluetooth Firmware Uploader:: Firmware uploaded to RAM Successfully
Jan  5 12:48:09 iMac-di-giofrida kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0x1000 ****
Jan  5 12:48:09 iMac-di-giofrida kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0x1000 

full-boot-sequence.rtf

Share this post


Link to post
Share on other sites

Hi, EMlyDinEsH, Thanks for your work, it's great!!!

 

I have got a 2in1 mini pci-e card, it's Dell DW 1550 BCM 94352HMB.

 

The IDs of bluetooth is:

 

Vendor ID: 16700  (hex: 413C) Dell

Product ID: 33091  (hex: 8143)

 

I can't find the IDs in your bluetooth firmware uploader, so I added by myself, it works perfectly.

 

So, Can you add the IDs in your next released uploader?  thanks !!

Share this post


Link to post
Share on other sites
i was wondering if you would help me with my 3012 BT adapter.

 

Here is the info of my BT:

VID: 0x0CF3 PID: 0xE004

 

Thank you very much

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×