Jump to content

E5430 (10.11.5, Clover) - problems


PetiG87

Recommended Posts

  • Administrators

Intel i3-2328M is indeed a SandyBridge CPU with integrated Intel HD 3000 graphics. As such, you should be opting for a SandyBridge SMBIOS such as MBP8,1/MBP8,2. Make sure your DSDT injects a SandyBridge (HD3000) layout-id, not a Capri (HD4000) one.

Link to comment
Share on other sites

Replace bootpack with this.

 

Thanks Jake. Here is the clover i built with your generic efi and and the bootpack you just linked. I just want to make sure I'm putting everything together correctly.

https://drive.google.com/file/d/0BwGYthmHWgIsV2VOVjZ1MGZoMGM/view?usp=sharing

 

And now I'm getting this:

https://drive.google.com/file/d/0BwGYthmHWgIsOGwwV3BxcGxHdzQ/view?usp=sharing

Link to comment
Share on other sites

  • Moderators

It's missing the Kexts folder.

Let's start over.

With the current Config file, you should be able to boot and install OS X. 

The DSDT is for E6230 with HD 3000. So remove the DSDT from ACPI/Patched

Boot to Clover GUI, hit F4, then compress the ACPI/Origin folder and attach it here.

 

Also want to verify the system's specs

LAN= Intel or Broadcom?

Audio=92HD90 or 92HD93? You can check the bios for that

SDCard reader, does it have one? is it an O2 Micro?

HDMI?

 

Once I have all the info, I'll create a new bootpack for you, specific to your system.

Link to comment
Share on other sites

×
×
  • Create New...