MrCarter Posted May 21, 2015 Share Posted May 21, 2015 Hi guys! This time i decided to install OS X 10.10.1 Yosemite on my desktop, which is a Intel Xeon E3-1245V3 with 16GB DDR3 Corsair Vengeance Pro, and a GTX 970 Gigabyte (non G1 version) with windows 8.1 on SSD and a spare old SATA 2 magentic drive for the Yosemite install, So i followed the instructions, and the install went smoothly! No problems at all! But after words and its done, and it restarts, i remove the USB and when it comes back it loads up the Hackintosh Zone Screen with the axe going into the apple, and it has a progress bar, but it doesnt ever seem to move, or go anywhere past that, so i did a -v and it stopped at PCI begin, so i assume thats where the error is? ive tried npci=0x2000/3000 and PCIRootUID=1 and -f/F and a bunch of others, but im up to suggestions so ill try anything to really to get this thing to work. I dont know what else to try, because it shouldnt have any problems all my parts are less than a year old, and they are all compatabile with OS X. If you guys have any suggestions im open to hearing them! I dont know who else out there has this problem but i would love to know how they fixed it if they did. All comments are welcome! Thanks Guys! Link to comment Share on other sites More sharing options...
Administrators Hervé Posted May 21, 2015 Administrators Share Posted May 21, 2015 What's the Hackintosh Zone screen with an axe going through the Apple? Are you using a distro? Link to comment Share on other sites More sharing options...
MrCarter Posted May 22, 2015 Author Share Posted May 22, 2015 Yes, its one i had on hand, and i went to your guys bootpack loader page and you didnt have any for just like a normal system, they were all specializied Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted May 22, 2015 Administrators Share Posted May 22, 2015 what machine is it. it all comes down to your hardware if it's compatible or not. Link to comment Share on other sites More sharing options...
MrCarter Posted May 23, 2015 Author Share Posted May 23, 2015 It is a custom built machine, Motherboard is ASrock Fata1lty Z87 Killer Its CPU is a Intel Xeon E3-1245v3, RAM is Corsair Vengenace Pro 16GB DDR3, It has a GTX 970 Gigabyte non G1 version, it has a Intel Buisness Class AC-Wifi adapter, It also has a Kraken X61 AIO Liquid cooler, with windows 8.1 on a SSD and a magnetic 500GB for storage and then the extra magentic 160GB for the Yosemite install Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted May 23, 2015 Administrators Share Posted May 23, 2015 have you tried PCIRoot=1 npci=0x2000 you can also try booting without your graphics card and using the on board graphics to test Link to comment Share on other sites More sharing options...
Recommended Posts