carmelovazzana Posted December 9, 2014 Share Posted December 9, 2014 Hi guys, I need your help, my sys was working well, but i enabled trim for my ssd sys disk and something wrong happened, my RAID (Software RAID 0) started to make a recursive access noise, so i tried to fix the problem by re-installing Chameleon, but things got worst, now the sys reach the desktop, but instead of it i have the GSOD. I don't know what to do. boot parameters, -v GraphicEnabler=No Kext-dev-mode=1 System: Intel based, radeon 7970, samsung ssd, 2 x 2tb WD RAID, 32gb ram. Link to comment Share on other sites More sharing options...
carmelovazzana Posted December 9, 2014 Author Share Posted December 9, 2014 I've tried, various flags like -F, PCIRootUID=1\0, npci=0x3000\2000, -x, but nothing!!! Help please, i've got a ton of work to do!!! Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted December 9, 2014 Administrators Share Posted December 9, 2014 try booting from a usb with your bootloader and config files incase osx is having issues reading your config files from raid. hopefull that can get you going till you sort out your issues. Link to comment Share on other sites More sharing options...
carmelovazzana Posted December 9, 2014 Author Share Posted December 9, 2014 Ok, but just in case, OS X isn't on the RAID, it is on an ssd samsung 250gb. I'll give it a try, thanks! Link to comment Share on other sites More sharing options...
carmelovazzana Posted December 9, 2014 Author Share Posted December 9, 2014 I've installed Chameleon on a usb thumb drive but in doesn't boot at all! Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted December 10, 2014 Administrators Share Posted December 10, 2014 have you had that particular usb disk boot chameleon before? not all of them do. also do not forget the extra folder and files/ kexts Link to comment Share on other sites More sharing options...
carmelovazzana Posted December 10, 2014 Author Share Posted December 10, 2014 So, i have to create an installations drive for OS X, can you link me a post? I'm not so concentrated right now! Thanks in advance! Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted December 10, 2014 Moderators Share Posted December 10, 2014 http://myhack.sojugarden.com/guide/ Link to comment Share on other sites More sharing options...
carmelovazzana Posted December 10, 2014 Author Share Posted December 10, 2014 Thanks! Link to comment Share on other sites More sharing options...
carmelovazzana Posted December 10, 2014 Author Share Posted December 10, 2014 Can I use Yosemite? Or just Mavericks? Link to comment Share on other sites More sharing options...
Recommended Posts