tobasa97 Posted March 4, 2015 Share Posted March 4, 2015 Your BT already supported in my kext. Install my kext as i explained in the first post. If you have problems the get me your system log and ioreg. Sorry i have to write you but it doesn't work for me. I installed the kext to S/L/E and during bootup i can see my card being recognized and the firmware being uploaded. It also seems activated but I can't find it on my phone and the notebook doesn't show anything either. Here are some screenshots, that I hope might help: https://www.dropbox.com/sh/7b3u46zq3mz4ydm/AADahHUNMwNjkAw0bRrm_25la?dl=0 Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted March 4, 2015 Administrators Share Posted March 4, 2015 have you tried from a cold boot. restart sometimes does not release the usb bus so that the bus resets hanging the usb devices connected to the bus. Link to comment Share on other sites More sharing options...
tobasa97 Posted March 5, 2015 Share Posted March 5, 2015 I just found out that BTFirmwareUploader isn't permitted by the system. Mar 4 12:42:47 Tobiass-MacBook-Pro.local com.apple.kextcache[417]: BTFirmwareUploader.kext has invalid signature; omitting. Mar 4 12:33:18 Tobiass-MacBook-Pro.local com.apple.kextd[19]: ERROR: invalid signature for org.emlydinesh.driver.BTFirmwareUploader, will not load Mar 4 12:55:28 Tobiass-MacBook-Pro.local com.apple.kextd[19]: ERROR: invalid signature for org.emlydinesh.driver.BTFirmwareUploader, will not load Mar 4 22:54:55 Tobiass-MacBook-Pro.local com.apple.kextd[19]: ERROR: invalid signature for org.emlydinesh.driver.BTFirmwareUploader, will not load Mar 4 23:07:55 Tobiass-MacBook-Pro.local com.apple.kextcache[446]: BTFirmwareUploader.kext has invalid signature; omitting. Mar 4 23:09:35 Tobiass-MacBook-Pro.local com.apple.kextd[19]: ERROR: invalid signature for org.emlydinesh.driver.BTFirmwareUploader, will not load Mar 4 23:11:44 Tobiass-MacBook-Pro.local com.apple.kextd[20]: ERROR: invalid signature for org.emlydinesh.driver.BTFirmwareUploader, will not load Mar 5 08:25:37 Tobiass-MacBook-Pro.local com.apple.kextd[19]: ERROR: invalid signature for org.emlydinesh.driver.BTFirmwareUploader, will not load How can I fix this? Link to comment Share on other sites More sharing options...
sylph93 Posted March 5, 2015 Share Posted March 5, 2015 I tested v2.7 and v2.8 for HP 4530s (AR9285) As far as I discovered, almost every firmware uploader except v2.7 causes instant reboot after wake from sleep. I left this for those who has AR9285 chipset. Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted March 5, 2015 Administrators Share Posted March 5, 2015 if in yosemite are you using the flags kext-dev-mode=1 that should allow third party drivers. Link to comment Share on other sites More sharing options...
tobasa97 Posted March 5, 2015 Share Posted March 5, 2015 if in yosemite are you using the flags kext-dev-mode=1 that should allow third party drivers. I was included in my config from the beginning... Link to comment Share on other sites More sharing options...
lisai9094 Posted March 6, 2015 Share Posted March 6, 2015 Thanks! Version 2.8 works perfect under 10.10. My card is BCM94352. However, bluetooth fails in Windows 8.1 when rebooted from 10.10 warm boot. Cold boot there is no problem for Windows. I suspect the bluetooth firmware is too high for Windows to recognize. Which Windows driver do you use? The broadcom official one? Link to comment Share on other sites More sharing options...
oopsgeneration88 Posted March 9, 2015 Share Posted March 9, 2015 I Have AR2012 With VID: 0cf3 PID: 0036 It Is Along With Atheros AR6565 Wifi But The Wifi Card Isnt Supported May Be U Can Add Handoff Support Too...But I Guess Bluetooth Should Work....I Am Currently On Yosemite Everything Is Working Except Wifi & Bluetooth...I Am Using USB Wifi Instead Link to comment Share on other sites More sharing options...
jkl555 Posted March 9, 2015 Share Posted March 9, 2015 Some updates since my last post. I have two hackintoshes. One Dell e6410 and one PC with Asus Z97i-Plus motherboard. The Asus Z97i-Plus comes with a BCM94352 wifi/BT combo card. Initially I had a bit of problem with the BCM94352 combo card and I eventually buy a USB BT-400 instead. The past two weeks I did some hardware changes. I took out the BCM94352 card from the Asus Z97i-Plus motherboard and swap it with the wifi card of the Dell e6410. The Dell e6410 with the BCM94352 wifi/BT combo card is working very well. No hit and miss so far. Airport and Handoff are working. The only problem is I can't connect it with my logitech v270 bluetooth mouse. EDIT. Forgot to mention I dual boot e6410. The logitech mouse can connect to Windows 7 without any problem. The Z97i-Plus with BT-400 is a hit and miss. If it miss, I can see some 'bluetooth transport not found' message during boot but it is too fast that I can capture it. But if unplug and plug the BT-400, everything is fine. I can connect the logitech v270 bluetooth mouse above to it (so I don't know what's wrong with BCM94352. Maybe it doesn't like that particular mouse). Airport and Handoff are also working. Will look into the Z97i-Plus a bit more to see if I didn't set it up correctly. Link to comment Share on other sites More sharing options...
KariNeko Posted March 15, 2015 Share Posted March 15, 2015 Hi there! On 10.10.2.. System Profiler: Broadcom USB Bluetooth 4.0 Controller (AzureWave CE123H 4352 WiFi/BT combo): Product ID: 0x3404 Vendor ID: 0x13d3 (AzureWave Technologies, Inc.) Version: 1.12 Serial Number: 40E2303AF6B9 Speed: Up to 12 Mb/sec Manufacturer: Broadcom Corp Location ID: 0x14400000 / 8 Current Available (mA): 500 Current Required (mA): 0 DPCI Manager 14E4, 43B1, 1A3B, 2123, Broadcom Corporation, BCM4352 802.11ac Wireless Network Adapter It fails with: 3/14/15 6:29:48.000 PM kernel[0]: BTFirmwareUploader :: Device is Azurewave 4352HMB combo 3/14/15 6:29:48.000 PM kernel[0]: BTFirmwareUploader :: Using device specific firmware v14 c5575 3/14/15 6:29:48.000 PM kernel[0]: BTFirmwareUploader :: Started the upload of firmware (70103 bytes)... 3/14/15 6:29:49.000 PM kernel[0]: USBMSC Identifier (non-unique): 000000264001 0x424 0x4064 0x190, 2 3/14/15 6:29:48.000 PM kernel[0]: BTFirmwareUploader :: Read event failed with a timeout Does somebody have an advice? Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts