cooper1 Posted December 21, 2015 Share Posted December 21, 2015 Hallo all, i buy lenovo ideapad s300 and i help to hackintosh with clover my spec is : intel i5 3317u 1.7ghz turbo boost 2.6ghz intel hd 4000 graphics atheros ar9285 wifi display 1366x768 Southbridge Model HM77 Link to comment Share on other sites More sharing options...
cooper1 Posted December 23, 2015 Author Share Posted December 23, 2015 1. intel hd 4000 working fine 2. wifi is working fine 1. I do not have control display brightness 2. i don't have audio Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted December 23, 2015 Administrators Share Posted December 23, 2015 tried using voodoohda? http://sourceforge.net/projects/voodoohda/ you might have to configure the info.plist inside the kext to suit your needs Link to comment Share on other sites More sharing options...
cooper1 Posted December 25, 2015 Author Share Posted December 25, 2015 voodoohda not working ... ii think applehd need some patchiing to work ? also i try to install wiiiith clover again... can anybody to check my dsdt and fix it ? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted December 27, 2015 Moderators Share Posted December 27, 2015 Try this, install with ACPIBacklight.kext for Backlight. Not sure what audio device you have, there might be a patched kext out there already. You could do a codec dump from Linux to determine the exact card. lenovo ideapad s300.aml.zip Link to comment Share on other sites More sharing options...
cooper1 Posted January 11, 2016 Author Share Posted January 11, 2016 Hallo again FANALY after three weeks i was able to install Yosemite 10.10.5 on lenovo s300 with CLOVER !!!!!!!!!!!! //// :) BIG BIG Thanks to Jake Lo for help with DSDT. 1. i have speedstep 1.70 to 2.60 2. intell hd 4000 working good 3. camera working 4. sleep working nothing problem so far 5. wifi working with kexts. 6. audio working with voodoohda but I believe that applehd with patch It can work better....... 7. usb 3 freeze my system if put usb stick or mouse !!! 8. no battery status on my screen of course I need your help to fix........ I write tutorial tomorrow !!! Link to comment Share on other sites More sharing options...
cooper1 Posted January 13, 2016 Author Share Posted January 13, 2016 HWMonitor see me to work only 1 cpu ???? Link to comment Share on other sites More sharing options...
Administrators Hervé Posted January 13, 2016 Administrators Share Posted January 13, 2016 In all likelihood, that'll be a HWMonitor related issue. Your SysProfiler reports 2 cores... Make sure to use the HWMonitor that goes with FakeSMC + all the FakeSMC PlugIns. Kozlek provides full packages on his repositories. Eg: http://sourceforge.net/projects/hwsensors/files/* You do have both Cores enabled in Clover, right? Link to comment Share on other sites More sharing options...
cooper1 Posted January 13, 2016 Author Share Posted January 13, 2016 this is my clover efi . usb3 not work and my freez system after put usb stick for 1min ... i try to upgrade to el capital but no luck Please someone to look if all I have right..... EFI.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted January 13, 2016 Moderators Share Posted January 13, 2016 Add these to EFI kexts for Battery and brightness control. Battery.zip Link to comment Share on other sites More sharing options...
Recommended Posts