Jump to content

Dell Precision 670 - Paxville - BIOS A07 - GT210 black screen (ML & M)


vanguart

Recommended Posts

If you Logout and see the words Safe Mode on the top right corner, then it's in Safe Mode

yes, i just tried it, no safe mode.

 

if i boot just only using -x , get kernel fail

if i boot using -f -x i get descktop (normal mode).

 

what to do now ? i think we are 90%

Link to comment
Share on other sites

  • Replies 84
  • Created
  • Last Reply

Top Posters In This Topic

ML does work with Bronya's ML AMD RC5 kernel as stipulated here my guide. Of course, it won't work with Bronya's Mavericks kernel...

 

There is clearly something wrong with your myHack installation since kexts placed in /E/E cannot be properly installed. Did you delete my hack.kext in /S/L/E as suggested then reinstalled myHack utilities?

yes sir, i did it . step by step .

 

i am using Bronya's ML AMD RC5 kernel , but not yours, , i just download it , old one. from another forum.

Link to comment
Share on other sites

ML does work with Bronya's ML AMD RC5 kernel as stipulated here my guide. Of course, it won't work with Bronya's Mavericks kernel...

 

There is clearly something wrong with your myHack installation since kexts placed in /E/E cannot be properly installed. Did you delete my hack.kext in /S/L/E as suggested then reinstalled myHack utilities?

here is , i got it, cause the system is not in safe mode just now.

if it fail i will pass , i hope you can do DSDT to me

-> https://www.mediafire.com/?cfk2qs6i2gi2osa

localhost:~ pthd10$ lspci -nn
pcilib: 0000:08:00.0 64-bit device address ignored.
pcilib: 0000:08:00.0 64-bit device address ignored.
00:00.0 Host bridge [0600]: Intel Corporation E7525 Memory Controller Hub [8086:359e] (rev 09) 00:00.1 Unassigned class [ff00]: Intel Corporation E7525/E7520 Error Reporting Registers [8086:3591] (rev 09)
00:02.0 PCI bridge [0604]: Intel Corporation E7525/E7520/E7320 PCI Express Port A [8086:3595] (rev 09)
00:03.0 PCI bridge [0604]: Intel Corporation E7525/E7520/E7320 PCI Express Port A1 [8086:3596] (rev 09)
00:04.0 PCI bridge [0604]: Intel Corporation E7525/E7520 PCI Express Port B [8086:3597] (rev 09) 00:1d.0 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02)
00:1d.1 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02)
00:1d.2 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02)
00:1d.3 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02)
00:1d.7 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02)
00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
01:00.0 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A [8086:0329] 01:00.2 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B [8086:032a] 02:0c.0 PCI bridge [0604]: Intel Corporation 21154 PCI-to-PCI Bridge [8086:b154]
03:04.0 Multimedia controller [0480]: Motorola DSP56361 Digital Signal Processor [1057:3410] (rev 01)
03:05.0 Multimedia controller [0480]: Motorola DSP56361 Digital Signal Processor [1057:3410] (rev 01)
03:06.0 Bridge [0680]: PLX Technology, Inc. PCI9030 32-bit 33MHz PCI <-> IOBus Bridge [10b5:9030] (rev 01)
04:0c.0 PCI bridge [0604]: Intel Corporation 21154 PCI-to-PCI Bridge [8086:b154]
04:0d.0 PCI bridge [0604]: Intel Corporation 21154 PCI-to-PCI Bridge [8086:b154]
04:0e.0 Ethernet controller [0200]: Intel Corporation 82545GM Gigabit Ethernet Controller [8086:1026] (rev 04)
05:04.0 Multimedia controller [0480]: Motorola DSP56361 Digital Signal Processor [1057:3410] (rev 01)
05:05.0 Multimedia controller [0480]: Motorola DSP56361 Digital Signal Processor [1057:3410] (rev 01)
05:06.0 Bridge [0680]: PLX Technology, Inc. PCI9030 32-bit 33MHz PCI <-> IOBus Bridge [10b5:9030] (rev 01)
06:04.0 Multimedia controller [0480]: Motorola DSP56361 Digital Signal Processor [1057:3410] (rev 01)
06:05.0 Multimedia controller [0480]: Motorola DSP56361 Digital Signal Processor [1057:3410] (rev 01)
06:06.0 Multimedia controller [0480]: Motorola DSP56361 Digital Signal Processor [1057:3410] (rev 01)
06:07.0 Multimedia controller [0480]: Motorola DSP56361 Digital Signal Processor [1057:3410] (rev 01)
06:08.0 Multimedia controller [0480]: Motorola DSP56361 Digital Signal Processor [1057:3410] (rev 01)
06:09.0 Multimedia controller [0480]: Motorola DSP56361 Digital Signal Processor [1057:3410] (rev 01)
06:0a.0 Multimedia controller [0480]: Motorola DSP56361 Digital Signal Processor [1057:3410] (rev 01)
06:0b.0 Multimedia controller [0480]: Motorola DSP56361 Digital Signal Processor [1057:3410] (rev 01)
06:0c.0 Multimedia controller [0480]: Motorola DSP56361 Digital Signal Processor [1057:3410] (rev 01)
08:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [GeForce 210] [10de:0a65] (rev a2)
08:00.1 Audio device [0403]: NVIDIA Corporation High Definition Audio Controller [10de:0be3] (rev a1)
09:0c.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx] [104c:8023]
localhost:~ pthd10$
Link to comment
Share on other sites

  • Administrators

Regarding the patching your DSDT, please use the attached apps and, assuming you boot WITHOUT any DSDT file:

  1. run IORegistryExplorer and save the output of your IOReg and post it here. Just do a File->Save as when the app opens and shows the IOService info.
  2. run Chameleon Wizard and extract the raw DSDT table, then post it here. Go to DSDT tab, then Compile/Extract and in the lower half, click Save (you won't be able to do that if you've booted with a DSDT file).

IORegistryExplorer.zip Chameleon Wizard.zip

 

 

By the way, what are these Motorola DSP and PLX IO cards listed in your PCI hardware?

Motorola_DSP.png

PLX_IO.png

Link to comment
Share on other sites

That's odd. It seems like your still booting into safe mode. The flag -x=Safe Mode and -f=Ignore Cache. It looks like Hervé, may lead you on a better path since you need to get your DSDT patched for your GPU. I wonder if any of those DSP cards are interfering with your boot up. Maybe you could try booting with those cards installed?

 

yes, i just tried it, no safe mode.

 

if i boot just only using -x , get kernel fail

if i boot using -f -x i get descktop (normal mode).

 

what to do now ? i think we are 90%

Link to comment
Share on other sites

That's odd. It seems like your still booting into safe mode. The flag -x=Safe Mode and -f=Ignore Cache. It looks like Hervé, may lead you on a better path since you need to get your DSDT patched for your GPU. I wonder if any of those DSP cards are interfering with your boot up. Maybe you could try booting with those cards installed?

Dont worry about the 3 cards , it was ok on SL 10.6.8 with Herve boot pack, and in Lion too.

Link to comment
Share on other sites


×
×
  • Create New...