Trunyce Posted September 17, 2014 Author Share Posted September 17, 2014 I made sure to disable the wireless under the bios and I ordered 2 DW1390 wifi card on ebay but I haven't received them yet. Link to comment Share on other sites More sharing options...
Trunyce Posted September 18, 2014 Author Share Posted September 18, 2014 Update: I've received the DW1390 wifi card and replaced it, detected under bios. Still having issue installing the OS. It just reboots after system shutdown cause 5 prompt in verbose boot. Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted September 18, 2014 Administrators Share Posted September 18, 2014 why not just make sure it works at all with a supported OS first like snow or lion in 32 bit arch mode then move up to ml. at least then you know you have the correct bunch of kexts and plists. Link to comment Share on other sites More sharing options...
Trunyce Posted September 18, 2014 Author Share Posted September 18, 2014 That's a good idea, i'll try lion and report back. Link to comment Share on other sites More sharing options...
Administrators Hervé Posted September 18, 2014 Administrators Share Posted September 18, 2014 If you follow my ML guide to the letter, you can't normally go wrong. At least on the initial 64bit initial install (without graphics acceleration). This assumes your initial USB installer is correct and it seems that is not the case... May be you should start by telling us what you did, step by step, not missing anything you did in the process. Link to comment Share on other sites More sharing options...
Trunyce Posted September 20, 2014 Author Share Posted September 20, 2014 Could you please direct me to the guide again? I've been away for a couple days, I'm going to work on it until im successful. Thanks in advance. Link to comment Share on other sites More sharing options...
Administrators Hervé Posted September 20, 2014 Administrators Share Posted September 20, 2014 It's in the guide section... Link to comment Share on other sites More sharing options...
Trunyce Posted September 20, 2014 Author Share Posted September 20, 2014 Soon after i wrote the last post, I found it. I was confused all along in the guide when making the myHack installer usb. I thought I had to copy the bootpack files to myHack usb as soon as it was done. And i read it again and realized that wasn't what i was supposed to do. I managed to get Lion 10.7.0 to install but it's so sluggis and trackpad is so slow and it lags. How do I update to 10.7.5 at this stage now? After i get lion working 100%, my plan is to get mountain lion installed alongside of it. Thanks for all the help guys. Link to comment Share on other sites More sharing options...
Administrators Hervé Posted September 20, 2014 Administrators Share Posted September 20, 2014 If it's sluggish, you're probably not running Lion in 32bit mode. Only 2 ways to update: direct soft update or combo package... Link to comment Share on other sites More sharing options...
Trunyce Posted September 21, 2014 Author Share Posted September 21, 2014 Ok, first thing first. Can i use the same bootpack for lion? If so, do i update first then copy the bootpack extra folder to the root of drive and repair fix permissions? Moreover, i boot in 32bit mode and the white screen comes up before the login screen and the screen just stays black. What's happening? Link to comment Share on other sites More sharing options...
Recommended Posts