ioncatana Posted September 20, 2016 Share Posted September 20, 2016 First a very big thx to osxlatitude! Without them, none of these could be done! This installation of El Capitan 10.11.6 is based on Clover (EFI). I have downloaded the bootpack for D630 from EDP, still the USB were not working at all. After patching the DSDT the Bluetooth stopped working. Now two of the USB ports are working and bluetooth as well. The only thing that is missing, is to make the other two USB ports work. Here I will need your DSDT patching experience / skills The Dockingstation works very good even with Hot Plug (in & out) while the system is running. >>Hardware<< CPU: 1,99 GHz Intel Core 2 Duo RAM: 2GB GPU: nVidia Quadro NVS 135M 128MB LAN: Gigabit Sound: Sigmatel 9505 Bluetooth: 2.0 WLAN: Atheros AR5B91 >>What Works<< GPU: Clover Injection LAN: BCM5722D Bluetooth: DSDT-Patch USB-Ports: DSDT-Patch ( right side: upper | back side: left ) Battery: ACPIBatteryManager.kext Keyboard+Touchpad: AppleACPIPS2Nub.kext & ApplePS2Controller.kext Audio: VoodooHDA ( still the noise here is a bit strange sometimes ) Dockingstation: all 3 USB on the back works Dockingstation: DVI Connector on the back works Dockingstation: LAN Port on the back works Sleep: works ( closing the LID ) >>What Doesn't Work<< USB-Ports: right side: lower | back side: right ( perhaps you can help me here with a DSDT path ) Other Features and Components I have not tested! >>Attachments<< config.plist ( MacBookPro5,1 ) DSDT.aml ( no need for USB-Injection / USB-Fix ) D630-HwInfo.html ( Hardware Information of my machine ) Dockingstation with DVI: USB on the Laptop: USB on the Dockingstation: Bluetooth working + LAN-Dokingstation working: D630-HwInfo.htm config.plist.zip DSDT.aml.zip Link to comment Share on other sites More sharing options...
Administrators Hervé Posted October 23, 2016 Administrators Share Posted October 23, 2016 Re: USB ports, grab the USB injector off my D630n ElCapitan 10.11 pack. Make sure to: modify the DSDT and rename USB2.0 controller devices from EHCx to EH0x use MacBookPro5,1 SMBIOS Link to comment Share on other sites More sharing options...
Recommended Posts