Moderators Jake Lo Posted December 22, 2016 Moderators Share Posted December 22, 2016 See here regarding M6700 with FirePro M6000. I think he's also part of this forum (TIMP74). Try asking him for guidance. 1 Link to comment Share on other sites More sharing options...
deadman1007 Posted December 22, 2016 Author Share Posted December 22, 2016 will do. I haw one more issue to address and I'm happy with how thing are, then I will try to enable amd graphics when I power my laptop OS X just stays halfway loading, but when I boot windows first and reboot it boots fine, also when I reboot from OS X it loads, problem is only after shutting down. pic shows verbos boot when it just sits and nothing happens Link to comment Share on other sites More sharing options...
vanquybn Posted December 23, 2016 Share Posted December 23, 2016 You should shutdown windows first before switch to OSX Link to comment Share on other sites More sharing options...
deadman1007 Posted December 23, 2016 Author Share Posted December 23, 2016 but only way to start OS X after shut down was by starting windows first and then restart to OS X but I managed to solve the, problem was in ssdt.aml generated be ssdtPRGN, so I removed it and instead used generate P and C states in clover, and now my laptop starts from shut down with no problem and cpu scales as it should from 1,6 to 2,6 Link to comment Share on other sites More sharing options...
Administrators Hervé Posted December 23, 2016 Administrators Share Posted December 23, 2016 You do not have proper CPU SpeedStep without SSDT-based adequate power management SSDT. Instead, what you see is LFM and HFM, i.e. only the lowest and highest nominal frequencies with no intermediate speeds and no Turbo boost at all. You need to generate and use the CPU-specific SSDT in order to enjoy native CPU SpeedStep, i.e. intermediate speeds between LFM and HFM + Turbo boost between HFM and max Turbo speed. Link to comment Share on other sites More sharing options...
deadman1007 Posted January 22, 2017 Author Share Posted January 22, 2017 Again it seams I need help... Im trying to get my m6000 graphics to work but can't find correct fb to work with. I have attached my radeon and redsock output any ideas would be great output-vbios.rtf Link to comment Share on other sites More sharing options...
RocketMandrake Posted March 22, 2018 Share Posted March 22, 2018 Hi there! Are your USB 3.0 port working properly?I have a m6700 but the USB 3.0 doesn't even shows up :/ Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted March 22, 2018 Moderators Share Posted March 22, 2018 Try adding USBInjectAll.kext and the 15 port limit patch for the OS you're running Link to comment Share on other sites More sharing options...
RocketMandrake Posted January 14, 2019 Share Posted January 14, 2019 Hi there! Any luck yet getting the DSDT patch and the USB 3.0 ports working on dell precision the m6700? Link to comment Share on other sites More sharing options...
Recommended Posts