mariano Posted March 15, 2016 Author Share Posted March 15, 2016 Then, I did all the various attempts, only two patched config.plist detect audio HDMI. But, it is very strange, the video is disturbed.. sound crackles also .. Crazy .. I do not understand why. Before working. I enclose the working file .. What can it be? P.S the various attempts, I have never added the string attached that before there was. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted March 15, 2016 Moderators Share Posted March 15, 2016 So if you put them all back, it'll work? If that's the case, it could be you're using the wrong ig-platform-id. Try experimenting with different one and matching up the HDMI-audio patches. ie if ig-platform-id = 0x0a2e0008 works then try HDMI-audio, port 0204(12), 0x0a2e0008, 0x0a16000c, 0x0a2e000d, 0x0a26000d Intel HD 4600/5000 (Azul) 0 = 000006041 = 0000060c2 = 000016043 = 0000160a4 = 0000160c5 = 000026046 = 0000260a7 = 0000260c8 = 0000260d9 = 0200160410 = 0300220d11 = 0500260a12 = 0600260a13 = 0700260d14 = 0800260a15 = 08002e0a16 = 04001204 Link to comment Share on other sites More sharing options...
mariano Posted March 15, 2016 Author Share Posted March 15, 2016 What is it? Intel HD 4600/5000 (Azul) 0 = 000006041 = 0000060c2 = 000016043 = 0000160a4 = 0000160c5 = 000026046 = 0000260a7 = 0000260c8 = 0000260d9 = 0200160410 = 0300220d11 = 0500260a12 = 0600260a13 = 0700260d14 = 0800260a15 = 08002e0a16 = 04001204 Can you give examples of config.plist? Anyway if I put again config.plist, when I told you that everything worked, Now it does not work .. What can it be? config.plist(before_work_now_no).zip IOREG_before_work_now_no.zip Link to comment Share on other sites More sharing options...
mariano Posted March 15, 2016 Author Share Posted March 15, 2016 I tried, with all combinations, to include in config.plist, appropriate location, the listed strings (below). The HDMI audio will always works, but the video is still noise. According to me does not depend on this, the noise in the video.. Some idea? 1) ig-platform-id = 0x0a2e0008 HDMI-audio, port 0204(12), 0x0a2e0008, 0x0a16000c, 0x0a2e000d, 0x0a26000d 2) ig-platform-id = 0x0a16000c HDMI-audio, port 0204(12), 0x0a2e0008, 0x0a16000c, 0x0a2e000d, 0x0a26000d 3) ig-platform-id = 0x0a2e000d HDMI-audio, port 0204(12), 0x0a2e0008, 0x0a16000c, 0x0a2e000d, 0x0a26000d 4) ig-platform-id = 0x0a26000d HDMI-audio, port 0204(12), 0x0a2e0008, 0x0a16000c, 0x0a2e000d, 0x0a26000d Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted March 16, 2016 Moderators Share Posted March 16, 2016 It makes no difference because you still have 0x0a260006 patched in the DSDT. Remove that and you should be able to see some changes with the Config. Link to comment Share on other sites More sharing options...
mariano Posted March 16, 2016 Author Share Posted March 16, 2016 How do I remove the string 0x0a260006 from dsdt? I attach it P.S about the bluetooth you have any solution? see post 33, 34 .. Thank you very much DSDT.aml.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted March 16, 2016 Moderators Share Posted March 16, 2016 Here you go, rename to DSDT.aml DSDT-new.aml.zip 1 Link to comment Share on other sites More sharing options...
mariano Posted March 16, 2016 Author Share Posted March 16, 2016 Hello, then I did some tests.I put the dsdt.aml you gave me.Then in config.plist (now I enclose) I tried, in the string " ig-platform-id = XxXXXXXXXX " (X to the various numbers and corresponding letters), all possible strings (one at a time)These are the strings that I replaced:1) 0x0a260005 (Work HDMI audio)2) 0x0a260006 (Work HDMI audio)3) 0x0d220003 (PC does not start)4) 0x0a2e000a (Work HDMI audio)5) 0x0a26000a (Work HDMI audio)6) 0x0a2e0008 (HDMI audio does not work)7) 0x0a16000c (HDMI audio does not work)8) 0x0a2e000d (PC does not start)9) 0x0a26000d (PC does not start)PS: In the strings where HDMI audio works, video always shows the video noise (Example: lines, etc .. I do not know if it matters, but video noise increases when, for example, by on safari or chrome, and I open for example a song on youtube ..) P.S I also tried 16 config.plist I arranged for each string, but nothing same problem (I attach the file named: Test_16_config.plist") Some solutions?Thanks config.plist.zip Test_16_ config.plist.zip Link to comment Share on other sites More sharing options...
mariano Posted March 16, 2016 Author Share Posted March 16, 2016 Then I understood where he was the problem! I solved HDMI video and audio Now it works very well. I modified SMBIOS 3.1 to 11.2 and patched with "port" HDMI audio. (I attach the new config.plist).Unfortunately now going from SMBIOS 3.1 to 11.2 I have new problems 1) It works only a USB port on my PC. In total there are 4.2) Built-in camera does not work (is not recognized) (I include photos)3) strange boot screen. (I include photos)4) In the opening screen (where you have to put the password to access) the touch pad does not move (I've just seen that waiting a little bit, then it works)5) Computer in stop don't work (The PC does not wake up more)Some solutions?Thank you very much for the support IOREG_news.zip Resoconto_system_news.zip DSDT(used).aml.zip config_work_video_audio_HDMI.plist.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted March 16, 2016 Moderators Share Posted March 16, 2016 The boot screen is not an issue, it's just the theme osxlatitude doesn't exist in your theme folder so it uses a random theme. The webcam is an USB issue. Try these files. Includes 2 DSDT to try. Rename to DSDT each time. USBfix.zip Link to comment Share on other sites More sharing options...
Recommended Posts